AWS Systems Manager Change Manager is no longer open to new customers. Existing customers can continue to use the service as normal. For more information, see AWS Systems Manager Change Manager availability change.

Integrating Patch Manager with AWS Security Hub CSPM

AWS Security Hub CSPM provides you with a comprehensive view of your security state in AWS. Security Hub CSPM collects security data from across AWS accounts, AWS services, and supported third-party partner products. With Security Hub CSPM, you can check your environment against security industry standards and best practices. Security Hub CSPM helps you to analyze your security trends and identify the highest priority security issues.

By using the integration between Patch Manager, a tool in AWS Systems Manager, and Security Hub CSPM, you can send findings about noncompliant nodes from Patch Manager to Security Hub CSPM. A finding is the observable record of a security check or security-related detection. Security Hub CSPM can then include those patch-related findings in its analysis of your security posture.

The information in the following topics applies no matter which method or type of configuration you are using for your patching operations:

How Patch Manager sends findings to Security Hub CSPM

In Security Hub CSPM, security issues are tracked as findings. Some findings come from issues that are detected by other AWS services or by third-party partners. Security Hub CSPM also has a set of rules that it uses to detect security issues and generate findings.

Patch Manager is one of the Systems Manager tools that sends findings to Security Hub CSPM. After you perform a patching operation by running a SSM document (AWS-RunPatchBaseline, AWS-RunPatchBaselineAssociation, or AWS-RunPatchBaselineWithHooks), the patching information is sent to Inventory or Compliance, tools in AWS Systems Manager, or both. After Inventory, Compliance, or both receive the data, Patch Manager receives a notification. Then, Patch Manager evaluates the data for accuracy, formatting, and compliance. If all conditions are met, Patch Manager forwards the data to Security Hub CSPM.

Security Hub CSPM provides tools to manage findings from across all of these sources. You can view and filter lists of findings and view details for a finding. For more information, see Viewing findings in the AWS Security Hub CSPM User Guide. You can also track the status of an investigation into a finding. For more information, see Taking action on findings in the AWS Security Hub CSPM User Guide.

All findings in Security Hub CSPM use a standard JSON format called the AWS Security Finding Format (ASFF). The ASFF includes details about the source of the issue, the affected resources, and the current status of the finding. For more information, see AWS Security Finding Format (ASFF) in the AWS Security Hub CSPM User Guide.

Types of findings that Patch Manager sends

Patch Manager sends the findings to Security Hub CSPM using the AWS Security Finding Format (ASFF). In ASFF, the Types field provides the finding type. Findings from Patch Manager have the following value for Types:

Patch Manager sends one finding per noncompliant managed node. The finding is reported with the resource type AwsEc2Instance so that findings can be correlated with other Security Hub CSPM integrations that report AwsEc2Instance resource types. Patch Manager only forwards a finding to Security Hub CSPM if the operation discovered the managed node to be noncompliant. The finding includes the Patch Summary results.

For more information about compliance definitions, see Patch compliance state values. For more information about PatchSummary, see PatchSummary in the AWS Security Hub CSPM API Reference.

Latency for sending findings

When Patch Manager creates a new finding, it's usually sent to Security Hub CSPM within a few seconds to 2 hours. The speed depends on the traffic in the AWS Region being processed at that time.

Retrying when Security Hub CSPM isn't available

If there is a service outage, an AWS Lambda function is run to put the messages back into the main queue after the service is running again. After the messages are in the main queue, the retry is automatic.

If Security Hub CSPM isn't available, Patch Manager retries sending the findings until they're received.

Viewing findings in Security Hub CSPM

This procedure describes how to view findings in Security Hub CSPM about managed nodes in your fleet that are out of patch compliance.

Severity classifications

The list of findings for Systems Manager Patch Manager includes a report of the severity of the finding. Severity levels include the following, from lowest to highest:

Severity is determined by the most severe noncompliant package on an instance. Because you can have multiple patch baselines with multiple severity levels, the highest severity is reported out of all the noncompliant packages. For example, suppose you have two noncompliant packages where the severity of package A is "Critical" and the severity of package B is "Low". "Critical" will be reported as the severity.

Note that the severity field correlates directly with the Patch Manager Compliance field. This is a field that you set assign to individual patches that match the rule. Because this Compliance field is assigned to individual patches, it is not reflected at the Patch Summary level.

Related content

Typical finding from Patch Manager

Patch Manager sends findings to Security Hub CSPM using the AWS Security Finding Format (ASFF).

Here is an example of a typical finding from Patch Manager.

{
  "SchemaVersion": "2018-10-08",
  "Id": "arn:aws:patchmanager:us-east-2:111122223333:instance/i-02573cafcfEXAMPLE/document/AWS-RunPatchBaseline/run-command/d710f5bd-04e3-47b4-82f6-df4e0EXAMPLE",
  "ProductArn": "arn:aws:securityhub:us-east-1::product/aws/ssm-patch-manager",
  "GeneratorId": "d710f5bd-04e3-47b4-82f6-df4e0EXAMPLE",
  "AwsAccountId": "111122223333",
  "Types": [
    "Software & Configuration Checks/Patch Management/Compliance"
  ],
  "CreatedAt": "2021-11-11T22:05:25Z",
  "UpdatedAt": "2021-11-11T22:05:25Z",
  "Severity": {
    "Label": "INFORMATIONAL",
    "Normalized": 0
  },
  "Title": "Systems Manager Patch Summary - Managed Instance Non-Compliant",
  "Description": "This AWS control checks whether each instance that is managed by AWS Systems Manager is in compliance with the rules of the patch baseline that applies to that instance when a compliance Scan runs.",
  "Remediation": {
    "Recommendation": {
      "Text": "For information about bringing instances into patch compliance, see 'Remediating out-of-compliance instances (Patch Manager)'.",
      "Url": "https://docs.aws.amazon.com/systems-manager/latest/userguide/patch-compliance-remediation.html"
    }
  },
  "SourceUrl": "https://us-east-2.console.aws.amazon.com/systems-manager/fleet-manager/i-02573cafcfEXAMPLE/patch?region=us-east-2",
  "ProductFields": {
    "aws/securityhub/FindingId": "arn:aws:securityhub:us-east-2::product/aws/ssm-patch-manager/arn:aws:patchmanager:us-east-2:111122223333:instance/i-02573cafcfEXAMPLE/document/AWS-RunPatchBaseline/run-command/d710f5bd-04e3-47b4-82f6-df4e0EXAMPLE",
    "aws/securityhub/ProductName": "Systems Manager Patch Manager",
    "aws/securityhub/CompanyName": "AWS"
  },
  "Resources": [
    {
      "Type": "AwsEc2Instance",
      "Id": "i-02573cafcfEXAMPLE",
      "Partition": "aws",
      "Region": "us-east-2"
    }
  ],
  "WorkflowState": "NEW",
  "Workflow": {
    "Status": "NEW"
  },
  "RecordState": "ACTIVE",
  "PatchSummary": {
    "Id": "pb-0c10e65780EXAMPLE",
    "InstalledCount": 45,
    "MissingCount": 2,
    "FailedCount": 0,
    "InstalledOtherCount": 396,
    "InstalledRejectedCount": 0,
    "InstalledPendingReboot": 0,
    "OperationStartTime": "2021-11-11T22:05:06Z",
    "OperationEndTime": "2021-11-11T22:05:25Z",
    "RebootOption": "NoReboot",
    "Operation": "SCAN"
  }
}

Turning on and configuring the integration

To use the Patch Manager integration with Security Hub CSPM, you must turn on Security Hub CSPM. For information about how to turn on Security Hub CSPM, see Setting up Security Hub CSPM in the AWS Security Hub CSPM User Guide.

The following procedure describes how to integrate Patch Manager and Security Hub CSPM when Security Hub CSPM is already active but Patch Manager integration is turned off. You only need to complete this procedure if integration was manually turned off.

How to stop sending findings

To stop sending findings to Security Hub CSPM, you can use either the Security Hub CSPM console or the API.

For more information, see the following topics in the AWS Security Hub CSPM User Guide: