Setting up a SMPTE 2110 input using NMOS
Follow this procedure if you have a SMPTE 2110 source and your organization uses NMOS IS-04 and IS-05.
Note
This section assumes that you have read Working with SMPTE 2110 and are familiar with how SMPTE 2110 works and with its prerequisites.
You must enable NMOS on the appliance, as a one-time action. Then the setup of a SMPTE 2110 source is a two-step process. First, you create a 2110 receiver group to replicate the SMPTE 2110 receivers in Elemental Live. Then in the event, you create an input that uses the 2110 receiver group. In this way, a SMPTE 2110 source is similar to an SDI source, which is represented in Elemental Live by an SDI device that is used by an SDI input.
Topics
