VpnConnectionOptionsSpecification

Indicate whether to enable acceleration for the VPN connection.

Default: false

Type: Boolean

Required: No

The IPv4 CIDR on the customer gateway (on-premises) side of the VPN connection.

Default: 0.0.0.0/0

Type: String

Required: No

The IPv6 CIDR on the customer gateway (on-premises) side of the VPN connection.

Default: ::/0

Type: String

Required: No

The type of IP address assigned to the outside interface of the customer gateway device.

Valid values: PrivateIpv4 | PublicIpv4 | Ipv6

Default: PublicIpv4

Type: String

Required: No

The IPv4 CIDR on the AWS side of the VPN connection.

Default: 0.0.0.0/0

Type: String

Required: No

The IPv6 CIDR on the AWS side of the VPN connection.

Default: ::/0

Type: String

Required: No

Indicate whether the VPN connection uses static routes only. If you are creating a VPN connection for a device that does not support BGP, you must specify true. Use CreateVpnConnectionRoute to create a static route.

Default: false

Type: Boolean

Required: No

The transit gateway attachment ID to use for the VPN tunnel.

Required if OutsideIpAddressType is set to PrivateIpv4.

Type: String

Required: No

The desired bandwidth specification for the VPN tunnel, used when creating or modifying VPN connection options to set the tunnel's throughput capacity. standard supports up to 1.25 Gbps per tunnel, while large supports up to 5 Gbps per tunnel. The default value is standard. Existing VPN connections without a bandwidth setting will automatically default to standard.

Type: String

Valid Values: standard | large

Required: No

Indicate whether the VPN tunnels process IPv4 or IPv6 traffic.

Default: ipv4

Type: String

Valid Values: ipv4 | ipv6

Required: No

The tunnel options for the VPN connection.

Type: Array of VpnTunnelOptionsSpecification objects

Required: No