Create a receiver group input - AWS Elemental Live

Create a receiver group input

You must create a receiver group input that connects to the appropriate SMPTE 2110 receiver streams.

Note

The information in this section assumes that you are familiar with the general steps for creating a Elemental Live event or Conductor Live channel.

  1. From the Input menu in the Elemental Live event or Conductor Live profile, select the receiver group that you created. The list of receiver groups appears at the top of the dropdown list.

    Or if you are using AWS Elemental Conductor Live, in the Input Type field on the Conductor Live profile, select the receiver group that you created.

    Note

    Don't select SMPTE 2110 Input, which is an option that appears at the bottom of the list.

  2. Click Advanced to show more fields for this input. Scroll down to the selectors section of this input. Complete the selectors as follows:

    • Video Selector: Leave the single selector that appears by default. Ignore the Program and PID fields, which don't apply to SMPTE 2110 NMOS inputs. Complete the other fields as applicable.

    • Audio Selector: Click Add Audio Selector to display as many selectors as you need. For example, following the examples in Create the receiver group, you need three selectors.

      If the receiver group has more than one audio SDP, you must complete these fields:

      • Selector Type: Choose Track.

      • Track: Enter the track. Following the first example in Create the receiver group, enter 1 to identify the English audio, 2 to identify the French audio, and 3 to enter the Spanish audio. It doesn't matter if the audios are all in the same SDP or different SDPs, the audio streams are always numbered in SDP order, starting from 1.

  3. Click Add Caption Selector once. Make sure Source specifies Embedded. Ignore the other fields on this line, they don't apply to passing through embedded captions.