UpdateNFSFileShare - Storage Gateway
Request SyntaxRequest ParametersResponse SyntaxResponse ElementsErrorsExamplesSee Also

UpdateNFSFileShare

Updates a Network File System (NFS) file share. This operation is only supported in S3 File Gateways.

Note

To leave a file share field unchanged, set the corresponding input field to null.

Updates the following file share settings:

  • Default storage class for your S3 bucket

  • Metadata defaults for your S3 bucket

  • Allowed NFS clients for your file share

  • Squash settings

  • Write status of your file share

Request Syntax

{
   "AuditDestinationARN": "string",
   "CacheAttributes": { 
      "CacheStaleTimeoutInSeconds": number
   },
   "ClientList": [ "string" ],
   "DefaultStorageClass": "string",
   "EncryptionType": "string",
   "FileShareARN": "string",
   "FileShareName": "string",
   "GuessMIMETypeEnabled": boolean,
   "KMSEncrypted": boolean,
   "KMSKey": "string",
   "NFSFileShareDefaults": { 
      "DirectoryMode": "string",
      "FileMode": "string",
      "GroupId": number,
      "OwnerId": number
   },
   "NotificationPolicy": "string",
   "ObjectACL": "string",
   "ReadOnly": boolean,
   "RequesterPays": boolean,
   "Squash": "string"
}

Request Parameters

For information about the parameters that are common to all actions, see Common Parameters.

The request accepts the following data in JSON format.

AuditDestinationARN

The Amazon Resource Name (ARN) of the storage used for audit logs.

Type: String

Length Constraints: Maximum length of 1024.

Required: No

CacheAttributes

Specifies refresh cache information for the file share.

Type: CacheAttributes object

Required: No

ClientList

The list of clients that are allowed to access the S3 File Gateway. The list must contain either valid IPv4/IPv6 addresses or valid CIDR blocks.

Type: Array of strings

Array Members: Minimum number of 1 item. Maximum number of 100 items.

Pattern: ^(?:(?:[0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}(?:[0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])(?:\/(?:[0-9]|[1-2][0-9]|3[0-2]))?$|^(?:(?:(?:[A-Fa-f0-9]{1,4}:){6}|(?=(?:[A-Fa-f0-9]{0,4}:){0,6}(?:[0-9]{1,3}\.){3}[0-9]{1,3}(?![:.\w]))(?:(?:[0-9A-Fa-f]{1,4}:){0,5}|:)(?:(?::[0-9A-Fa-f]{1,4}){1,5}:|:)|::(?:[A-Fa-f0-9]{1,4}:){5})(?:(?:25[0-5]|2[0-4][0-9]|1[0-9][0-9]|[1-9]?[0-9])\.){3}(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)|(?:[A-Fa-f0-9]{1,4}:){7}[A-Fa-f0-9]{1,4}|(?=(?:[A-Fa-f0-9]{0,4}:){0,7}[A-Fa-f0-9]{0,4}(?![:.\w]))(?:(?:[0-9A-Fa-f]{1,4}:){1,7}|:)(?:(:[0-9A-Fa-f]{1,4}){1,7}|:)|(?:[A-Fa-f0-9]{1,4}:){7}:|:(:[A-Fa-f0-9]{1,4}){7})(?:\/(?:12[0-8]|1[01][0-9]|[1-9]?[0-9]))?$

Required: No

DefaultStorageClass

The default storage class for objects put into an Amazon S3 bucket by the S3 File Gateway. The default value is S3_STANDARD. Optional.

Valid Values: S3_STANDARD | S3_INTELLIGENT_TIERING | S3_STANDARD_IA | S3_ONEZONE_IA

Type: String

Length Constraints: Minimum length of 5. Maximum length of 50.

Required: No

EncryptionType

A value that specifies the type of server-side encryption that the file share will use for the data that it stores in Amazon S3.

Note

We recommend using EncryptionType instead of KMSEncrypted to set the file share encryption method. You do not need to provide values for both parameters.

If values for both parameters exist in the same request, then the specified encryption methods must not conflict. For example, if EncryptionType is SseS3, then KMSEncrypted must be false. If EncryptionType is SseKms or DsseKms, then KMSEncrypted must be true.

Type: String

Valid Values: SseS3 | SseKms | DsseKms

Required: No

FileShareARN

The Amazon Resource Name (ARN) of the file share to be updated.

Type: String

Length Constraints: Minimum length of 50. Maximum length of 500.

Required: Yes

FileShareName

The name of the file share. Optional.

Note

FileShareName must be set if an S3 prefix name is set in LocationARN, or if an access point or access point alias is used.

A valid NFS file share name can only contain the following characters: a-z, A-Z, 0-9, -, ., and _.

Type: String

Length Constraints: Minimum length of 1. Maximum length of 255.

Required: No

GuessMIMETypeEnabled

A value that enables guessing of the MIME type for uploaded objects based on file extensions. Set this value to true to enable MIME type guessing, otherwise set to false. The default value is true.

Valid Values: true | false

Type: Boolean

Required: No

KMSEncrypted

This parameter has been deprecated.

Optional. Set to true to use Amazon S3 server-side encryption with your own AWS KMS key (SSE-KMS), or false to use a key managed by Amazon S3 (SSE-S3). To use dual-layer encryption (DSSE-KMS), set the EncryptionType parameter instead.

Note

We recommend using EncryptionType instead of KMSEncrypted to set the file share encryption method. You do not need to provide values for both parameters.

If values for both parameters exist in the same request, then the specified encryption methods must not conflict. For example, if EncryptionType is SseS3, then KMSEncrypted must be false. If EncryptionType is SseKms or DsseKms, then KMSEncrypted must be true.

Valid Values: true | false

Type: Boolean

Required: No

KMSKey

Optional. The Amazon Resource Name (ARN) of a symmetric AWS KMS key used for Amazon S3 server-side encryption. Storage Gateway does not support asymmetric KMS keys. This value must be set if KMSEncrypted is true, or if EncryptionType is SseKms or DsseKms.

Type: String

Length Constraints: Minimum length of 7. Maximum length of 2048.

Pattern: (^arn:(aws(|-cn|-us-gov|-iso[A-Za-z0-9_-]*)):kms:([a-zA-Z0-9-]+):([0-9]+):(key|alias)/(\S+)$)|(^alias/(\S+)$)

Required: No

NFSFileShareDefaults

The default values for the file share. Optional.

Type: NFSFileShareDefaults object

Required: No

NotificationPolicy

The notification policy of the file share. SettlingTimeInSeconds controls the number of seconds to wait after the last point in time a client wrote to a file before generating an ObjectUploaded notification. Because clients can make many small writes to files, it's best to set this parameter for as long as possible to avoid generating multiple notifications for the same file in a small time period.

Note

SettlingTimeInSeconds has no effect on the timing of the object uploading to Amazon S3, only the timing of the notification.

This setting is not meant to specify an exact time at which the notification will be sent. In some cases, the gateway might require more than the specified delay time to generate and send notifications.

The following example sets NotificationPolicy on with SettlingTimeInSeconds set to 60.

{\"Upload\": {\"SettlingTimeInSeconds\": 60}}

The following example sets NotificationPolicy off.

{}

Type: String

Length Constraints: Minimum length of 2. Maximum length of 100.

Pattern: ^\{[\w\s:\{\}\[\]"]*}$

Required: No

ObjectACL

A value that sets the access control list (ACL) permission for objects in the S3 bucket that a S3 File Gateway puts objects into. The default value is private.

Type: String

Valid Values: private | public-read | public-read-write | authenticated-read | bucket-owner-read | bucket-owner-full-control | aws-exec-read

Required: No

ReadOnly

A value that sets the write status of a file share. Set this value to true to set the write status to read-only, otherwise set to false.

Valid Values: true | false

Type: Boolean

Required: No

RequesterPays

A value that sets who pays the cost of the request and the cost associated with data download from the S3 bucket. If this value is set to true, the requester pays the costs; otherwise, the S3 bucket owner pays. However, the S3 bucket owner always pays the cost of storing data.

Note

RequesterPays is a configuration for the S3 bucket that backs the file share, so make sure that the configuration on the file share is the same as the S3 bucket configuration.

Valid Values: true | false

Type: Boolean

Required: No

Squash

The user mapped to anonymous user.

Valid values are the following:

  • RootSquash: Only root is mapped to anonymous user.

  • NoSquash: No one is mapped to anonymous user.

  • AllSquash: Everyone is mapped to anonymous user.

Type: String

Length Constraints: Minimum length of 5. Maximum length of 15.

Required: No

Response Syntax

{
   "FileShareARN": "string"
}

Response Elements

If the action is successful, the service sends back an HTTP 200 response.

The following data is returned in JSON format by the service.

FileShareARN

The Amazon Resource Name (ARN) of the updated file share.

Type: String

Length Constraints: Minimum length of 50. Maximum length of 500.

Errors

For information about the errors that are common to all actions, see Common Errors.

InternalServerError

An internal server error has occurred during the request. For more information, see the error and message fields.

error

A StorageGatewayError that provides more information about the cause of the error.

message

A human-readable message describing the error that occurred.

HTTP Status Code: 400

InvalidGatewayRequestException

An exception occurred because an invalid gateway request was issued to the service. For more information, see the error and message fields.

error

A StorageGatewayError that provides more detail about the cause of the error.

message

A human-readable message describing the error that occurred.

HTTP Status Code: 400

Examples

Update an NFS file share's file mode

In the following request, you update the file mode for an NFS file share.

Sample Request

{
    "ClientToken": "xy23421",
    "NFSFileShareDefaults": {
        "FileMode": "0777",
        "DirectoryMode": "0777",
        "GroupId": "500",
        "OwnerId": "500"
    },
    "GatewayARN": "arn:aws:storagegateway:us-east-2:111122223333:gateway/sgw-XXXXXXX",
    "GuessMIMETypeEnabled": "true",
    "KMSEncrypted": "false",
    "Role": "arn:aws:iam::111122223333:role/my-role",
    "ObjectACL": "bucket-owner-full-control",
    "ReadOnly": "false",
    "RequesterPays": "false",
    "LocationARN": "arn:aws:s3:::amzn-s3-demo-bucket",
    "DefaultStorageClass": "S3_INTELLIGENT_TIERING",
    "Squash": "RootSquash"
}

Sample Response

{
    "FileShareARN": "arn:aws:storagegateway:us-east-2:111122223333:share/share-XXXXXXX"
}

Update an NFS file share with file upload notification turned on

In the following request, you update an NFS file share with file upload notification turned on and settling time set to 60 seconds.

Sample Request

{
    "ClientToken": "xy23421",
    "NFSFileShareDefaults": {
        "FileMode": "0777",
        "DirectoryMode": "0777",
        "GroupId": "500",
        "OwnerId": "500"
    },
    "GatewayARN": "arn:aws:storagegateway:us-east-2:111122223333:gateway/sgw-XXXXXXX",
    "GuessMIMETypeEnabled": "true",
    "KMSEncrypted": "false",
    "Role": "arn:aws:iam::111122223333:role/my-role",
    "ObjectACL": "bucket-owner-full-control",
    "ReadOnly": "false",
    "RequesterPays": "false",
    "LocationARN": "arn:aws:s3:::amzn-s3-demo-bucket",
    "DefaultStorageClass": "S3_INTELLIGENT_TIERING",
    "Squash": "RootSquash",
    "NotificationPolicy": "{\"Upload\": {\"SettlingTimeInSeconds\": 60}}"
}

Sample Response

{
    "FileShareARN": "arn:aws:storagegateway:us-east-2:111122223333:share/share-YYYYYYY"
}

Update an NFS file share with file upload notification turned off

In the following request, you update an NFS file share with file upload notification turned off.

Sample Request

{
    "ClientToken": "xy23421",
    "NFSFileShareDefaults": {
        "FileMode": "0777",
        "DirectoryMode": "0777",
        "GroupId": "500",
        "OwnerId": "500"
    },
    "GatewayARN": "arn:aws:storagegateway:us-east-2:111122223333:gateway/sgw-XXXXXXX",
    "GuessMIMETypeEnabled": "true",
    "KMSEncrypted": "false",
    "Role": "arn:aws:iam::111122223333:role/my-role",
    "ObjectACL": "bucket-owner-full-control",
    "ReadOnly": "false",
    "RequesterPays": "false",
    "LocationARN": "arn:aws:s3:::amzn-s3-demo-bucket",
    "DefaultStorageClass": "S3_INTELLIGENT_TIERING",
    "Squash": "RootSquash",
    "NotificationPolicy": "{}"
}

Sample Response

{
    "FileShareARN": "arn:aws:storagegateway:us-east-2:111122223333:share/share-YYYYYYY"
}

See Also

For more information about using this API in one of the language-specific AWS SDKs, see the following: