Skip to content

/AWS1/IF_R53=>UPDATEHEALTHCHECK()

About UpdateHealthCheck

Updates an existing health check. Note that some values can't be updated.

For more information about updating health checks, see Creating, Updating, and Deleting Health Checks in the Amazon Route 53 Developer Guide.

Method Signature

METHODS /AWS1/IF_R53~UPDATEHEALTHCHECK
  IMPORTING
    !IV_HEALTHCHECKID TYPE /AWS1/R53HEALTHCHECKID OPTIONAL
    !IV_HEALTHCHECKVERSION TYPE /AWS1/R53HEALTHCHECKVERSION OPTIONAL
    !IV_IPADDRESS TYPE /AWS1/R53IPADDRESS OPTIONAL
    !IV_PORT TYPE /AWS1/R53PORT OPTIONAL
    !IV_RESOURCEPATH TYPE /AWS1/R53RESOURCEPATH OPTIONAL
    !IV_FULLYQUALIFIEDDOMAINNAME TYPE /AWS1/R53FULLYQUALIFIEDDOMNAME OPTIONAL
    !IV_SEARCHSTRING TYPE /AWS1/R53SEARCHSTRING OPTIONAL
    !IV_FAILURETHRESHOLD TYPE /AWS1/R53FAILURETHRESHOLD OPTIONAL
    !IV_INVERTED TYPE /AWS1/R53INVERTED OPTIONAL
    !IV_DISABLED TYPE /AWS1/R53DISABLED OPTIONAL
    !IV_HEALTHTHRESHOLD TYPE /AWS1/R53HEALTHTHRESHOLD OPTIONAL
    !IT_CHILDHEALTHCHECKS TYPE /AWS1/CL_R53CHILDHEALTHCHECK00=>TT_CHILDHEALTHCHECKLIST OPTIONAL
    !IV_ENABLESNI TYPE /AWS1/R53ENABLESNI OPTIONAL
    !IT_REGIONS TYPE /AWS1/CL_R53HEALTHCHECKREGIO00=>TT_HEALTHCHECKREGIONLIST OPTIONAL
    !IO_ALARMIDENTIFIER TYPE REF TO /AWS1/CL_R53ALARMIDENTIFIER OPTIONAL
    !IV_INSUFFICIENTDATAHEALTHS00 TYPE /AWS1/R53INSUFFICIENTDATAHEA00 OPTIONAL
    !IT_RESETELEMENTS TYPE /AWS1/CL_R53RESETTBLELEMENTN00=>TT_RESETTABLEELEMENTNAMELIST OPTIONAL
  RETURNING
    VALUE(OO_OUTPUT) TYPE REF TO /aws1/cl_r53updhealthcheckrsp
  RAISING
    /AWS1/CX_R53HEALTHCHECKVRSMI00
    /AWS1/CX_R53INVALIDINPUT
    /AWS1/CX_R53NOSUCHHEALTHCHECK
    /AWS1/CX_R53CLIENTEXC
    /AWS1/CX_R53SERVEREXC
    /AWS1/CX_RT_TECHNICAL_GENERIC
    /AWS1/CX_RT_SERVICE_GENERIC.

IMPORTING

Required arguments:

iv_healthcheckid TYPE /AWS1/R53HEALTHCHECKID /AWS1/R53HEALTHCHECKID

The ID for the health check for which you want detailed information. When you created the health check, CreateHealthCheck returned the ID in the response, in the HealthCheckId element.

Optional arguments:

iv_healthcheckversion TYPE /AWS1/R53HEALTHCHECKVERSION /AWS1/R53HEALTHCHECKVERSION

A sequential counter that Amazon Route 53 sets to 1 when you create a health check and increments by 1 each time you update settings for the health check.

We recommend that you use GetHealthCheck or ListHealthChecks to get the current value of HealthCheckVersion for the health check that you want to update, and that you include that value in your UpdateHealthCheck request. This prevents Route 53 from overwriting an intervening update:

  • If the value in the UpdateHealthCheck request matches the value of HealthCheckVersion in the health check, Route 53 updates the health check with the new settings.

  • If the value of HealthCheckVersion in the health check is greater, the health check was changed after you got the version number. Route 53 does not update the health check, and it returns a HealthCheckVersionMismatch error.

iv_ipaddress TYPE /AWS1/R53IPADDRESS /AWS1/R53IPADDRESS

The IPv4 or IPv6 IP address for the endpoint that you want Amazon Route 53 to perform health checks on. If you don't specify a value for IPAddress, Route 53 sends a DNS request to resolve the domain name that you specify in FullyQualifiedDomainName at the interval that you specify in RequestInterval. Using an IP address that is returned by DNS, Route 53 then checks the health of the endpoint.

Use one of the following formats for the value of IPAddress:

  • IPv4 address: four values between 0 and 255, separated by periods (.), for example, 192.0.2.44.

  • IPv6 address: eight groups of four hexadecimal values, separated by colons (:), for example, 2001:0db8:85a3:0000:0000:abcd:0001:2345. You can also shorten IPv6 addresses as described in RFC 5952, for example, 2001:db8:85a3::abcd:1:2345.

If the endpoint is an EC2 instance, we recommend that you create an Elastic IP address, associate it with your EC2 instance, and specify the Elastic IP address for IPAddress. This ensures that the IP address of your instance never changes. For more information, see the applicable documentation:

If a health check already has a value for IPAddress, you can change the value. However, you can't update an existing health check to add or remove the value of IPAddress.

For more information, see FullyQualifiedDomainName.

Constraints: Route 53 can't check the health of endpoints for which the IP address is in local, private, non-routable, or multicast ranges. For more information about IP addresses for which you can't create health checks, see the following documents:

iv_port TYPE /AWS1/R53PORT /AWS1/R53PORT

The port on the endpoint that you want Amazon Route 53 to perform health checks on.

Don't specify a value for Port when you specify a value for Type of CLOUDWATCH_METRIC or CALCULATED.

iv_resourcepath TYPE /AWS1/R53RESOURCEPATH /AWS1/R53RESOURCEPATH

The path that you want Amazon Route 53 to request when performing health checks. The path can be any value for which your endpoint will return an HTTP status code of 2xx or 3xx when the endpoint is healthy, for example the file /docs/route53-health-check.html. You can also include query string parameters, for example, /welcome.html?language=jp&login=y.

Specify this value only if you want to change it.

iv_fullyqualifieddomainname TYPE /AWS1/R53FULLYQUALIFIEDDOMNAME /AWS1/R53FULLYQUALIFIEDDOMNAME

Amazon Route 53 behavior depends on whether you specify a value for IPAddress.

If a health check already has a value for IPAddress, you can change the value. However, you can't update an existing health check to add or remove the value of IPAddress.

If you specify a value for IPAddress:

Route 53 sends health check requests to the specified IPv4 or IPv6 address and passes the value of FullyQualifiedDomainName in the Host header for all health checks except TCP health checks. This is typically the fully qualified DNS name of the endpoint on which you want Route 53 to perform health checks.

When Route 53 checks the health of an endpoint, here is how it constructs the Host header:

  • If you specify a value of 80 for Port and HTTP or HTTP_STR_MATCH for Type, Route 53 passes the value of FullyQualifiedDomainName to the endpoint in the Host header.

  • If you specify a value of 443 for Port and HTTPS or HTTPS_STR_MATCH for Type, Route 53 passes the value of FullyQualifiedDomainName to the endpoint in the Host header.

  • If you specify another value for Port and any value except TCP for Type, Route 53 passes FullyQualifiedDomainName:Port to the endpoint in the Host header.

If you don't specify a value for FullyQualifiedDomainName, Route 53 substitutes the value of IPAddress in the Host header in each of the above cases.

If you don't specify a value for IPAddress:

If you don't specify a value for IPAddress, Route 53 sends a DNS request to the domain that you specify in FullyQualifiedDomainName at the interval you specify in RequestInterval. Using an IPv4 address that is returned by DNS, Route 53 then checks the health of the endpoint.

If you don't specify a value for IPAddress, you can’t update the health check to remove the FullyQualifiedDomainName; if you don’t specify a value for IPAddress on creation, a FullyQualifiedDomainName is required.

If you don't specify a value for IPAddress, Route 53 uses only IPv4 to send health checks to the endpoint. If there's no resource record set with a type of A for the name that you specify for FullyQualifiedDomainName, the health check fails with a "DNS resolution failed" error.

If you want to check the health of weighted, latency, or failover resource record sets and you choose to specify the endpoint only by FullyQualifiedDomainName, we recommend that you create a separate health check for each endpoint. For example, create a health check for each HTTP server that is serving content for www.example.com. For the value of FullyQualifiedDomainName, specify the domain name of the server (such as us-east-2-www.example.com), not the name of the resource record sets (www.example.com).

In this configuration, if the value of FullyQualifiedDomainName matches the name of the resource record sets and you then associate the health check with those resource record sets, health check results will be unpredictable.

In addition, if the value of Type is HTTP, HTTPS, HTTP_STR_MATCH, or HTTPS_STR_MATCH, Route 53 passes the value of FullyQualifiedDomainName in the Host header, as it does when you specify a value for IPAddress. If the value of Type is TCP, Route 53 doesn't pass a Host header.

iv_searchstring TYPE /AWS1/R53SEARCHSTRING /AWS1/R53SEARCHSTRING

If the value of Type is HTTP_STR_MATCH or HTTPS_STR_MATCH, the string that you want Amazon Route 53 to search for in the response body from the specified resource. If the string appears in the response body, Route 53 considers the resource healthy. (You can't change the value of Type when you update a health check.)

iv_failurethreshold TYPE /AWS1/R53FAILURETHRESHOLD /AWS1/R53FAILURETHRESHOLD

The number of consecutive health checks that an endpoint must pass or fail for Amazon Route 53 to change the current status of the endpoint from unhealthy to healthy or vice versa. For more information, see How Amazon Route 53 Determines Whether an Endpoint Is Healthy in the Amazon Route 53 Developer Guide.

If you don't specify a value for FailureThreshold, the default value is three health checks.

iv_inverted TYPE /AWS1/R53INVERTED /AWS1/R53INVERTED

Specify whether you want Amazon Route 53 to invert the status of a health check, for example, to consider a health check unhealthy when it otherwise would be considered healthy.

iv_disabled TYPE /AWS1/R53DISABLED /AWS1/R53DISABLED

Stops Route 53 from performing health checks. When you disable a health check, here's what happens:

  • Health checks that check the health of endpoints: Route 53 stops submitting requests to your application, server, or other resource.

  • Calculated health checks: Route 53 stops aggregating the status of the referenced health checks.

  • Health checks that monitor CloudWatch alarms: Route 53 stops monitoring the corresponding CloudWatch metrics.

After you disable a health check, Route 53 considers the status of the health check to always be healthy. If you configured DNS failover, Route 53 continues to route traffic to the corresponding resources. Additionally, in disabled state, you can also invert the status of the health check to route traffic differently. For more information, see Inverted.

Charges for a health check still apply when the health check is disabled. For more information, see Amazon Route 53 Pricing.

iv_healththreshold TYPE /AWS1/R53HEALTHTHRESHOLD /AWS1/R53HEALTHTHRESHOLD

The number of child health checks that are associated with a CALCULATED health that Amazon Route 53 must consider healthy for the CALCULATED health check to be considered healthy. To specify the child health checks that you want to associate with a CALCULATED health check, use the ChildHealthChecks and ChildHealthCheck elements.

Note the following:

  • If you specify a number greater than the number of child health checks, Route 53 always considers this health check to be unhealthy.

  • If you specify 0, Route 53 always considers this health check to be healthy.

it_childhealthchecks TYPE /AWS1/CL_R53CHILDHEALTHCHECK00=>TT_CHILDHEALTHCHECKLIST TT_CHILDHEALTHCHECKLIST

A complex type that contains one ChildHealthCheck element for each health check that you want to associate with a CALCULATED health check.

iv_enablesni TYPE /AWS1/R53ENABLESNI /AWS1/R53ENABLESNI

Specify whether you want Amazon Route 53 to send the value of FullyQualifiedDomainName to the endpoint in the client_hello message during TLS negotiation. This allows the endpoint to respond to HTTPS health check requests with the applicable SSL/TLS certificate.

Some endpoints require that HTTPS requests include the host name in the client_hello message. If you don't enable SNI, the status of the health check will be SSL alert handshake_failure. A health check can also have that status for other reasons. If SNI is enabled and you're still getting the error, check the SSL/TLS configuration on your endpoint and confirm that your certificate is valid.

The SSL/TLS certificate on your endpoint includes a domain name in the Common Name field and possibly several more in the Subject Alternative Names field. One of the domain names in the certificate should match the value that you specify for FullyQualifiedDomainName. If the endpoint responds to the client_hello message with a certificate that does not include the domain name that you specified in FullyQualifiedDomainName, a health checker will retry the handshake. In the second attempt, the health checker will omit FullyQualifiedDomainName from the client_hello message.

it_regions TYPE /AWS1/CL_R53HEALTHCHECKREGIO00=>TT_HEALTHCHECKREGIONLIST TT_HEALTHCHECKREGIONLIST

A complex type that contains one Region element for each region that you want Amazon Route 53 health checkers to check the specified endpoint from.

io_alarmidentifier TYPE REF TO /AWS1/CL_R53ALARMIDENTIFIER /AWS1/CL_R53ALARMIDENTIFIER

A complex type that identifies the CloudWatch alarm that you want Amazon Route 53 health checkers to use to determine whether the specified health check is healthy.

iv_insufficientdatahealths00 TYPE /AWS1/R53INSUFFICIENTDATAHEA00 /AWS1/R53INSUFFICIENTDATAHEA00

When CloudWatch has insufficient data about the metric to determine the alarm state, the status that you want Amazon Route 53 to assign to the health check:

  • Healthy: Route 53 considers the health check to be healthy.

  • Unhealthy: Route 53 considers the health check to be unhealthy.

  • LastKnownStatus: By default, Route 53 uses the status of the health check from the last time CloudWatch had sufficient data to determine the alarm state. For new health checks that have no last known status, the status for the health check is healthy.

it_resetelements TYPE /AWS1/CL_R53RESETTBLELEMENTN00=>TT_RESETTABLEELEMENTNAMELIST TT_RESETTABLEELEMENTNAMELIST

A complex type that contains one ResettableElementName element for each element that you want to reset to the default value. Valid values for ResettableElementName include the following:

RETURNING

oo_output TYPE REF TO /aws1/cl_r53updhealthcheckrsp /AWS1/CL_R53UPDHEALTHCHECKRSP

Domain /AWS1/RT_ACCOUNT_ID
Primitive Type NUMC

Examples

Syntax Example

This is an example of the syntax for calling the method. It includes every possible argument and initializes every possible value. The data provided is not necessarily semantically accurate (for example the value "string" may be provided for something that is intended to be an instance ID, or in some cases two arguments may be mutually exclusive). The syntax shows the ABAP syntax for creating the various data structures.

DATA(lo_result) = lo_client->updatehealthcheck(
  io_alarmidentifier = new /aws1/cl_r53alarmidentifier(
    iv_name = |string|
    iv_region = |string|
  )
  it_childhealthchecks = VALUE /aws1/cl_r53childhealthcheck00=>tt_childhealthchecklist(
    ( new /aws1/cl_r53childhealthcheck00( |string| ) )
  )
  it_regions = VALUE /aws1/cl_r53healthcheckregio00=>tt_healthcheckregionlist(
    ( new /aws1/cl_r53healthcheckregio00( |string| ) )
  )
  it_resetelements = VALUE /aws1/cl_r53resettblelementn00=>tt_resettableelementnamelist(
    ( new /aws1/cl_r53resettblelementn00( |string| ) )
  )
  iv_disabled = ABAP_TRUE
  iv_enablesni = ABAP_TRUE
  iv_failurethreshold = 123
  iv_fullyqualifieddomainname = |string|
  iv_healthcheckid = |string|
  iv_healthcheckversion = 123
  iv_healththreshold = 123
  iv_insufficientdatahealths00 = |string|
  iv_inverted = ABAP_TRUE
  iv_ipaddress = |string|
  iv_port = 123
  iv_resourcepath = |string|
  iv_searchstring = |string|
).

This is an example of reading all possible response values

lo_result = lo_result.
IF lo_result IS NOT INITIAL.
  lo_healthcheck = lo_result->get_healthcheck( ).
  IF lo_healthcheck IS NOT INITIAL.
    lv_healthcheckid = lo_healthcheck->get_id( ).
    lv_healthchecknonce = lo_healthcheck->get_callerreference( ).
    lo_linkedservice = lo_healthcheck->get_linkedservice( ).
    IF lo_linkedservice IS NOT INITIAL.
      lv_serviceprincipal = lo_linkedservice->get_serviceprincipal( ).
      lv_resourcedescription = lo_linkedservice->get_description( ).
    ENDIF.
    lo_healthcheckconfig = lo_healthcheck->get_healthcheckconfig( ).
    IF lo_healthcheckconfig IS NOT INITIAL.
      lv_ipaddress = lo_healthcheckconfig->get_ipaddress( ).
      lv_port = lo_healthcheckconfig->get_port( ).
      lv_healthchecktype = lo_healthcheckconfig->get_type( ).
      lv_resourcepath = lo_healthcheckconfig->get_resourcepath( ).
      lv_fullyqualifieddomainnam = lo_healthcheckconfig->get_fullyqualifieddomainname( ).
      lv_searchstring = lo_healthcheckconfig->get_searchstring( ).
      lv_requestinterval = lo_healthcheckconfig->get_requestinterval( ).
      lv_failurethreshold = lo_healthcheckconfig->get_failurethreshold( ).
      lv_measurelatency = lo_healthcheckconfig->get_measurelatency( ).
      lv_inverted = lo_healthcheckconfig->get_inverted( ).
      lv_disabled = lo_healthcheckconfig->get_disabled( ).
      lv_healththreshold = lo_healthcheckconfig->get_healththreshold( ).
      LOOP AT lo_healthcheckconfig->get_childhealthchecks( ) into lo_row.
        lo_row_1 = lo_row.
        IF lo_row_1 IS NOT INITIAL.
          lv_healthcheckid = lo_row_1->get_value( ).
        ENDIF.
      ENDLOOP.
      lv_enablesni = lo_healthcheckconfig->get_enablesni( ).
      LOOP AT lo_healthcheckconfig->get_regions( ) into lo_row_2.
        lo_row_3 = lo_row_2.
        IF lo_row_3 IS NOT INITIAL.
          lv_healthcheckregion = lo_row_3->get_value( ).
        ENDIF.
      ENDLOOP.
      lo_alarmidentifier = lo_healthcheckconfig->get_alarmidentifier( ).
      IF lo_alarmidentifier IS NOT INITIAL.
        lv_cloudwatchregion = lo_alarmidentifier->get_region( ).
        lv_alarmname = lo_alarmidentifier->get_name( ).
      ENDIF.
      lv_insufficientdatahealths = lo_healthcheckconfig->get_insufficientdatahealth00( ).
      lv_routingcontrolarn = lo_healthcheckconfig->get_routingcontrolarn( ).
    ENDIF.
    lv_healthcheckversion = lo_healthcheck->get_healthcheckversion( ).
    lo_cloudwatchalarmconfigur = lo_healthcheck->get_cloudwatchalarmconf( ).
    IF lo_cloudwatchalarmconfigur IS NOT INITIAL.
      lv_evaluationperiods = lo_cloudwatchalarmconfigur->get_evaluationperiods( ).
      lv_threshold = lo_cloudwatchalarmconfigur->get_threshold( ).
      lv_comparisonoperator = lo_cloudwatchalarmconfigur->get_comparisonoperator( ).
      lv_period = lo_cloudwatchalarmconfigur->get_period( ).
      lv_metricname = lo_cloudwatchalarmconfigur->get_metricname( ).
      lv_namespace = lo_cloudwatchalarmconfigur->get_namespace( ).
      lv_statistic = lo_cloudwatchalarmconfigur->get_statistic( ).
      LOOP AT lo_cloudwatchalarmconfigur->get_dimensions( ) into lo_row_4.
        lo_row_5 = lo_row_4.
        IF lo_row_5 IS NOT INITIAL.
          lv_dimensionfield = lo_row_5->get_name( ).
          lv_dimensionfield = lo_row_5->get_value( ).
        ENDIF.
      ENDLOOP.
    ENDIF.
  ENDIF.
ENDIF.