/AWS1/IF_ECA=>MODIFYCACHECLUSTER()

About ModifyCacheCluster

Modifies the settings for a cluster. You can use this operation to change one or more cluster configuration parameters by specifying the parameters and the new values.

Method Signature

METHODS /AWS1/IF_ECA~MODIFYCACHECLUSTER
  IMPORTING
    !IV_CACHECLUSTERID TYPE /AWS1/ECASTRING OPTIONAL
    !IV_NUMCACHENODES TYPE /AWS1/ECAINTEGEROPTIONAL OPTIONAL
    !IT_CACHENODEIDSTOREMOVE TYPE /AWS1/CL_ECACACHENODEIDSLIST_W=>TT_CACHENODEIDSLIST OPTIONAL
    !IV_AZMODE TYPE /AWS1/ECAAZMODE OPTIONAL
    !IT_NEWAVAILABILITYZONES TYPE /AWS1/CL_ECAPREFERREDAZLIST_W=>TT_PREFERREDAZLIST OPTIONAL
    !IT_CACHESECURITYGROUPNAMES TYPE /AWS1/CL_ECACACHESECGRNAMELS00=>TT_CACHESECURITYGROUPNAMELIST OPTIONAL
    !IT_SECURITYGROUPIDS TYPE /AWS1/CL_ECASECGROUPIDSLIST_W=>TT_SECURITYGROUPIDSLIST OPTIONAL
    !IV_PREFERREDMAINTENANCEWIN00 TYPE /AWS1/ECASTRING OPTIONAL
    !IV_NOTIFICATIONTOPICARN TYPE /AWS1/ECASTRING OPTIONAL
    !IV_CACHEPARAMETERGROUPNAME TYPE /AWS1/ECASTRING OPTIONAL
    !IV_NOTIFICATIONTOPICSTATUS TYPE /AWS1/ECASTRING OPTIONAL
    !IV_APPLYIMMEDIATELY TYPE /AWS1/ECABOOLEAN OPTIONAL
    !IV_ENGINE TYPE /AWS1/ECASTRING OPTIONAL
    !IV_ENGINEVERSION TYPE /AWS1/ECASTRING OPTIONAL
    !IV_AUTOMINORVERSIONUPGRADE TYPE /AWS1/ECABOOLEANOPTIONAL OPTIONAL
    !IV_SNAPSHOTRETENTIONLIMIT TYPE /AWS1/ECAINTEGEROPTIONAL OPTIONAL
    !IV_SNAPSHOTWINDOW TYPE /AWS1/ECASTRING OPTIONAL
    !IV_CACHENODETYPE TYPE /AWS1/ECASTRING OPTIONAL
    !IV_AUTHTOKEN TYPE /AWS1/ECASTRING OPTIONAL
    !IV_AUTHTOKENUPDATESTRATEGY TYPE /AWS1/ECAAUTHTOKENUPDSTRAGTYPE OPTIONAL
    !IT_LOGDELIVERYCONFIGURATIONS TYPE /AWS1/CL_ECALOGDELIVERYCONFREQ=>TT_LOGDELIVERYCONFREQUESTLIST OPTIONAL
    !IV_IPDISCOVERY TYPE /AWS1/ECAIPDISCOVERY OPTIONAL
    !IO_SCALECONFIG TYPE REF TO /AWS1/CL_ECASCALECONFIG OPTIONAL
  RETURNING
    VALUE(OO_OUTPUT) TYPE REF TO /aws1/cl_ecamdfycacheclustrslt
  RAISING
    /AWS1/CX_ECACACHECLSTNOTFNDF00
    /AWS1/CX_ECACACHEPRMGRNOTFND00
    /AWS1/CX_ECACACHESECGRNOTFND00
    /AWS1/CX_ECAINSUFFICIENTCACH00
    /AWS1/CX_ECAINVCACHECLSTSTAT00
    /AWS1/CX_ECAINVCACHESECGRSTA00
    /AWS1/CX_ECAINVPRMCOMBINATIO00
    /AWS1/CX_ECAINVPARAMVALUEEX
    /AWS1/CX_ECAINVVPCNETWORKSTA00
    /AWS1/CX_ECANODEQUOTAFORCLST00
    /AWS1/CX_ECANODEQUOTAFORCUSE00
    /AWS1/CX_ECACLIENTEXC
    /AWS1/CX_ECASERVEREXC
    /AWS1/CX_RT_TECHNICAL_GENERIC
    /AWS1/CX_RT_SERVICE_GENERIC.

IMPORTING

Required arguments:

iv_cacheclusterid TYPE /AWS1/ECASTRING /AWS1/ECASTRING

The cluster identifier. This value is stored as a lowercase string.

Optional arguments:

iv_numcachenodes TYPE /AWS1/ECAINTEGEROPTIONAL /AWS1/ECAINTEGEROPTIONAL

The number of cache nodes that the cluster should have. If the value for NumCacheNodes is greater than the sum of the number of current cache nodes and the number of cache nodes pending creation (which may be zero), more nodes are added. If the value is less than the number of existing cache nodes, nodes are removed. If the value is equal to the number of current cache nodes, any pending add or remove requests are canceled.

If you are removing cache nodes, you must use the CacheNodeIdsToRemove parameter to provide the IDs of the specific cache nodes to remove.

For clusters running Valkey or Redis OSS, this value must be 1. For clusters running Memcached, this value must be between 1 and 40.

Adding or removing Memcached cache nodes can be applied immediately or as a pending operation (see ApplyImmediately).

A pending operation to modify the number of cache nodes in a cluster during its maintenance window, whether by adding or removing nodes in accordance with the scale out architecture, is not queued. The customer's latest request to add or remove nodes to the cluster overrides any previous pending operations to modify the number of cache nodes in the cluster. For example, a request to remove 2 nodes would override a previous pending operation to remove 3 nodes. Similarly, a request to add 2 nodes would override a previous pending operation to remove 3 nodes and vice versa. As Memcached cache nodes may now be provisioned in different Availability Zones with flexible cache node placement, a request to add nodes does not automatically override a previous pending operation to add nodes. The customer can modify the previous pending operation to add more nodes or explicitly cancel the pending request and retry the new request. To cancel pending operations to modify the number of cache nodes in a cluster, use the ModifyCacheCluster request and set NumCacheNodes equal to the number of cache nodes currently in the cluster.

it_cachenodeidstoremove TYPE /AWS1/CL_ECACACHENODEIDSLIST_W=>TT_CACHENODEIDSLIST TT_CACHENODEIDSLIST

A list of cache node IDs to be removed. A node ID is a numeric identifier (0001, 0002, etc.). This parameter is only valid when NumCacheNodes is less than the existing number of cache nodes. The number of cache node IDs supplied in this parameter must match the difference between the existing number of cache nodes in the cluster or pending cache nodes, whichever is greater, and the value of NumCacheNodes in the request.

For example: If you have 3 active cache nodes, 7 pending cache nodes, and the number of cache nodes in this ModifyCacheCluster call is 5, you must list 2 (7 - 5) cache node IDs to remove.

iv_azmode TYPE /AWS1/ECAAZMODE /AWS1/ECAAZMODE

Specifies whether the new nodes in this Memcached cluster are all created in a single Availability Zone or created across multiple Availability Zones.

Valid values: single-az | cross-az.

This option is only supported for Memcached clusters.

You cannot specify single-az if the Memcached cluster already has cache nodes in different Availability Zones. If cross-az is specified, existing Memcached nodes remain in their current Availability Zone.

Only newly created nodes are located in different Availability Zones.

it_newavailabilityzones TYPE /AWS1/CL_ECAPREFERREDAZLIST_W=>TT_PREFERREDAZLIST TT_PREFERREDAZLIST

This option is only supported on Memcached clusters.

The list of Availability Zones where the new Memcached cache nodes are created.

This parameter is only valid when NumCacheNodes in the request is greater than the sum of the number of active cache nodes and the number of cache nodes pending creation (which may be zero). The number of Availability Zones supplied in this list must match the cache nodes being added in this request.

Scenarios:

• Scenario 1: You have 3 active nodes and wish to add 2 nodes. Specify NumCacheNodes=5 (3 + 2) and optionally specify two Availability Zones for the two new nodes.

• Scenario 2: You have 3 active nodes and 2 nodes pending creation (from the scenario 1 call) and want to add 1 more node. Specify NumCacheNodes=6 ((3 + 2) + 1) and optionally specify an Availability Zone for the new node.

• Scenario 3: You want to cancel all pending operations. Specify NumCacheNodes=3 to cancel all pending operations.

The Availability Zone placement of nodes pending creation cannot be modified. If you wish to cancel any nodes pending creation, add 0 nodes by setting NumCacheNodes to the number of current nodes.

If cross-az is specified, existing Memcached nodes remain in their current Availability Zone. Only newly created nodes can be located in different Availability Zones. For guidance on how to move existing Memcached nodes to different Availability Zones, see the Availability Zone Considerations section of Cache Node Considerations for Memcached.

Impact of new add/remove requests upon pending requests

• Scenario-1

  • Pending Action: Delete

  • New Request: Delete

  • Result: The new delete, pending or immediate, replaces the pending delete.

• Scenario-2

  • Pending Action: Delete

  • New Request: Create

  • Result: The new create, pending or immediate, replaces the pending delete.

• Scenario-3

  • Pending Action: Create

  • New Request: Delete

  • Result: The new delete, pending or immediate, replaces the pending create.

• Scenario-4

  • Pending Action: Create

  • New Request: Create

  • Result: The new create is added to the pending create.

    Important: If the new create request is Apply Immediately - Yes, all creates are performed immediately. If the new create request is Apply Immediately - No, all creates are pending.

it_cachesecuritygroupnames TYPE /AWS1/CL_ECACACHESECGRNAMELS00=>TT_CACHESECURITYGROUPNAMELIST TT_CACHESECURITYGROUPNAMELIST

A list of cache security group names to authorize on this cluster. This change is asynchronously applied as soon as possible.

You can use this parameter only with clusters that are created outside of an Amazon Virtual Private Cloud (Amazon VPC).

Constraints: Must contain no more than 255 alphanumeric characters. Must not be "Default".

it_securitygroupids TYPE /AWS1/CL_ECASECGROUPIDSLIST_W=>TT_SECURITYGROUPIDSLIST TT_SECURITYGROUPIDSLIST

Specifies the VPC Security Groups associated with the cluster.

This parameter can be used only with clusters that are created in an Amazon Virtual Private Cloud (Amazon VPC).

iv_preferredmaintenancewin00 TYPE /AWS1/ECASTRING /AWS1/ECASTRING

Specifies the weekly time range during which maintenance on the cluster is performed. It is specified as a range in the format ddd:hh24:mi-ddd:hh24:mi (24H Clock UTC). The minimum maintenance window is a 60 minute period.

Valid values for ddd are:

• sun

• mon

• tue

• wed

• thu

• fri

• sat

Example: sun:23:00-mon:01:30

iv_notificationtopicarn TYPE /AWS1/ECASTRING /AWS1/ECASTRING

The Amazon Resource Name (ARN) of the Amazon SNS topic to which notifications are sent.

The Amazon SNS topic owner must be same as the cluster owner.

iv_cacheparametergroupname TYPE /AWS1/ECASTRING /AWS1/ECASTRING

The name of the cache parameter group to apply to this cluster. This change is asynchronously applied as soon as possible for parameters when the ApplyImmediately parameter is specified as true for this request.

iv_notificationtopicstatus TYPE /AWS1/ECASTRING /AWS1/ECASTRING

The status of the Amazon SNS notification topic. Notifications are sent only if the status is active.

Valid values: active | inactive

iv_applyimmediately TYPE /AWS1/ECABOOLEAN /AWS1/ECABOOLEAN

If true, this parameter causes the modifications in this request and any pending modifications to be applied, asynchronously and as soon as possible, regardless of the PreferredMaintenanceWindow setting for the cluster.

If false, changes to the cluster are applied on the next maintenance reboot, or the next failure reboot, whichever occurs first.

If you perform a ModifyCacheCluster before a pending modification is applied, the pending modification is replaced by the newer modification.

Valid values: true | false

Default: false

iv_engine TYPE /AWS1/ECASTRING /AWS1/ECASTRING

The engine type used by the cache cluster. The options are valkey, memcached or redis.

iv_engineversion TYPE /AWS1/ECASTRING /AWS1/ECASTRING

The upgraded version of the cache engine to be run on the cache nodes.

Important: You can upgrade to a newer engine version (see Selecting a Cache Engine and Version), but you cannot downgrade to an earlier engine version. If you want to use an earlier engine version, you must delete the existing cluster and create it anew with the earlier engine version.

iv_autominorversionupgrade TYPE /AWS1/ECABOOLEANOPTIONAL /AWS1/ECABOOLEANOPTIONAL

 If you are running Valkey 7.2 or Redis OSS engine version 6.0 or later, set this parameter to yes to opt-in to the next auto minor version upgrade campaign. This parameter is disabled for previous versions. 

iv_snapshotretentionlimit TYPE /AWS1/ECAINTEGEROPTIONAL /AWS1/ECAINTEGEROPTIONAL

The number of days for which ElastiCache retains automatic cluster snapshots before deleting them. For example, if you set SnapshotRetentionLimit to 5, a snapshot that was taken today is retained for 5 days before being deleted.

If the value of SnapshotRetentionLimit is set to zero (0), backups are turned off.

iv_snapshotwindow TYPE /AWS1/ECASTRING /AWS1/ECASTRING

The daily time range (in UTC) during which ElastiCache begins taking a daily snapshot of your cluster.

iv_cachenodetype TYPE /AWS1/ECASTRING /AWS1/ECASTRING

A valid cache node type that you want to scale this cluster up to.

iv_authtoken TYPE /AWS1/ECASTRING /AWS1/ECASTRING

Reserved parameter. The password used to access a password protected server. This parameter must be specified with the auth-token-update parameter. Password constraints:

• Must be only printable ASCII characters

• Must be at least 16 characters and no more than 128 characters in length

• Cannot contain any of the following characters: '/', '"', or '@', '%'

For more information, see AUTH password at AUTH.

iv_authtokenupdatestrategy TYPE /AWS1/ECAAUTHTOKENUPDSTRAGTYPE /AWS1/ECAAUTHTOKENUPDSTRAGTYPE

Specifies the strategy to use to update the AUTH token. This parameter must be specified with the auth-token parameter. Possible values:

• ROTATE - default, if no update strategy is provided

• SET - allowed only after ROTATE

• DELETE - allowed only when transitioning to RBAC

For more information, see Authenticating Users with AUTH

it_logdeliveryconfigurations TYPE /AWS1/CL_ECALOGDELIVERYCONFREQ=>TT_LOGDELIVERYCONFREQUESTLIST TT_LOGDELIVERYCONFREQUESTLIST

Specifies the destination, format and type of the logs.

iv_ipdiscovery TYPE /AWS1/ECAIPDISCOVERY /AWS1/ECAIPDISCOVERY

The network type you choose when modifying a cluster, either ipv4 | ipv6. IPv6 is supported for workloads using Valkey 7.2 and above, Redis OSS engine version 6.2 to 7.1 or Memcached engine version 1.6.6 and above on all instances built on the Nitro system.

io_scaleconfig TYPE REF TO /AWS1/CL_ECASCALECONFIG /AWS1/CL_ECASCALECONFIG

Configures horizontal or vertical scaling for Memcached clusters, specifying the scaling percentage and interval.

RETURNING

oo_output TYPE REF TO /aws1/cl_ecamdfycacheclustrslt /AWS1/CL_ECAMDFYCACHECLUSTRSLT

Domain	/AWS1/RT_ACCOUNT_ID
Primitive Type	NUMC

Examples

Syntax Example

This is an example of the syntax for calling the method. It includes every possible argument and initializes every possible value. The data provided is not necessarily semantically accurate (for example the value "string" may be provided for something that is intended to be an instance ID, or in some cases two arguments may be mutually exclusive). The syntax shows the ABAP syntax for creating the various data structures.

DATA(lo_result) = lo_client->modifycachecluster(
  io_scaleconfig = new /aws1/cl_ecascaleconfig(
    iv_scaleintervalminutes = 123
    iv_scalepercentage = 123
  )
  it_cachenodeidstoremove = VALUE /aws1/cl_ecacachenodeidslist_w=>tt_cachenodeidslist(
    ( new /aws1/cl_ecacachenodeidslist_w( |string| ) )
  )
  it_cachesecuritygroupnames = VALUE /aws1/cl_ecacachesecgrnamels00=>tt_cachesecuritygroupnamelist(
    ( new /aws1/cl_ecacachesecgrnamels00( |string| ) )
  )
  it_logdeliveryconfigurations = VALUE /aws1/cl_ecalogdeliveryconfreq=>tt_logdeliveryconfrequestlist(
    (
      new /aws1/cl_ecalogdeliveryconfreq(
        io_destinationdetails = new /aws1/cl_ecadestinationdetails(
          io_cloudwatchlogsdetails = new /aws1/cl_ecacloudwatchlogsds00( |string| )
          io_kinesisfirehosedetails = new /aws1/cl_ecakinesisfirehosed00( |string| )
        )
        iv_destinationtype = |string|
        iv_enabled = ABAP_TRUE
        iv_logformat = |string|
        iv_logtype = |string|
      )
    )
  )
  it_newavailabilityzones = VALUE /aws1/cl_ecapreferredazlist_w=>tt_preferredazlist(
    ( new /aws1/cl_ecapreferredazlist_w( |string| ) )
  )
  it_securitygroupids = VALUE /aws1/cl_ecasecgroupidslist_w=>tt_securitygroupidslist(
    ( new /aws1/cl_ecasecgroupidslist_w( |string| ) )
  )
  iv_applyimmediately = ABAP_TRUE
  iv_authtoken = |string|
  iv_authtokenupdatestrategy = |string|
  iv_autominorversionupgrade = ABAP_TRUE
  iv_azmode = |string|
  iv_cacheclusterid = |string|
  iv_cachenodetype = |string|
  iv_cacheparametergroupname = |string|
  iv_engine = |string|
  iv_engineversion = |string|
  iv_ipdiscovery = |string|
  iv_notificationtopicarn = |string|
  iv_notificationtopicstatus = |string|
  iv_numcachenodes = 123
  iv_preferredmaintenancewin00 = |string|
  iv_snapshotretentionlimit = 123
  iv_snapshotwindow = |string|
).

This is an example of reading all possible response values

lo_result = lo_result.
IF lo_result IS NOT INITIAL.
  lo_cachecluster = lo_result->get_cachecluster( ).
  IF lo_cachecluster IS NOT INITIAL.
    lv_string = lo_cachecluster->get_cacheclusterid( ).
    lo_endpoint = lo_cachecluster->get_configurationendpoint( ).
    IF lo_endpoint IS NOT INITIAL.
      lv_string = lo_endpoint->get_address( ).
      lv_integer = lo_endpoint->get_port( ).
    ENDIF.
    lv_string = lo_cachecluster->get_clidownloadlandingpage( ).
    lv_string = lo_cachecluster->get_cachenodetype( ).
    lv_string = lo_cachecluster->get_engine( ).
    lv_string = lo_cachecluster->get_engineversion( ).
    lv_string = lo_cachecluster->get_cacheclusterstatus( ).
    lv_integeroptional = lo_cachecluster->get_numcachenodes( ).
    lv_string = lo_cachecluster->get_preferredaz( ).
    lv_string = lo_cachecluster->get_preferredoutpostarn( ).
    lv_tstamp = lo_cachecluster->get_cacheclustercreatetime( ).
    lv_string = lo_cachecluster->get_preferredmaintenancewi00( ).
    lo_pendingmodifiedvalues = lo_cachecluster->get_pendingmodifiedvalues( ).
    IF lo_pendingmodifiedvalues IS NOT INITIAL.
      lv_integeroptional = lo_pendingmodifiedvalues->get_numcachenodes( ).
      LOOP AT lo_pendingmodifiedvalues->get_cachenodeidstoremove( ) into lo_row.
        lo_row_1 = lo_row.
        IF lo_row_1 IS NOT INITIAL.
          lv_string = lo_row_1->get_value( ).
        ENDIF.
      ENDLOOP.
      lv_string = lo_pendingmodifiedvalues->get_engineversion( ).
      lv_string = lo_pendingmodifiedvalues->get_cachenodetype( ).
      lv_authtokenupdatestatus = lo_pendingmodifiedvalues->get_authtokenstatus( ).
      LOOP AT lo_pendingmodifiedvalues->get_logdeliveryconfs( ) into lo_row_2.
        lo_row_3 = lo_row_2.
        IF lo_row_3 IS NOT INITIAL.
          lv_logtype = lo_row_3->get_logtype( ).
          lv_destinationtype = lo_row_3->get_destinationtype( ).
          lo_destinationdetails = lo_row_3->get_destinationdetails( ).
          IF lo_destinationdetails IS NOT INITIAL.
            lo_cloudwatchlogsdestinati = lo_destinationdetails->get_cloudwatchlogsdetails( ).
            IF lo_cloudwatchlogsdestinati IS NOT INITIAL.
              lv_string = lo_cloudwatchlogsdestinati->get_loggroup( ).
            ENDIF.
            lo_kinesisfirehosedestinat = lo_destinationdetails->get_kinesisfirehosedetails( ).
            IF lo_kinesisfirehosedestinat IS NOT INITIAL.
              lv_string = lo_kinesisfirehosedestinat->get_deliverystream( ).
            ENDIF.
          ENDIF.
          lv_logformat = lo_row_3->get_logformat( ).
        ENDIF.
      ENDLOOP.
      lv_booleanoptional = lo_pendingmodifiedvalues->get_transitencryptionenabled( ).
      lv_transitencryptionmode = lo_pendingmodifiedvalues->get_transitencryptionmode( ).
      lo_scaleconfig = lo_pendingmodifiedvalues->get_scaleconfig( ).
      IF lo_scaleconfig IS NOT INITIAL.
        lv_integeroptional = lo_scaleconfig->get_scalepercentage( ).
        lv_integeroptional = lo_scaleconfig->get_scaleintervalminutes( ).
      ENDIF.
    ENDIF.
    lo_notificationconfigurati = lo_cachecluster->get_notificationconf( ).
    IF lo_notificationconfigurati IS NOT INITIAL.
      lv_string = lo_notificationconfigurati->get_topicarn( ).
      lv_string = lo_notificationconfigurati->get_topicstatus( ).
    ENDIF.
    LOOP AT lo_cachecluster->get_cachesecuritygroups( ) into lo_row_4.
      lo_row_5 = lo_row_4.
      IF lo_row_5 IS NOT INITIAL.
        lv_string = lo_row_5->get_cachesecuritygroupname( ).
        lv_string = lo_row_5->get_status( ).
      ENDIF.
    ENDLOOP.
    lo_cacheparametergroupstat = lo_cachecluster->get_cacheparametergroup( ).
    IF lo_cacheparametergroupstat IS NOT INITIAL.
      lv_string = lo_cacheparametergroupstat->get_cacheparametergroupname( ).
      lv_string = lo_cacheparametergroupstat->get_parameterapplystatus( ).
      LOOP AT lo_cacheparametergroupstat->get_cachenodeidstoreboot( ) into lo_row.
        lo_row_1 = lo_row.
        IF lo_row_1 IS NOT INITIAL.
          lv_string = lo_row_1->get_value( ).
        ENDIF.
      ENDLOOP.
    ENDIF.
    lv_string = lo_cachecluster->get_cachesubnetgroupname( ).
    LOOP AT lo_cachecluster->get_cachenodes( ) into lo_row_6.
      lo_row_7 = lo_row_6.
      IF lo_row_7 IS NOT INITIAL.
        lv_string = lo_row_7->get_cachenodeid( ).
        lv_string = lo_row_7->get_cachenodestatus( ).
        lv_tstamp = lo_row_7->get_cachenodecreatetime( ).
        lo_endpoint = lo_row_7->get_endpoint( ).
        IF lo_endpoint IS NOT INITIAL.
          lv_string = lo_endpoint->get_address( ).
          lv_integer = lo_endpoint->get_port( ).
        ENDIF.
        lv_string = lo_row_7->get_parametergroupstatus( ).
        lv_string = lo_row_7->get_sourcecachenodeid( ).
        lv_string = lo_row_7->get_customeravailabilityzone( ).
        lv_string = lo_row_7->get_customeroutpostarn( ).
      ENDIF.
    ENDLOOP.
    lv_boolean = lo_cachecluster->get_autominorversionupgrade( ).
    LOOP AT lo_cachecluster->get_securitygroups( ) into lo_row_8.
      lo_row_9 = lo_row_8.
      IF lo_row_9 IS NOT INITIAL.
        lv_string = lo_row_9->get_securitygroupid( ).
        lv_string = lo_row_9->get_status( ).
      ENDIF.
    ENDLOOP.
    lv_string = lo_cachecluster->get_replicationgroupid( ).
    lv_integeroptional = lo_cachecluster->get_snapshotretentionlimit( ).
    lv_string = lo_cachecluster->get_snapshotwindow( ).
    lv_booleanoptional = lo_cachecluster->get_authtokenenabled( ).
    lv_tstamp = lo_cachecluster->get_authtokenlastmoddeddate( ).
    lv_booleanoptional = lo_cachecluster->get_transitencryptionenabled( ).
    lv_booleanoptional = lo_cachecluster->get_atrestencryptionenabled( ).
    lv_string = lo_cachecluster->get_arn( ).
    lv_boolean = lo_cachecluster->get_replgrouplogdeliveryenbd( ).
    LOOP AT lo_cachecluster->get_logdeliveryconfs( ) into lo_row_10.
      lo_row_11 = lo_row_10.
      IF lo_row_11 IS NOT INITIAL.
        lv_logtype = lo_row_11->get_logtype( ).
        lv_destinationtype = lo_row_11->get_destinationtype( ).
        lo_destinationdetails = lo_row_11->get_destinationdetails( ).
        IF lo_destinationdetails IS NOT INITIAL.
          lo_cloudwatchlogsdestinati = lo_destinationdetails->get_cloudwatchlogsdetails( ).
          IF lo_cloudwatchlogsdestinati IS NOT INITIAL.
            lv_string = lo_cloudwatchlogsdestinati->get_loggroup( ).
          ENDIF.
          lo_kinesisfirehosedestinat = lo_destinationdetails->get_kinesisfirehosedetails( ).
          IF lo_kinesisfirehosedestinat IS NOT INITIAL.
            lv_string = lo_kinesisfirehosedestinat->get_deliverystream( ).
          ENDIF.
        ENDIF.
        lv_logformat = lo_row_11->get_logformat( ).
        lv_logdeliveryconfiguratio = lo_row_11->get_status( ).
        lv_string = lo_row_11->get_message( ).
      ENDIF.
    ENDLOOP.
    lv_networktype = lo_cachecluster->get_networktype( ).
    lv_ipdiscovery = lo_cachecluster->get_ipdiscovery( ).
    lv_transitencryptionmode = lo_cachecluster->get_transitencryptionmode( ).
  ENDIF.
ENDIF.

ModifyCacheCluster

Copies a snapshot to a specified name.

DATA(lo_result) = lo_client->modifycachecluster(
  iv_applyimmediately = ABAP_TRUE
  iv_cacheclusterid = |redis-cluster|
  iv_snapshotretentionlimit = 14
).