AWS Tools for Windows PowerShell
Command Reference

AWS services or capabilities described in AWS Documentation may vary by region/location. Click Getting Started with Amazon AWS to see specific differences applicable to the China (Beijing) Region.

Synopsis

Calls the Amazon Elastic Compute Cloud (EC2) ReplaceRoute API operation.

Syntax

Set-EC2Route
-RouteTableId <String>
-DestinationCidrBlock <String>
-GatewayId <String>
-InstanceId <String>
-NetworkInterfaceId <String>
-CarrierGatewayId <String>
-CoreNetworkArn <String>
-DestinationIpv6CidrBlock <String>
-DestinationPrefixListId <String>
-DryRun <Boolean>
-EgressOnlyInternetGatewayId <String>
-LocalGatewayId <String>
-LocalTarget <Boolean>
-NatGatewayId <String>
-OdbNetworkArn <String>
-TransitGatewayId <String>
-VpcEndpointId <String>
-VpcPeeringConnectionId <String>
-Select <String>
-Force <SwitchParameter>
-ClientConfig <AmazonEC2Config>

Description

Replaces an existing route within a route table in a VPC. You must specify either a destination CIDR block or a prefix list ID. You must also specify exactly one of the resources from the parameter list, or reset the local route to its default target. For more information, see Route tables in the Amazon VPC User Guide.

Parameters

-CarrierGatewayId <String>
[IPv4 traffic only] The ID of a carrier gateway.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-ClientConfig <AmazonEC2Config>
Amazon.PowerShell.Cmdlets.EC2.AmazonEC2ClientCmdlet.ClientConfig
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-CoreNetworkArn <String>
The Amazon Resource Name (ARN) of the core network.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-DestinationCidrBlock <String>
The IPv4 CIDR address block used for the destination match. The value that you provide must match the CIDR of an existing route in the table.
Required?False
Position?2
Accept pipeline input?True (ByPropertyName)
-DestinationIpv6CidrBlock <String>
The IPv6 CIDR address block used for the destination match. The value that you provide must match the CIDR of an existing route in the table.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-DestinationPrefixListId <String>
The ID of the prefix list for the route.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-DryRun <Boolean>
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-EgressOnlyInternetGatewayId <String>
[IPv6 traffic only] The ID of an egress-only internet gateway.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Force <SwitchParameter>
This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-GatewayId <String>
The ID of an internet gateway or virtual private gateway.
Required?False
Position?3
Accept pipeline input?True (ByPropertyName)
-InstanceId <String>
The ID of a NAT instance in your VPC.
Required?False
Position?4
Accept pipeline input?True (ByPropertyName)
-LocalGatewayId <String>
The ID of the local gateway.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-LocalTarget <Boolean>
Specifies whether to reset the local route to its default target (local).
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-NatGatewayId <String>
[IPv4 traffic only] The ID of a NAT gateway.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-NetworkInterfaceId <String>
The ID of a network interface.
Required?False
Position?5
Accept pipeline input?True (ByPropertyName)
-OdbNetworkArn <String>
The Amazon Resource Name (ARN) of the ODB network.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-RouteTableId <String>
The ID of the route table.
Required?True
Position?1
Accept pipeline input?True (ByValue, ByPropertyName)
-Select <String>
Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.EC2.Model.ReplaceRouteResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-TransitGatewayId <String>
The ID of a transit gateway.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-VpcEndpointId <String>
The ID of a VPC endpoint. Supported for Gateway Load Balancer endpoints only.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-VpcPeeringConnectionId <String>
The ID of a VPC peering connection.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)

Common Credential and Region Parameters

-AccessKey <String>
The AWS access key for the user account. This can be a temporary access key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAK
-Credential <AWSCredentials>
An AWSCredentials object instance containing access and secret key information, and optionally a token for session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-EndpointUrl <String>
The endpoint to make the call against.Note: This parameter is primarily for internal AWS use and is not required/should not be specified for normal usage. The cmdlets normally determine which endpoint to call based on the region specified to the -Region parameter or set as default in the shell (via Set-DefaultAWSRegion). Only specify this parameter if you must direct the call to a specific custom endpoint.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-NetworkCredential <PSCredential>
Used with SAML-based authentication when ProfileName references a SAML role profile. Contains the network credentials to be supplied during authentication with the configured identity provider's endpoint. This parameter is not required if the user's default network identity can or should be used during authentication.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-ProfileLocation <String>
Used to specify the name and location of the ini-format credential file (shared with the AWS CLI and other AWS SDKs)If this optional parameter is omitted this cmdlet will search the encrypted credential file used by the AWS SDK for .NET and AWS Toolkit for Visual Studio first. If the profile is not found then the cmdlet will search in the ini-format credential file at the default location: (user's home directory)\.aws\credentials.If this parameter is specified then this cmdlet will only search the ini-format credential file at the location given.As the current folder can vary in a shell or during script execution it is advised that you use specify a fully qualified path instead of a relative path.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAWSProfilesLocation, ProfilesLocation
-ProfileName <String>
The user-defined name of an AWS credentials or SAML-based role profile containing credential information. The profile is expected to be found in the secure credential file shared with the AWS SDK for .NET and AWS Toolkit for Visual Studio. You can also specify the name of a profile stored in the .ini-format credential file used with the AWS CLI and other AWS SDKs.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesStoredCredentials, AWSProfileName
-Region <Object>
The system name of an AWS region or an AWSRegion instance. This governs the endpoint that will be used when calling service operations. Note that the AWS resources referenced in a call are usually region-specific.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesRegionToCall
-SecretKey <String>
The AWS secret key for the user account. This can be a temporary secret key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesSK, SecretAccessKey
-SessionToken <String>
The session token if the access and secret keys are temporary session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesST

Outputs

None or Amazon.EC2.Model.ReplaceRouteResponse
This cmdlet does not generate any output.The service response (type Amazon.EC2.Model.ReplaceRouteResponse) be returned by specifying '-Select *'.

Examples

Example 1

Set-EC2Route -RouteTableId rtb-1a2b3c4d -DestinationCidrBlock 10.0.0.0/24 -GatewayId vgw-1a2b3c4d
This example replaces the specified route for the specified route table. The new route sends the specified traffic to the specified virtual private gateway.
User Guide
Service API Reference
Microsoft Windows Guide
VPC User Guide
AWS Tools for PowerShell User Guide

Supported Version

AWS Tools for PowerShell: 2.x.y.z