AWS Tools for Windows PowerShell
Command Reference

AWS services or capabilities described in AWS Documentation may vary by region/location. Click Getting Started with Amazon AWS to see specific differences applicable to the China (Beijing) Region.

Synopsis

Calls the Amazon Elastic Compute Cloud (EC2) CreateCustomerGateway API operation.

Syntax

New-EC2CustomerGateway
-Type <GatewayType>
-PublicIp <String>
-BgpAsn <Int32>
-BgpAsnExtended <Int64>
-CertificateArn <String>
-DeviceName <String>
-DryRun <Boolean>
-IpAddress <String>
-TagSpecification <TagSpecification[]>
-Select <String>
-Force <SwitchParameter>
-ClientConfig <AmazonEC2Config>

Description

Provides information to Amazon Web Services about your customer gateway device. The customer gateway device is the appliance at your end of the VPN connection. You must provide the IP address of the customer gateway device’s external interface. The IP address must be static and can be behind a device performing network address translation (NAT). For devices that use Border Gateway Protocol (BGP), you can also provide the device's BGP Autonomous System Number (ASN). You can use an existing ASN assigned to your network. If you don't have an ASN already, you can use a private ASN. For more information, see Customer gateway options for your Site-to-Site VPN connection in the Amazon Web Services Site-to-Site VPN User Guide. To create more than one customer gateway with the same VPN type, IP address, and BGP ASN, specify a unique device name for each customer gateway. An identical request returns information about the existing customer gateway; it doesn't create a new customer gateway.

Parameters

-BgpAsn <Int32>
For customer gateway devices that support BGP, specify the device's ASN. You must specify either BgpAsn or BgpAsnExtended when creating the customer gateway. If the ASN is larger than 2,147,483,647, you must use BgpAsnExtended.Default: 65000Valid values: 1 to 2,147,483,647
Required?False
Position?3
Accept pipeline input?True (ByPropertyName)
-BgpAsnExtended <Int64>
For customer gateway devices that support BGP, specify the device's ASN. You must specify either BgpAsn or BgpAsnExtended when creating the customer gateway. If the ASN is larger than 2,147,483,647, you must use BgpAsnExtended.Valid values: 2,147,483,648 to 4,294,967,295
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-CertificateArn <String>
The Amazon Resource Name (ARN) for the customer gateway certificate.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-ClientConfig <AmazonEC2Config>
Amazon.PowerShell.Cmdlets.EC2.AmazonEC2ClientCmdlet.ClientConfig
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-DeviceName <String>
A name for the customer gateway device.Length Constraints: Up to 255 characters.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-DryRun <Boolean>
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Force <SwitchParameter>
This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-IpAddress <String>
The IP address for the customer gateway device's outside interface. The address must be static. If OutsideIpAddressType in your VPN connection options is set to PrivateIpv4, you can use an RFC6598 or RFC1918 private IPv4 address. If OutsideIpAddressType is set to Ipv6, you can use an IPv6 address.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-PublicIp <String>
This member has been deprecated. The Internet-routable IP address for the customer gateway's outside interface. The address must be static.
Required?False
Position?2
Accept pipeline input?True (ByPropertyName)
-Select <String>
Use the -Select parameter to control the cmdlet output. The default value is 'CustomerGateway'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.EC2.Model.CreateCustomerGatewayResponse). Specifying the name of a property of type Amazon.EC2.Model.CreateCustomerGatewayResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-TagSpecification <TagSpecification[]>
The tags to apply to the customer gateway. Starting with version 4 of the SDK this property will default to null. If no data for this property is returned from the service the property will also be null. This was changed to improve performance and allow the SDK and caller to distinguish between a property not set or a property being empty to clear out a value. To retain the previous SDK behavior set the AWSConfigs.InitializeCollections static property to true.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesTagSpecifications
-Type <GatewayType>
The type of VPN connection that this customer gateway supports (ipsec.1).
Required?True
Position?1
Accept pipeline input?True (ByValue, ByPropertyName)

Common Credential and Region Parameters

-AccessKey <String>
The AWS access key for the user account. This can be a temporary access key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAK
-Credential <AWSCredentials>
An AWSCredentials object instance containing access and secret key information, and optionally a token for session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-EndpointUrl <String>
The endpoint to make the call against.Note: This parameter is primarily for internal AWS use and is not required/should not be specified for normal usage. The cmdlets normally determine which endpoint to call based on the region specified to the -Region parameter or set as default in the shell (via Set-DefaultAWSRegion). Only specify this parameter if you must direct the call to a specific custom endpoint.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-NetworkCredential <PSCredential>
Used with SAML-based authentication when ProfileName references a SAML role profile. Contains the network credentials to be supplied during authentication with the configured identity provider's endpoint. This parameter is not required if the user's default network identity can or should be used during authentication.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-ProfileLocation <String>
Used to specify the name and location of the ini-format credential file (shared with the AWS CLI and other AWS SDKs)If this optional parameter is omitted this cmdlet will search the encrypted credential file used by the AWS SDK for .NET and AWS Toolkit for Visual Studio first. If the profile is not found then the cmdlet will search in the ini-format credential file at the default location: (user's home directory)\.aws\credentials.If this parameter is specified then this cmdlet will only search the ini-format credential file at the location given.As the current folder can vary in a shell or during script execution it is advised that you use specify a fully qualified path instead of a relative path.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAWSProfilesLocation, ProfilesLocation
-ProfileName <String>
The user-defined name of an AWS credentials or SAML-based role profile containing credential information. The profile is expected to be found in the secure credential file shared with the AWS SDK for .NET and AWS Toolkit for Visual Studio. You can also specify the name of a profile stored in the .ini-format credential file used with the AWS CLI and other AWS SDKs.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesStoredCredentials, AWSProfileName
-Region <Object>
The system name of an AWS region or an AWSRegion instance. This governs the endpoint that will be used when calling service operations. Note that the AWS resources referenced in a call are usually region-specific.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesRegionToCall
-SecretKey <String>
The AWS secret key for the user account. This can be a temporary secret key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesSK, SecretAccessKey
-SessionToken <String>
The session token if the access and secret keys are temporary session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesST

Outputs

Amazon.EC2.Model.CustomerGateway or Amazon.EC2.Model.CreateCustomerGatewayResponse
This cmdlet returns an Amazon.EC2.Model.CustomerGateway object. The service call response (type Amazon.EC2.Model.CreateCustomerGatewayResponse) can be returned by specifying '-Select *'.

Examples

Example 1

New-EC2CustomerGateway -Type ipsec.1 -PublicIp 203.0.113.12 -BgpAsn 65534

BgpAsn            : 65534
CustomerGatewayId : cgw-1a2b3c4d
IpAddress         : 203.0.113.12
State             : available
Tags              : {}
Type              : ipsec.1
This example creates the specified customer gateway.
User Guide
Service API Reference
Microsoft Windows Guide
VPC User Guide
AWS Tools for PowerShell User Guide

Supported Version

AWS Tools for PowerShell: 2.x.y.z