マルチ属性キーパターン - Amazon DynamoDB

マルチ属性キーパターン

概要

マルチ属性キーを使用すると、それぞれ最大 4 つの属性で構成されるグローバルセカンダリインデックス (GSI) パーティションとソートキーを作成できます。これにより、クライアント側のコードが減り、最初にデータをモデル化し、後で新しいアクセスパターンを追加することが容易になります。

一般的なシナリオを考えてみましょう。複数の階層属性で項目をクエリする GSI を作成するには、従来、値を連結して合成キーを作成する必要があります。例えば、ゲームアプリでは、トーナメント、リージョン、ラウンドでトーナメントマッチをクエリするために、TOURNAMENT#WINTER2024#REGION#NA-EAST などの合成 GSI パーティションキーと ROUND#SEMIFINALS#BRACKET#UPPER などの合成ソートキーを作成できます。このアプローチは機能しますが、既存のテーブルに GSI を追加する場合は、データを書き込むときに文字列を連結し、読み取り時に解析し、既存のすべての項目にわたって合成キーをバックフィルする必要があります。これにより、コードが整理整頓され、個々のキーコンポーネントで型の安全性を維持することが困難になります。

マルチ属性キーは、GSI のこの問題を解決します。GSI パーティションキーは、tournamentId や region などの複数の既存の属性を使用して定義します。DynamoDB は複合キーロジックを自動的に処理し、データ分散のためにそれらをハッシュします。ドメインモデルから自然属性を使用して項目を記述すると、GSI は自動的にインデックスを作成します。連結なし、解析なし、バックフィルなし。コードはきれいに保たれ、データは入力され、クエリはシンプルになります。このアプローチは、自然属性のグループ化を含む階層データがある場合に特に役立ちます (トーナメント → リージョン → ラウンド、または組織 → 部門 → チームなど)。

アプリケーションの例

このガイドでは、e スポーツプラットフォームのトーナメントマッチ追跡システムを構築する方法について説明します。プラットフォームは、ブラケット管理のためのトーナメントとリージョン、マッチング履歴のための選手、スケジューリングのための日付など、複数のディメンションにわたって試合を効率的にクエリする必要があります。

データモデル

このチュートリアルでは、トーナメントマッチ追跡システムは 3 つの主要なアクセスパターンをサポートし、それぞれに異なるキー構造が必要です。

アクセスパターン 1: 一意の ID で特定の試合を検索する

  • 解決策: パーティションキーとして matchId をベーステーブルと使用する

アクセスパターン 2: 特定のトーナメントとリージョンのすべての試合をクエリし、オプションでラウンド、ブラケット、または試合でフィルタリングする

  • 解決策: マルチ属性パーティションキー (tournamentId + region) とマルチ属性ソートキー (round + bracket + matchId) を持つグローバルセカンダリインデックス

  • クエリの例: 「NA-EAST リージョン内の All WINTER2024 の試合」、または「WINTER2024/NA-EAST の UPPER ブラケット内の All SEMIFINALS の試合」

アクセスパターン 3: 選手の試合履歴をクエリし、オプションで日付範囲またはトーナメントラウンドでフィルタリングする

  • 解決策: 単一パーティションキー (player1Id) とマルチ属性ソートキー (matchDate + round) を持つグローバルセカンダリインデックス

  • クエリの例: 「プレイヤー 101 のすべての試合」または「2024 年 1 月の選手 101 の試合」

従来およびマルチ属性アプローチの主な違いは、項目構造を調べるときにはっきりします。

従来のグローバルセカンダリインデックスのアプローチ (連結キー):

// Manual concatenation required for GSI keys const item = { matchId: 'match-001', // Base table PK tournamentId: 'WINTER2024', region: 'NA-EAST', round: 'SEMIFINALS', bracket: 'UPPER', player1Id: '101', // Synthetic keys needed for GSI GSI_PK: `TOURNAMENT#${tournamentId}#REGION#${region}`, // Must concatenate GSI_SK: `${round}#${bracket}#${matchId}`, // Must concatenate // ... other attributes };

マルチ属性のグローバルセカンダリインデックスのアプローチ (ネイティブキー):

// Use existing attributes directly - no concatenation needed const item = { matchId: 'match-001', // Base table PK tournamentId: 'WINTER2024', region: 'NA-EAST', round: 'SEMIFINALS', bracket: 'UPPER', player1Id: '101', matchDate: '2024-01-18', // No synthetic keys needed - GSI uses existing attributes directly // ... other attributes };

マルチ属性キーでは、自然ドメイン属性を使用して項目を 1 回書き込みます。DynamoDB は、合成連結キーを必要とせずに、複数の GSI 間で自動的にインデックスを作成します。

ベーステーブルスキーマ:

  • パーティションキー: matchId (1 属性)

グローバルセカンダリインデックススキーマ (マルチ属性キーを持つ TournamentRegionIndex):

  • パーティションキー: tournamentIdregion (2 属性)

  • ソートキー: roundbracketmatchId (3 属性)

グローバルセカンダリインデックススキーマ (マルチ属性キーを持つ PlayerMatchHistoryIndex):

  • パーティションキー: player1Id (1 属性)

  • ソートキー: matchDateround (2 属性)

ベーステーブル: TournamentMatches

matchId (PK) tournamentId リージョン round ブラケット player1Id player2Id matchDate 勝者 score
match-001 WINTER2024 NA-EAST FINALS CHAMPIONSHIP 101 103 2024-01-20 101 3-1
match-002 WINTER2024 NA-EAST SEMIFINALS UPPER 101 105 2024-01-18 101 3-2
match-003 WINTER2024 NA-EAST SEMIFINALS UPPER 103 107 2024-01-18 103 3-0
match-004 WINTER2024 NA-EAST QUARTERFINALS UPPER 101 109 2024-01-15 101 3-1
match-005 WINTER2024 NA-WEST FINALS CHAMPIONSHIP 102 104 2024-01-20 102 3-2
match-006 WINTER2024 NA-WEST SEMIFINALS UPPER 102 106 2024-01-18 102 3-1
match-007 SPRING2024 NA-EAST QUARTERFINALS UPPER 101 108 2024-03-15 101 3-0
match-008 SPRING2024 NA-EAST QUARTERFINALS LOWER 103 110 2024-03-15 103 3-2

GSI: TournamentRegionIndex (マルチ属性キー)

tournamentId (PK) リージョン (PK) ラウンド (SK) ブラケット (SK) matchId (SK) player1Id player2Id matchDate 勝者 score
WINTER2024 NA-EAST FINALS CHAMPIONSHIP match-001 101 103 2024-01-20 101 3-1
WINTER2024 NA-EAST QUARTERFINALS UPPER match-004 101 109 2024-01-15 101 3-1
WINTER2024 NA-EAST SEMIFINALS UPPER match-002 101 105 2024-01-18 101 3-2
WINTER2024 NA-EAST SEMIFINALS UPPER match-003 103 107 2024-01-18 103 3-0
WINTER2024 NA-WEST FINALS CHAMPIONSHIP match-005 102 104 2024-01-20 102 3-2
WINTER2024 NA-WEST SEMIFINALS UPPER match-006 102 106 2024-01-18 102 3-1
SPRING2024 NA-EAST QUARTERFINALS LOWER match-008 103 110 2024-03-15 103 3-2
SPRING2024 NA-EAST QUARTERFINALS UPPER match-007 101 108 2024-03-15 101 3-0

GSI: PlayerMatchHistoryIndex (マルチ属性キー)

player1Id (PK) matchDate (SK) ラウンド (SK) tournamentId リージョン ブラケット matchId player2Id 勝者 score
101 2024-01-15 QUARTERFINALS WINTER2024 NA-EAST UPPER match-004 109 101 3-1
101 2024-01-18 SEMIFINALS WINTER2024 NA-EAST UPPER match-002 105 101 3-2
101 2024-01-20 FINALS WINTER2024 NA-EAST CHAMPIONSHIP match-001 103 101 3-1
101 2024-03-15 QUARTERFINALS SPRING2024 NA-EAST UPPER match-007 108 101 3-0
102 2024-01-18 SEMIFINALS WINTER2024 NA-WEST UPPER match-006 106 102 3-1
102 2024-01-20 FINALS WINTER2024 NA-WEST CHAMPIONSHIP match-005 104 102 3-2
103 2024-01-18 SEMIFINALS WINTER2024 NA-EAST UPPER match-003 107 103 3-0
103 2024-03-15 QUARTERFINALS SPRING2024 NA-EAST LOWER match-008 110 103 3-2

前提条件

開始する前に、以下を確認してください。

アカウントとアクセス許可

  • アクティブな AWS アカウント (必要に応じてここで作成)

  • DynamoDB オペレーションの IAM アクセス許可:

    • dynamodb:CreateTable

    • dynamodb:DeleteTable

    • dynamodb:DescribeTable

    • dynamodb:PutItem

    • dynamodb:Query

    • dynamodb:BatchWriteItem

注記

セキュリティ上の注意: 本番稼働用には、必要なアクセス許可のみを持つカスタム IAM ポリシーを作成します。このチュートリアルでは、AWS 管理ポリシー AmazonDynamoDBFullAccessV2 を使用できます。

開発環境

  • マシンにインストールされている「Node.js」

  • 次のいずれかの方法を使用して設定される AWS 認証情報

オプション 1: AWS CLI

aws configure

オプション 2: 環境変数

export AWS_ACCESS_KEY_ID=your_access_key_here export AWS_SECRET_ACCESS_KEY=your_secret_key_here export AWS_DEFAULT_REGION=us-east-1

必要なパッケージのインストール

npm install @aws-sdk/client-dynamodb @aws-sdk/lib-dynamodb

実装

ステップ 1: マルチ属性キーを使用して GSI でテーブルを作成する

シンプルなベースキー構造と、マルチ属性キーを使用する GSI を持つテーブルを作成します。

import { DynamoDBClient, CreateTableCommand } from "@aws-sdk/client-dynamodb"; const client = new DynamoDBClient({ region: 'us-west-2' }); const response = await client.send(new CreateTableCommand({ TableName: 'TournamentMatches', // Base table: Simple partition key KeySchema: [ { AttributeName: 'matchId', KeyType: 'HASH' } // Simple PK ], AttributeDefinitions: [ { AttributeName: 'matchId', AttributeType: 'S' }, { AttributeName: 'tournamentId', AttributeType: 'S' }, { AttributeName: 'region', AttributeType: 'S' }, { AttributeName: 'round', AttributeType: 'S' }, { AttributeName: 'bracket', AttributeType: 'S' }, { AttributeName: 'player1Id', AttributeType: 'S' }, { AttributeName: 'matchDate', AttributeType: 'S' } ], // GSIs with multi-attribute keys GlobalSecondaryIndexes: [ { IndexName: 'TournamentRegionIndex', KeySchema: [ { AttributeName: 'tournamentId', KeyType: 'HASH' }, // GSI PK attribute 1 { AttributeName: 'region', KeyType: 'HASH' }, // GSI PK attribute 2 { AttributeName: 'round', KeyType: 'RANGE' }, // GSI SK attribute 1 { AttributeName: 'bracket', KeyType: 'RANGE' }, // GSI SK attribute 2 { AttributeName: 'matchId', KeyType: 'RANGE' } // GSI SK attribute 3 ], Projection: { ProjectionType: 'ALL' } }, { IndexName: 'PlayerMatchHistoryIndex', KeySchema: [ { AttributeName: 'player1Id', KeyType: 'HASH' }, // GSI PK { AttributeName: 'matchDate', KeyType: 'RANGE' }, // GSI SK attribute 1 { AttributeName: 'round', KeyType: 'RANGE' } // GSI SK attribute 2 ], Projection: { ProjectionType: 'ALL' } } ], BillingMode: 'PAY_PER_REQUEST' })); console.log("Table with multi-attribute GSI keys created successfully");

主要な設計上の決定事項:

ベーステーブル: ベーステーブルは、直接一致検索にシンプルな matchId パーティションキーを使用し、GSI が複雑なクエリパターンを提供する間、ベーステーブル構造を分かりやすく維持します。

TournamentRegionIndex グローバルセカンダリインデックス: TournamentRegionIndex グローバルセカンダリインデックスは、tournamentId + region をマルチ属性パーティションキーとして使用し、両方の属性を組み合わせたハッシュによってデータが分散されるトーナメントリージョンの分離を作成し、特定のトーナメントリージョンのコンテキスト内で効率的なクエリを可能にします。マルチ属性ソートキー (round + bracket + matchId) は、階層の任意のレベルでクエリをサポートする階層ソートを提供し、一般的な (ラウンド) から特定の (マッチ ID) へ自然な順序で並べ替えます。

PlayerMatchHistoryIndex グローバルセカンダリインデックス: PlayerMatchHistoryIndex グローバルセカンダリインデックスは、パーティションキーとして player1Id を使用して選手ごとにデータを再編成し、特定の選手のクロストーナメントクエリを有効にします。マルチ属性ソートキー (matchDate + round) は、日付範囲または特定のトーナメントラウンドでフィルタリングできる時系列の順序を提供します。

ステップ 2: ネイティブ属性を使用してデータを挿入する

自然属性を使用してトーナメントマッチデータを追加します。GSI は、合成キーを必要とせずに、これらの属性を自動的にインデックス化します。

import { DynamoDBClient } from "@aws-sdk/client-dynamodb"; import { DynamoDBDocumentClient, PutCommand } from "@aws-sdk/lib-dynamodb"; const client = new DynamoDBClient({ region: 'us-west-2' }); const docClient = DynamoDBDocumentClient.from(client); // Tournament match data - no synthetic keys needed for GSIs const matches = [ // Winter 2024 Tournament, NA-EAST region { matchId: 'match-001', tournamentId: 'WINTER2024', region: 'NA-EAST', round: 'FINALS', bracket: 'CHAMPIONSHIP', player1Id: '101', player2Id: '103', matchDate: '2024-01-20', winner: '101', score: '3-1' }, { matchId: 'match-002', tournamentId: 'WINTER2024', region: 'NA-EAST', round: 'SEMIFINALS', bracket: 'UPPER', player1Id: '101', player2Id: '105', matchDate: '2024-01-18', winner: '101', score: '3-2' }, { matchId: 'match-003', tournamentId: 'WINTER2024', region: 'NA-EAST', round: 'SEMIFINALS', bracket: 'UPPER', player1Id: '103', player2Id: '107', matchDate: '2024-01-18', winner: '103', score: '3-0' }, { matchId: 'match-004', tournamentId: 'WINTER2024', region: 'NA-EAST', round: 'QUARTERFINALS', bracket: 'UPPER', player1Id: '101', player2Id: '109', matchDate: '2024-01-15', winner: '101', score: '3-1' }, // Winter 2024 Tournament, NA-WEST region { matchId: 'match-005', tournamentId: 'WINTER2024', region: 'NA-WEST', round: 'FINALS', bracket: 'CHAMPIONSHIP', player1Id: '102', player2Id: '104', matchDate: '2024-01-20', winner: '102', score: '3-2' }, { matchId: 'match-006', tournamentId: 'WINTER2024', region: 'NA-WEST', round: 'SEMIFINALS', bracket: 'UPPER', player1Id: '102', player2Id: '106', matchDate: '2024-01-18', winner: '102', score: '3-1' }, // Spring 2024 Tournament, NA-EAST region { matchId: 'match-007', tournamentId: 'SPRING2024', region: 'NA-EAST', round: 'QUARTERFINALS', bracket: 'UPPER', player1Id: '101', player2Id: '108', matchDate: '2024-03-15', winner: '101', score: '3-0' }, { matchId: 'match-008', tournamentId: 'SPRING2024', region: 'NA-EAST', round: 'QUARTERFINALS', bracket: 'LOWER', player1Id: '103', player2Id: '110', matchDate: '2024-03-15', winner: '103', score: '3-2' } ]; // Insert all matches for (const match of matches) { await docClient.send(new PutCommand({ TableName: 'TournamentMatches', Item: match })); console.log(`Added: ${match.matchId} - ${match.tournamentId}/${match.region} - ${match.round} ${match.bracket}`); } console.log(`\nInserted ${matches.length} tournament matches`); console.log("No synthetic keys created - GSIs use native attributes automatically");

データ構造の説明:

自然属性の使用: 各属性は、文字列の連結や解析を必要とせずに実際のトーナメントの概念を表し、ドメインモデルへの直接マッピングを提供します。

自動グローバルセカンダリインデックスの作成: GSI、合成連結キーを必要とせずに、既存の属性 (TournamentRegionIndex matchIdの場合は tournamentIdregionroundbracket、PlayerMatchHistoryIndex の場合は player1IdmatchDateround) を使用して項目を自動的にインデックス作成します。

バックフィルが不要: マルチ属性キーを持つ新しいグローバルセカンダリインデックスを既存のテーブルに追加すると、DynamoDB は自然属性を使用して既存のすべての項目を自動的にインデックス化します。合成キーを使用して項目を更新する必要はありません。

ステップ 3: すべてのパーティションキー属性を使用して TournamentRegionIndex グローバルセカンダリインデックスをクエリする

この例では、マルチ属性パーティションキー (tournamentId + region) を持つ TournamentRegionIndex グローバルセカンダリインデックスをクエリします。すべてのパーティションキー属性は、クエリで等号条件で指定する必要があります。tournamentId 単独でクエリを実行したり、パーティションキー属性で不等価演算子を使用したりすることはできません。

import { DynamoDBClient } from "@aws-sdk/client-dynamodb"; import { DynamoDBDocumentClient, QueryCommand } from "@aws-sdk/lib-dynamodb"; const client = new DynamoDBClient({ region: 'us-west-2' }); const docClient = DynamoDBDocumentClient.from(client); // Query GSI: All matches for WINTER2024 tournament in NA-EAST region const response = await docClient.send(new QueryCommand({ TableName: 'TournamentMatches', IndexName: 'TournamentRegionIndex', KeyConditionExpression: 'tournamentId = :tournament AND #region = :region', ExpressionAttributeNames: { '#region': 'region', // 'region' is a reserved keyword '#tournament': 'tournament' }, ExpressionAttributeValues: { ':tournament': 'WINTER2024', ':region': 'NA-EAST' } })); console.log(`Found ${response.Items.length} matches for WINTER2024/NA-EAST:\n`); response.Items.forEach(match => { console.log(` ${match.round} | ${match.bracket} | ${match.matchId}`); console.log(` Players: ${match.player1Id} vs ${match.player2Id}`); console.log(` Winner: ${match.winner}, Score: ${match.score}\n`); });

正常な出力:

Found 4 matches for WINTER2024/NA-EAST:

  FINALS | CHAMPIONSHIP | match-001
    Players: 101 vs 103
    Winner: 101, Score: 3-1

  QUARTERFINALS | UPPER | match-004
    Players: 101 vs 109
    Winner: 101, Score: 3-1

  SEMIFINALS | UPPER | match-002
    Players: 101 vs 105
    Winner: 101, Score: 3-2

  SEMIFINALS | UPPER | match-003
    Players: 103 vs 107
    Winner: 103, Score: 3-0

無効なクエリ:

// Missing region attribute KeyConditionExpression: 'tournamentId = :tournament' // Using inequality on partition key attribute KeyConditionExpression: 'tournamentId = :tournament AND #region > :region'

パフォーマンス: マルチ属性パーティションキーは共にハッシュされ、単一属性キーと同じ O(1) 検索パフォーマンスを提供します。

ステップ 4: グローバルセカンダリインデックスのソートキー left-to-right をクエリする

ソートキー属性は、グローバルセカンダリインデックスで定義されている順序で左から右にクエリする必要があります。この例では、TournamentRegionIndex をさまざまな階層レベルでクエリする方法を示します。フィルタリングは、round のみ、round + bracket、または 3 つのソートキー属性すべてで行います。途中で属性をスキップすることはできません。例えば、bracket のスキップ中に roundmatchId でクエリを実行することはできません。

import { DynamoDBClient } from "@aws-sdk/client-dynamodb"; import { DynamoDBDocumentClient, QueryCommand } from "@aws-sdk/lib-dynamodb"; const client = new DynamoDBClient({ region: 'us-west-2' }); const docClient = DynamoDBDocumentClient.from(client); // Query 1: Filter by first sort key attribute (round) console.log("Query 1: All SEMIFINALS matches"); const query1 = await docClient.send(new QueryCommand({ TableName: 'TournamentMatches', IndexName: 'TournamentRegionIndex', KeyConditionExpression: 'tournamentId = :tournament AND #region = :region AND round = :round', ExpressionAttributeNames: { '#region': 'region' // 'region' is a reserved keyword }, ExpressionAttributeValues: { ':tournament': 'WINTER2024', ':region': 'NA-EAST', ':round': 'SEMIFINALS' } })); console.log(` Found ${query1.Items.length} matches\n`); // Query 2: Filter by first two sort key attributes (round + bracket) console.log("Query 2: SEMIFINALS UPPER bracket matches"); const query2 = await docClient.send(new QueryCommand({ TableName: 'TournamentMatches', IndexName: 'TournamentRegionIndex', KeyConditionExpression: 'tournamentId = :tournament AND #region = :region AND round = :round AND bracket = :bracket', ExpressionAttributeNames: { '#region': 'region' // 'region' is a reserved keyword }, ExpressionAttributeValues: { ':tournament': 'WINTER2024', ':region': 'NA-EAST', ':round': 'SEMIFINALS', ':bracket': 'UPPER' } })); console.log(` Found ${query2.Items.length} matches\n`); // Query 3: Filter by all three sort key attributes (round + bracket + matchId) console.log("Query 3: Specific match in SEMIFINALS UPPER bracket"); const query3 = await docClient.send(new QueryCommand({ TableName: 'TournamentMatches', IndexName: 'TournamentRegionIndex', KeyConditionExpression: 'tournamentId = :tournament AND #region = :region AND round = :round AND bracket = :bracket AND matchId = :matchId', ExpressionAttributeNames: { '#region': 'region' // 'region' is a reserved keyword }, ExpressionAttributeValues: { ':tournament': 'WINTER2024', ':region': 'NA-EAST', ':round': 'SEMIFINALS', ':bracket': 'UPPER', ':matchId': 'match-002' } })); console.log(` Found ${query3.Items.length} matches\n`); // Query 4: INVALID - skipping round console.log("Query 4: Attempting to skip first sort key attribute (WILL FAIL)"); try { const query4 = await docClient.send(new QueryCommand({ TableName: 'TournamentMatches', IndexName: 'TournamentRegionIndex', KeyConditionExpression: 'tournamentId = :tournament AND #region = :region AND bracket = :bracket', ExpressionAttributeNames: { '#region': 'region' // 'region' is a reserved keyword }, ExpressionAttributeValues: { ':tournament': 'WINTER2024', ':region': 'NA-EAST', ':bracket': 'UPPER' } })); } catch (error) { console.log(` Error: ${error.message}`); console.log(` Cannot skip sort key attributes - must query left-to-right\n`); }

正常な出力:

Query 1: All SEMIFINALS matches
  Found 2 matches

Query 2: SEMIFINALS UPPER bracket matches
  Found 2 matches

Query 3: Specific match in SEMIFINALS UPPER bracket
  Found 1 matches

Query 4: Attempting to skip first sort key attribute (WILL FAIL)
  Error: Query key condition not supported
  Cannot skip sort key attributes - must query left-to-right

Left-to-right クエリルール: なにもスキップせずに左から右の順にクエリする必要があります。

有効なパターン:

  • 最初の属性のみ: round = 'SEMIFINALS'

  • 最初の 2 つの属性: round = 'SEMIFINALS' AND bracket = 'UPPER'

  • 3 つの属性すべて: round = 'SEMIFINALS' AND bracket = 'UPPER' AND matchId = 'match-002'

無効なパターン:

  • 最初の属性をスキップする: bracket = 'UPPER' (ラウンドをスキップ)

  • 順不同のクエリ: matchId = 'match-002' AND round = 'SEMIFINALS'

  • ギャップを残す: round = 'SEMIFINALS' AND matchId = 'match-002' (ブラケットをスキップ)

注記

設計のヒント: クエリの柔軟性を最大化するために、ソートキー属性を最も一般的なものから最も具体的な順に並べます。

ステップ 5: グローバルセカンダリインデックスのソートキーで不等価条件を使用する

不等価条件は、クエリの最後の条件である必要があります。この例では、ソートキー属性で比較演算子 (>=BETWEEN) とプレフィックスマッチング (begins_with()) を使用する方法を示します。不等価演算子を使用すると、その後にソートキー条件を追加することはできません。不等価はキー条件式の最終条件である必要があります。

import { DynamoDBClient } from "@aws-sdk/client-dynamodb"; import { DynamoDBDocumentClient, QueryCommand } from "@aws-sdk/lib-dynamodb"; const client = new DynamoDBClient({ region: 'us-west-2' }); const docClient = DynamoDBDocumentClient.from(client); // Query 1: Round comparison (inequality on first sort key attribute) console.log("Query 1: Matches from QUARTERFINALS onwards"); const query1 = await docClient.send(new QueryCommand({ TableName: 'TournamentMatches', IndexName: 'TournamentRegionIndex', KeyConditionExpression: 'tournamentId = :tournament AND #region = :region AND round >= :round', ExpressionAttributeNames: { '#region': 'region' // 'region' is a reserved keyword }, ExpressionAttributeValues: { ':tournament': 'WINTER2024', ':region': 'NA-EAST', ':round': 'QUARTERFINALS' } })); console.log(` Found ${query1.Items.length} matches\n`); // Query 2: Round range with BETWEEN console.log("Query 2: Matches between QUARTERFINALS and SEMIFINALS"); const query2 = await docClient.send(new QueryCommand({ TableName: 'TournamentMatches', IndexName: 'TournamentRegionIndex', KeyConditionExpression: 'tournamentId = :tournament AND #region = :region AND round BETWEEN :start AND :end', ExpressionAttributeNames: { '#region': 'region' // 'region' is a reserved keyword }, ExpressionAttributeValues: { ':tournament': 'WINTER2024', ':region': 'NA-EAST', ':start': 'QUARTERFINALS', ':end': 'SEMIFINALS' } })); console.log(` Found ${query2.Items.length} matches\n`); // Query 3: Prefix matching with begins_with (treated as inequality) console.log("Query 3: Matches in brackets starting with 'U'"); const query3 = await docClient.send(new QueryCommand({ TableName: 'TournamentMatches', IndexName: 'TournamentRegionIndex', KeyConditionExpression: 'tournamentId = :tournament AND #region = :region AND round = :round AND begins_with(bracket, :prefix)', ExpressionAttributeNames: { '#region': 'region' // 'region' is a reserved keyword }, ExpressionAttributeValues: { ':tournament': 'WINTER2024', ':region': 'NA-EAST', ':round': 'SEMIFINALS', ':prefix': 'U' } })); console.log(` Found ${query3.Items.length} matches\n`); // Query 4: INVALID - condition after inequality console.log("Query 4: Attempting condition after inequality (WILL FAIL)"); try { const query4 = await docClient.send(new QueryCommand({ TableName: 'TournamentMatches', IndexName: 'TournamentRegionIndex', KeyConditionExpression: 'tournamentId = :tournament AND #region = :region AND round > :round AND bracket = :bracket', ExpressionAttributeNames: { '#region': 'region' // 'region' is a reserved keyword }, ExpressionAttributeValues: { ':tournament': 'WINTER2024', ':region': 'NA-EAST', ':round': 'QUARTERFINALS', ':bracket': 'UPPER' } })); } catch (error) { console.log(` Error: ${error.message}`); console.log(` Cannot add conditions after inequality - it must be last\n`); }

不等価演算子ルール: 比較演算子 (>>=<<=) を使用できます。BETWEEN は範囲クエリに、begins_with() はプレフィックスマッチングに使用できます。不等価は、クエリの最後の条件である必要があります。

有効なパターン:

  • 等価条件の後に不等価が続きます: round = 'SEMIFINALS' AND bracket = 'UPPER' AND matchId > 'match-001'

  • 最初の属性の不等価: round BETWEEN 'QUARTERFINALS' AND 'SEMIFINALS'

  • 最終条件としてのプレフィックスマッチング: round = 'SEMIFINALS' AND begins_with(bracket, 'U')

無効なパターン:

  • 不等価の後に条件を追加する: round > 'QUARTERFINALS' AND bracket = 'UPPER'

  • 複数の不等価の使用: round > 'QUARTERFINALS' AND bracket > 'L'

重要

begins_with() は不等価条件として扱われるため、追加のソートキー条件をフォローすることはできません。

ステップ 6: マルチ属性ソートキーを使用して PlayerMatchHistoryIndex グローバルセカンダリインデックスをクエリする

この例では、単一のパーティションキー (player1Id) とマルチ属性ソートキー (matchDate + round) を持つ PlayerMatchHistoryIndex をクエリします。これにより、トーナメント ID を知らずに特定の選手のすべてのマッチングをクエリすることで、クロストーナメント分析が可能になります。ベーステーブルでは、トーナメントとリージョンの組み合わせごとに個別のクエリが必要になります。

import { DynamoDBClient } from "@aws-sdk/client-dynamodb"; import { DynamoDBDocumentClient, QueryCommand } from "@aws-sdk/lib-dynamodb"; const client = new DynamoDBClient({ region: 'us-west-2' }); const docClient = DynamoDBDocumentClient.from(client); // Query 1: All matches for Player 101 across all tournaments console.log("Query 1: All matches for Player 101"); const query1 = await docClient.send(new QueryCommand({ TableName: 'TournamentMatches', IndexName: 'PlayerMatchHistoryIndex', KeyConditionExpression: 'player1Id = :player', ExpressionAttributeValues: { ':player': '101' } })); console.log(` Found ${query1.Items.length} matches for Player 101:`); query1.Items.forEach(match => { console.log(` ${match.tournamentId}/${match.region} - ${match.matchDate} - ${match.round}`); }); console.log(); // Query 2: Player 101 matches on specific date console.log("Query 2: Player 101 matches on 2024-01-18"); const query2 = await docClient.send(new QueryCommand({ TableName: 'TournamentMatches', IndexName: 'PlayerMatchHistoryIndex', KeyConditionExpression: 'player1Id = :player AND matchDate = :date', ExpressionAttributeValues: { ':player': '101', ':date': '2024-01-18' } })); console.log(` Found ${query2.Items.length} matches\n`); // Query 3: Player 101 SEMIFINALS matches on specific date console.log("Query 3: Player 101 SEMIFINALS matches on 2024-01-18"); const query3 = await docClient.send(new QueryCommand({ TableName: 'TournamentMatches', IndexName: 'PlayerMatchHistoryIndex', KeyConditionExpression: 'player1Id = :player AND matchDate = :date AND round = :round', ExpressionAttributeValues: { ':player': '101', ':date': '2024-01-18', ':round': 'SEMIFINALS' } })); console.log(` Found ${query3.Items.length} matches\n`); // Query 4: Player 101 matches in date range console.log("Query 4: Player 101 matches in January 2024"); const query4 = await docClient.send(new QueryCommand({ TableName: 'TournamentMatches', IndexName: 'PlayerMatchHistoryIndex', KeyConditionExpression: 'player1Id = :player AND matchDate BETWEEN :start AND :end', ExpressionAttributeValues: { ':player': '101', ':start': '2024-01-01', ':end': '2024-01-31' } })); console.log(` Found ${query4.Items.length} matches\n`);

パターンのバリエーション

マルチ属性キーを使用した時系列データ

階層時間属性を使用して時系列クエリを最適化する

{ TableName: 'IoTReadings', // Base table: Simple partition key KeySchema: [ { AttributeName: 'readingId', KeyType: 'HASH' } ], AttributeDefinitions: [ { AttributeName: 'readingId', AttributeType: 'S' }, { AttributeName: 'deviceId', AttributeType: 'S' }, { AttributeName: 'locationId', AttributeType: 'S' }, { AttributeName: 'year', AttributeType: 'S' }, { AttributeName: 'month', AttributeType: 'S' }, { AttributeName: 'day', AttributeType: 'S' }, { AttributeName: 'timestamp', AttributeType: 'S' } ], // GSI with multi-attribute keys for time-series queries GlobalSecondaryIndexes: [{ IndexName: 'DeviceLocationTimeIndex', KeySchema: [ { AttributeName: 'deviceId', KeyType: 'HASH' }, { AttributeName: 'locationId', KeyType: 'HASH' }, { AttributeName: 'year', KeyType: 'RANGE' }, { AttributeName: 'month', KeyType: 'RANGE' }, { AttributeName: 'day', KeyType: 'RANGE' }, { AttributeName: 'timestamp', KeyType: 'RANGE' } ], Projection: { ProjectionType: 'ALL' } }], BillingMode: 'PAY_PER_REQUEST' } // Query patterns enabled via GSI: // - All readings for device in location // - Readings for specific year // - Readings for specific month in year // - Readings for specific day // - Readings in time range

メリット: 自然時間階層 (年 → 月 → 日 → タイムスタンプ) を使用すると、日付の解析や操作を行わずに、いつでも効率的にきめ細やかなクエリを実行できます。グローバルセカンダリインデックスは、自然時間属性を使用してすべての読み取り値を自動的にインデックス化します。

マルチ属性キーを使用した e コマース注文

複数のディメンションを持つ注文を追跡する

{ TableName: 'Orders', // Base table: Simple partition key KeySchema: [ { AttributeName: 'orderId', KeyType: 'HASH' } ], AttributeDefinitions: [ { AttributeName: 'orderId', AttributeType: 'S' }, { AttributeName: 'sellerId', AttributeType: 'S' }, { AttributeName: 'region', AttributeType: 'S' }, { AttributeName: 'orderDate', AttributeType: 'S' }, { AttributeName: 'category', AttributeType: 'S' }, { AttributeName: 'customerId', AttributeType: 'S' }, { AttributeName: 'orderStatus', AttributeType: 'S' } ], GlobalSecondaryIndexes: [ { IndexName: 'SellerRegionIndex', KeySchema: [ { AttributeName: 'sellerId', KeyType: 'HASH' }, { AttributeName: 'region', KeyType: 'HASH' }, { AttributeName: 'orderDate', KeyType: 'RANGE' }, { AttributeName: 'category', KeyType: 'RANGE' }, { AttributeName: 'orderId', KeyType: 'RANGE' } ], Projection: { ProjectionType: 'ALL' } }, { IndexName: 'CustomerOrdersIndex', KeySchema: [ { AttributeName: 'customerId', KeyType: 'HASH' }, { AttributeName: 'orderDate', KeyType: 'RANGE' }, { AttributeName: 'orderStatus', KeyType: 'RANGE' } ], Projection: { ProjectionType: 'ALL' } } ], BillingMode: 'PAY_PER_REQUEST' } // SellerRegionIndex GSI queries: // - Orders by seller and region // - Orders by seller, region, and date // - Orders by seller, region, date, and category // CustomerOrdersIndex GSI queries: // - Customer's orders // - Customer's orders by date // - Customer's orders by date and status

階層組織データ

モデル組織階層

{ TableName: 'Employees', // Base table: Simple partition key KeySchema: [ { AttributeName: 'employeeId', KeyType: 'HASH' } ], AttributeDefinitions: [ { AttributeName: 'employeeId', AttributeType: 'S' }, { AttributeName: 'companyId', AttributeType: 'S' }, { AttributeName: 'divisionId', AttributeType: 'S' }, { AttributeName: 'departmentId', AttributeType: 'S' }, { AttributeName: 'teamId', AttributeType: 'S' }, { AttributeName: 'skillCategory', AttributeType: 'S' }, { AttributeName: 'skillLevel', AttributeType: 'S' }, { AttributeName: 'yearsExperience', AttributeType: 'N' } ], GlobalSecondaryIndexes: [ { IndexName: 'OrganizationIndex', KeySchema: [ { AttributeName: 'companyId', KeyType: 'HASH' }, { AttributeName: 'divisionId', KeyType: 'HASH' }, { AttributeName: 'departmentId', KeyType: 'RANGE' }, { AttributeName: 'teamId', KeyType: 'RANGE' }, { AttributeName: 'employeeId', KeyType: 'RANGE' } ], Projection: { ProjectionType: 'ALL' } }, { IndexName: 'SkillsIndex', KeySchema: [ { AttributeName: 'skillCategory', KeyType: 'HASH' }, { AttributeName: 'skillLevel', KeyType: 'RANGE' }, { AttributeName: 'yearsExperience', KeyType: 'RANGE' } ], Projection: { ProjectionType: 'INCLUDE', NonKeyAttributes: ['employeeId', 'name'] } } ], BillingMode: 'PAY_PER_REQUEST' } // OrganizationIndex GSI query patterns: // - All employees in company/division // - Employees in specific department // - Employees in specific team // SkillsIndex GSI query patterns: // - Employees by skill and experience level

スパースマルチ属性キー

マルチ属性キーを組み合わせてスパース GSI を作成する

{ TableName: 'Products', // Base table: Simple partition key KeySchema: [ { AttributeName: 'productId', KeyType: 'HASH' } ], AttributeDefinitions: [ { AttributeName: 'productId', AttributeType: 'S' }, { AttributeName: 'categoryId', AttributeType: 'S' }, { AttributeName: 'subcategoryId', AttributeType: 'S' }, { AttributeName: 'averageRating', AttributeType: 'N' }, { AttributeName: 'reviewCount', AttributeType: 'N' } ], GlobalSecondaryIndexes: [ { IndexName: 'CategoryIndex', KeySchema: [ { AttributeName: 'categoryId', KeyType: 'HASH' }, { AttributeName: 'subcategoryId', KeyType: 'HASH' }, { AttributeName: 'productId', KeyType: 'RANGE' } ], Projection: { ProjectionType: 'ALL' } }, { IndexName: 'ReviewedProductsIndex', KeySchema: [ { AttributeName: 'categoryId', KeyType: 'HASH' }, { AttributeName: 'averageRating', KeyType: 'RANGE' }, // Optional attribute { AttributeName: 'reviewCount', KeyType: 'RANGE' } // Optional attribute ], Projection: { ProjectionType: 'ALL' } } ], BillingMode: 'PAY_PER_REQUEST' } // Only products with reviews appear in ReviewedProductsIndex GSI // Automatic filtering without application logic // Multi-attribute sort key enables rating and count queries

SaaS とマルチテナンシー

顧客分離を備えたマルチテナント SaaS プラットフォーム

// Table design { TableName: 'SaasData', // Base table: Simple partition key KeySchema: [ { AttributeName: 'resourceId', KeyType: 'HASH' } ], AttributeDefinitions: [ { AttributeName: 'resourceId', AttributeType: 'S' }, { AttributeName: 'tenantId', AttributeType: 'S' }, { AttributeName: 'customerId', AttributeType: 'S' }, { AttributeName: 'resourceType', AttributeType: 'S' } ], // GSI with multi-attribute keys for tenant-customer isolation GlobalSecondaryIndexes: [{ IndexName: 'TenantCustomerIndex', KeySchema: [ { AttributeName: 'tenantId', KeyType: 'HASH' }, { AttributeName: 'customerId', KeyType: 'HASH' }, { AttributeName: 'resourceType', KeyType: 'RANGE' }, { AttributeName: 'resourceId', KeyType: 'RANGE' } ], Projection: { ProjectionType: 'ALL' } }], BillingMode: 'PAY_PER_REQUEST' } // Query GSI: All resources for tenant T001, customer C001 const resources = await docClient.send(new QueryCommand({ TableName: 'SaasData', IndexName: 'TenantCustomerIndex', KeyConditionExpression: 'tenantId = :tenant AND customerId = :customer', ExpressionAttributeValues: { ':tenant': 'T001', ':customer': 'C001' } })); // Query GSI: Specific resource type for tenant/customer const documents = await docClient.send(new QueryCommand({ TableName: 'SaasData', IndexName: 'TenantCustomerIndex', KeyConditionExpression: 'tenantId = :tenant AND customerId = :customer AND resourceType = :type', ExpressionAttributeValues: { ':tenant': 'T001', ':customer': 'C001', ':type': 'document' } }));

メリット: テナントと顧客のコンテキストと自然データ組織内の効率的なクエリ。

金融取引

GSI を使用した銀行システム追跡アカウントトランザクション

// Table design { TableName: 'BankTransactions', // Base table: Simple partition key KeySchema: [ { AttributeName: 'transactionId', KeyType: 'HASH' } ], AttributeDefinitions: [ { AttributeName: 'transactionId', AttributeType: 'S' }, { AttributeName: 'accountId', AttributeType: 'S' }, { AttributeName: 'year', AttributeType: 'S' }, { AttributeName: 'month', AttributeType: 'S' }, { AttributeName: 'day', AttributeType: 'S' }, { AttributeName: 'transactionType', AttributeType: 'S' } ], GlobalSecondaryIndexes: [ { IndexName: 'AccountTimeIndex', KeySchema: [ { AttributeName: 'accountId', KeyType: 'HASH' }, { AttributeName: 'year', KeyType: 'RANGE' }, { AttributeName: 'month', KeyType: 'RANGE' }, { AttributeName: 'day', KeyType: 'RANGE' }, { AttributeName: 'transactionId', KeyType: 'RANGE' } ], Projection: { ProjectionType: 'ALL' } }, { IndexName: 'TransactionTypeIndex', KeySchema: [ { AttributeName: 'accountId', KeyType: 'HASH' }, { AttributeName: 'transactionType', KeyType: 'RANGE' }, { AttributeName: 'year', KeyType: 'RANGE' }, { AttributeName: 'month', KeyType: 'RANGE' } ], Projection: { ProjectionType: 'ALL' } } ], BillingMode: 'PAY_PER_REQUEST' } // Query AccountTimeIndex GSI: All transactions for account in 2023 const yearTransactions = await docClient.send(new QueryCommand({ TableName: 'BankTransactions', IndexName: 'AccountTimeIndex', KeyConditionExpression: 'accountId = :account AND #year = :year', ExpressionAttributeNames: { '#year': 'year' }, ExpressionAttributeValues: { ':account': 'ACC-12345', ':year': '2023' } })); // Query AccountTimeIndex GSI: Transactions in specific month const monthTransactions = await docClient.send(new QueryCommand({ TableName: 'BankTransactions', IndexName: 'AccountTimeIndex', KeyConditionExpression: 'accountId = :account AND #year = :year AND #month = :month', ExpressionAttributeNames: { '#year': 'year', '#month': 'month' }, ExpressionAttributeValues: { ':account': 'ACC-12345', ':year': '2023', ':month': '11' } })); // Query TransactionTypeIndex GSI: Deposits in 2023 const deposits = await docClient.send(new QueryCommand({ TableName: 'BankTransactions', IndexName: 'TransactionTypeIndex', KeyConditionExpression: 'accountId = :account AND transactionType = :type AND #year = :year', ExpressionAttributeNames: { '#year': 'year' }, ExpressionAttributeValues: { ':account': 'ACC-12345', ':type': 'deposit', ':year': '2023' } }));

完全な例

次の例は、セットアップからクリーンアップまでのマルチ属性キーを示しています。

import { DynamoDBClient, CreateTableCommand, DeleteTableCommand, waitUntilTableExists } from "@aws-sdk/client-dynamodb"; import { DynamoDBDocumentClient, PutCommand, QueryCommand } from "@aws-sdk/lib-dynamodb"; const client = new DynamoDBClient({ region: 'us-west-2' }); const docClient = DynamoDBDocumentClient.from(client); async function multiAttributeKeysDemo() { console.log("Starting Multi-Attribute GSI Keys Demo\n"); // Step 1: Create table with GSIs using multi-attribute keys console.log("1. Creating table with multi-attribute GSI keys..."); await client.send(new CreateTableCommand({ TableName: 'TournamentMatches', KeySchema: [ { AttributeName: 'matchId', KeyType: 'HASH' } ], AttributeDefinitions: [ { AttributeName: 'matchId', AttributeType: 'S' }, { AttributeName: 'tournamentId', AttributeType: 'S' }, { AttributeName: 'region', AttributeType: 'S' }, { AttributeName: 'round', AttributeType: 'S' }, { AttributeName: 'bracket', AttributeType: 'S' }, { AttributeName: 'player1Id', AttributeType: 'S' }, { AttributeName: 'matchDate', AttributeType: 'S' } ], GlobalSecondaryIndexes: [ { IndexName: 'TournamentRegionIndex', KeySchema: [ { AttributeName: 'tournamentId', KeyType: 'HASH' }, { AttributeName: 'region', KeyType: 'HASH' }, { AttributeName: 'round', KeyType: 'RANGE' }, { AttributeName: 'bracket', KeyType: 'RANGE' }, { AttributeName: 'matchId', KeyType: 'RANGE' } ], Projection: { ProjectionType: 'ALL' } }, { IndexName: 'PlayerMatchHistoryIndex', KeySchema: [ { AttributeName: 'player1Id', KeyType: 'HASH' }, { AttributeName: 'matchDate', KeyType: 'RANGE' }, { AttributeName: 'round', KeyType: 'RANGE' } ], Projection: { ProjectionType: 'ALL' } } ], BillingMode: 'PAY_PER_REQUEST' })); await waitUntilTableExists({ client, maxWaitTime: 120 }, { TableName: 'TournamentMatches' }); console.log("Table created\n"); // Step 2: Insert tournament matches console.log("2. Inserting tournament matches..."); const matches = [ { matchId: 'match-001', tournamentId: 'WINTER2024', region: 'NA-EAST', round: 'FINALS', bracket: 'CHAMPIONSHIP', player1Id: '101', player2Id: '103', matchDate: '2024-01-20', winner: '101', score: '3-1' }, { matchId: 'match-002', tournamentId: 'WINTER2024', region: 'NA-EAST', round: 'SEMIFINALS', bracket: 'UPPER', player1Id: '101', player2Id: '105', matchDate: '2024-01-18', winner: '101', score: '3-2' }, { matchId: 'match-003', tournamentId: 'WINTER2024', region: 'NA-WEST', round: 'FINALS', bracket: 'CHAMPIONSHIP', player1Id: '102', player2Id: '104', matchDate: '2024-01-20', winner: '102', score: '3-2' }, { matchId: 'match-004', tournamentId: 'SPRING2024', region: 'NA-EAST', round: 'QUARTERFINALS', bracket: 'UPPER', player1Id: '101', player2Id: '108', matchDate: '2024-03-15', winner: '101', score: '3-0' } ]; for (const match of matches) { await docClient.send(new PutCommand({ TableName: 'TournamentMatches', Item: match })); } console.log(`Inserted ${matches.length} tournament matches\n`); // Step 3: Query GSI with multi-attribute partition key console.log("3. Query TournamentRegionIndex GSI: WINTER2024/NA-EAST matches"); const gsiQuery1 = await docClient.send(new QueryCommand({ TableName: 'TournamentMatches', IndexName: 'TournamentRegionIndex', KeyConditionExpression: 'tournamentId = :tournament AND #region = :region', ExpressionAttributeNames: { '#region': 'region' }, ExpressionAttributeValues: { ':tournament': 'WINTER2024', ':region': 'NA-EAST' } })); console.log(` Found ${gsiQuery1.Items.length} matches:`); gsiQuery1.Items.forEach(match => { console.log(` ${match.round} - ${match.bracket} - ${match.winner} won`); }); // Step 4: Query GSI with multi-attribute sort key console.log("\n4. Query PlayerMatchHistoryIndex GSI: All matches for Player 101"); const gsiQuery2 = await docClient.send(new QueryCommand({ TableName: 'TournamentMatches', IndexName: 'PlayerMatchHistoryIndex', KeyConditionExpression: 'player1Id = :player', ExpressionAttributeValues: { ':player': '101' } })); console.log(` Found ${gsiQuery2.Items.length} matches for Player 101:`); gsiQuery2.Items.forEach(match => { console.log(` ${match.tournamentId}/${match.region} - ${match.matchDate} - ${match.round}`); }); console.log("\nDemo complete"); console.log("No synthetic keys needed - GSIs use native attributes automatically"); } async function cleanup() { console.log("Deleting table..."); await client.send(new DeleteTableCommand({ TableName: 'TournamentMatches' })); console.log("Table deleted"); } // Run demo multiAttributeKeysDemo().catch(console.error); // Uncomment to cleanup: // cleanup().catch(console.error);

最小コードの雛形

// 1. Create table with GSI using multi-attribute keys await client.send(new CreateTableCommand({ TableName: 'MyTable', KeySchema: [ { AttributeName: 'id', KeyType: 'HASH' } // Simple base table PK ], AttributeDefinitions: [ { AttributeName: 'id', AttributeType: 'S' }, { AttributeName: 'attr1', AttributeType: 'S' }, { AttributeName: 'attr2', AttributeType: 'S' }, { AttributeName: 'attr3', AttributeType: 'S' }, { AttributeName: 'attr4', AttributeType: 'S' } ], GlobalSecondaryIndexes: [{ IndexName: 'MyGSI', KeySchema: [ { AttributeName: 'attr1', KeyType: 'HASH' }, // GSI PK attribute 1 { AttributeName: 'attr2', KeyType: 'HASH' }, // GSI PK attribute 2 { AttributeName: 'attr3', KeyType: 'RANGE' }, // GSI SK attribute 1 { AttributeName: 'attr4', KeyType: 'RANGE' } // GSI SK attribute 2 ], Projection: { ProjectionType: 'ALL' } }], BillingMode: 'PAY_PER_REQUEST' })); // 2. Insert items with native attributes (no concatenation needed for GSI) await docClient.send(new PutCommand({ TableName: 'MyTable', Item: { id: 'item-001', attr1: 'value1', attr2: 'value2', attr3: 'value3', attr4: 'value4', // ... other attributes } })); // 3. Query GSI with all partition key attributes await docClient.send(new QueryCommand({ TableName: 'MyTable', IndexName: 'MyGSI', KeyConditionExpression: 'attr1 = :v1 AND attr2 = :v2', ExpressionAttributeValues: { ':v1': 'value1', ':v2': 'value2' } })); // 4. Query GSI with sort key attributes (left-to-right) await docClient.send(new QueryCommand({ TableName: 'MyTable', IndexName: 'MyGSI', KeyConditionExpression: 'attr1 = :v1 AND attr2 = :v2 AND attr3 = :v3', ExpressionAttributeValues: { ':v1': 'value1', ':v2': 'value2', ':v3': 'value3' } })); // Note: If any attribute name is a DynamoDB reserved keyword, use ExpressionAttributeNames: // KeyConditionExpression: 'attr1 = :v1 AND #attr2 = :v2' // ExpressionAttributeNames: { '#attr2': 'attr2' }

その他のリソース