Le traduzioni sono generate tramite traduzione automatica. In caso di conflitto tra il contenuto di una traduzione e la versione originale in Inglese, quest'ultima prevarrà.

# Confronto dei pacchetti installati sull'AMI standard di Amazon Linux 2023 con l'immagine AL2 Hyper-V 023
<a name="al2023-ami-hyperv-image"></a>

Un confronto tra la versione RPMs attuale dell'AMI standard AL2 023 e quella RPMs presente sull'immagine Hyper-V AL2 023.


| Pacchetto | AMI | Hyper-V VHDX | 
| --- | --- | --- | 
|  acl  | 2.3.1 | 2.3.1 | 
|  acpid  | 2,0,32 |  | 
|  alternatives  | 1.15 | 1.15 | 
|  amazon-chrony-config  | 4.3 |  | 
|  [https://docs.aws.amazon.com/linux/al2023/ug/networking-service.html](https://docs.aws.amazon.com/linux/al2023/ug/networking-service.html)  | 2.4.1 |  | 
|  [https://docs.aws.amazon.com/linux/al2023/ug/outside-ec2.html](https://docs.aws.amazon.com/linux/al2023/ug/outside-ec2.html)  |  | 1.2 | 
|  amazon-linux-repo-cdn  |  | 2023,420240319 | 
|  amazon-linux-repo-s3  | 2023,420240319 |  | 
|  [https://docs.aws.amazon.com/linux/al2023/ug/uefi-secure-boot.html](https://docs.aws.amazon.com/linux/al2023/ug/uefi-secure-boot.html)  | 2023,1 | 2023,1 | 
|  [https://docs.aws.amazon.com/linux/al2023/ug/outside-ec2.html](https://docs.aws.amazon.com/linux/al2023/ug/outside-ec2.html)  |  | 1.2 | 
|  amazon-rpm-config  | 228 | 228 | 
|  amazon-ssm-agent  | 3,2,2303,0 | 3,2233,0 | 
|  at  | 3,1,23 | 3,1,23 | 
|  attr  | 2.5.1 | 2.5.1 | 
|  audit  | 30,6 | 3.0.6 | 
|  audit-libs  | 3.0.6 | 3.0.6 | 
|  aws-cfn-bootstrap  | 2.0 |  | 
|  awscli-2  | 2.14.5 | 2.14.5 | 
|  basesystem  | 11 | 11 | 
|  bash  | 5,2,15 | 5,2,15 | 
|  bash-completion  | 2.11 | 2.11 | 
|  bc  | 1,07,1 | 1,07,1 | 
|  bind-libs  | 9,16,48 | 9,16,48 | 
|  bind-license  | 9,16,48 | 9,16,48 | 
|  bind-utils  | 9,16,48 | 9,16,48 | 
|  [https://docs.aws.amazon.com/linux/al2023/ug/c-cplusplus.html](https://docs.aws.amazon.com/linux/al2023/ug/c-cplusplus.html)  | 2,39 | 2,39 | 
|  boost-filesystem  | 1,75,0 | 1,75,0 | 
|  boost-system  | 1,75,0 | 1,75,0 | 
|  boost-thread  | 1,75,0 | 1,75,0 | 
|  bzip2  | 1.0.8 | 1.0.8 | 
|  bzip2-libs  | 1.0.8 | 1.0.8 | 
|  ca-certificates  | 2023,2,64 | 2023,2,64 | 
|  c-ares  | 1.19.0 |  | 
|  checkpolicy  | 3.4 | 3.4 | 
|  chkconfig  | 1.15 | 1.15 | 
|  chrony  | 4.3 | 4.3 | 
|  cloud-init  | 222,2 | 222,2 | 
|  cloud-init-cfg-ec2  | 222,2 |  | 
|  cloud-init-cfg-onprem  |  | 222,2 | 
|  cloud-utils-growpart  | 0,31 | 0,31 | 
|  coreutils  | 8,32 | 8,32 | 
|  coreutils-common  | 8,32 | 8,32 | 
|  cpio  | 2,13 | 2,13 | 
|  cracklib  | 2,9,6 | 29.6 | 
|  cracklib-dicts  | 29.6 | 29.6 | 
|  crontabs  | 1.11 | 1.11 | 
|  crypto-policies  | 20220428 | 20220428 | 
|  crypto-policies-scripts  | 20220428 | 20220428 | 
|  cryptsetup  | 2.6.1 | 2.6.1 | 
|  cryptsetup-libs  | 2.6.1 | 2.6.1 | 
|  [https://docs.aws.amazon.com/linux/al2023/ug/compare-with-al2.html#curl-minimal](https://docs.aws.amazon.com/linux/al2023/ug/compare-with-al2.html#curl-minimal)  | 8,5,0 | 8,5,0 | 
|  cyrus-sasl-lib  | 2,1,27 | 2,1,27 | 
|  cyrus-sasl-plain  | 2,1,27 | 2,1,27 | 
|  dbus  | 1,12,28 | 1,12,28 | 
|  dbus-broker  | 32 | 32 | 
|  dbus-common  | 1,12,28 | 1,12,28 | 
|  dbus-libs  | 1,12,28 | 1,12,28 | 
|  device-mapper  | 1,02,185 | 1,02,185 | 
|  device-mapper-libs  | 1,02,185 | 1,02,185 | 
|  diffutils  | 3.8 | 3.8 | 
|  dnf  | 4.14.0 | 4.14.0 | 
|  dnf-data  | 4.14.0 | 4.14.0 | 
|  dnf-plugin-release-notification  | 1.2 | 1.2 | 
|  dnf-plugins-core  | 4.3.0 | 4.3.0 | 
|  dnf-plugin-support-info  | 1.2 | 1.2 | 
|  dnf-utils  | 4.3.0 | 4.3.0 | 
|  dosfstools  | 4.2 | 4.2 | 
|  dracut  | 055 | 055 | 
|  dracut-config-ec2  | 3.0 |  | 
|  dracut-config-generic  | 055 | 055 | 
|  dwz  | 0,14 | 0,14 | 
|  dyninst  | 102,1 | 10.2.1 | 
|  e2fsprogs  | 1,446,5 | 1,46,5 | 
|  e2fsprogs-libs  | 1,46,5 | 1,46,5 | 
|  ec2-hibinit-agent  | 1.0.8 |  | 
|  [https://docs.aws.amazon.com/linux/al2023/ug/connecting-to-instances.html](https://docs.aws.amazon.com/linux/al2023/ug/connecting-to-instances.html)  | 1.1 |  | 
|  ec2-instance-connect-selinux  | 1.1 |  | 
|  ec2-utils  | 2.2.0 |  | 
|  ed  | 1.14.2 | 1.14.2 | 
|  efi-filesystem  | 5 | 5 | 
|  efi-srpm-macros  | 5 | 5 | 
|  efivar  | 38 | 38 | 
|  efivar-libs  | 38 | 38 | 
|  elfutils-debuginfod-client  | 0.188 | 0.188 | 
|  elfutils-default-yama-scope  | 0.188 | 0.188 | 
|  elfutils-libelf  | 0.188 | 0.188 | 
|  elfutils-libs  | 0.188 | 0.188 | 
|  ethtool  | 5,15 | 5,15 | 
|  expat  | 2.5.0 | 2.5.0 | 
|  file  | 5,39 | 5,39 | 
|  file-libs  | 5,39 | 5,39 | 
|  filesystem  | 3,14 | 3,14 | 
|  findutils  | 4.8.0 | 4.8.0 | 
|  fonts-srpm-macros  | 2.0.5 | 2.0.5 | 
|  fstrm  | 0.6.1 | 0.6.1 | 
|  fuse-libs  | 2,9,9 | 29.9 | 
|  gawk  | 5.1.0 | 5.1.0 | 
|  gdbm-libs  | 1,19 | 1,19 | 
|  gdisk  | 1.0.8 | 1.0.8 | 
|  gettext  | 0,21 | 0,21 | 
|  gettext-libs  | 0,21 | 0,21 | 
|  ghc-srpm-macros  | 1.5.0 | 1.5.0 | 
|  glib2  | 2,74,7 | 2,74,7 | 
|  [https://docs.aws.amazon.com/linux/al2023/ug/core-glibc.html](https://docs.aws.amazon.com/linux/al2023/ug/core-glibc.html)  | 2,34 | 2,34 | 
|  glibc-all-langpacks  | 2,34 | 2,34 | 
|  glibc-common  | 2,34 | 2,34 | 
|  glibc-gconv-extra  | 2,34 | 2,34 | 
|  glibc-locale-source  | 2,34 | 2,34 | 
|  gmp  | 62,1 | 6.2.1 | 
|  [https://docs.aws.amazon.com/linux/al2023/ug/compare-with-al2.html#gnupg-minimal](https://docs.aws.amazon.com/linux/al2023/ug/compare-with-al2.html#gnupg-minimal)  | 2.3.7 | 2.3.7 | 
|  gnutls  | 3.8.0 | 3.8.0 | 
|  go-srpm-macros  | 3.2.0 | 3.2.0 | 
|  gpgme  | 1.15.1 | 1.15.1 | 
|  gpm-libs  | 1,20.7 | 1,20.7 | 
|  grep  | 3.8 | 3.8 | 
|  groff-base  | 1,22,4 | 1,22,4 | 
|  grub2-common  | 2,06 | 2,06 | 
|  grub2-efi-x64-ec2  | 2,06 | 2,06 | 
|  grub2-pc  |  | 2,06 | 
|  grub2-pc-modules  | 2,06 | 2,06 | 
|  grub2-tools  | 2,06 | 2,06 | 
|  grub2-tools-minimal  | 2,06 | 2,06 | 
|  grubby  | 8,40 | 8,40 | 
|  gssproxy  | 0.8.4 | 0.8.4 | 
|  gzip  | 1.12 | 1.12 | 
|  hostname  | 3,23 | 3,23 | 
|  hunspell  | 1.7.0 | 1.7.0 | 
|  hunspell-en  | 0,20140811,1 | 0,20140811,1 | 
|  hunspell-en-GB  | 0,20140811,1 | 0,20140811,1 | 
|  hunspell-en-US  | 0,20140811,1 | 0,20140811,1 | 
|  hunspell-filesystem  | 1.7.0 | 1.7.0 | 
|  hwdata  | 0,3353 | 0,3353 | 
|  [https://docs.aws.amazon.com/linux/al2023/ug/hyperv-supported-configurations.html](https://docs.aws.amazon.com/linux/al2023/ug/hyperv-supported-configurations.html)  |  | 0 | 
|  [https://docs.aws.amazon.com/linux/al2023/ug/hyperv-supported-configurations.html](https://docs.aws.amazon.com/linux/al2023/ug/hyperv-supported-configurations.html)  |  | 0 | 
|  [https://docs.aws.amazon.com/linux/al2023/ug/hyperv-supported-configurations.html](https://docs.aws.amazon.com/linux/al2023/ug/hyperv-supported-configurations.html)  |  | 0 | 
|  [https://docs.aws.amazon.com/linux/al2023/ug/hyperv-supported-configurations.html](https://docs.aws.amazon.com/linux/al2023/ug/hyperv-supported-configurations.html)  |  | 0 | 
|  [https://docs.aws.amazon.com/linux/al2023/ug/hyperv-supported-configurations.html](https://docs.aws.amazon.com/linux/al2023/ug/hyperv-supported-configurations.html)  |  | 0 | 
|  hypervvssd  |  | 0 | 
|  info  | 6.7 | 6.7 | 
|  inih  | 49 | 49 | 
|  initscripts  | 10,09 | 10,09 | 
|  iproute  | 5.10.0 | 5.10.0 | 
|  iputils  | 20210202 | 20210202 | 
|  irqbalance  | 1.9.0 | 1.9.0 | 
|  jansson  | 2.14 | 2.14 | 
|  jitterentropy  | 3.4.1 | 3.4.1 | 
|  jq  | 1.7.1 | 1.7.1 | 
|  json-c  | 0,14 | 0,14 | 
|  kbd  | 2.4.0 | 2.4.0 | 
|  kbd-misc  | 2.4.0 | 2.4.0 | 
|  kernel  | 61,79 | 6,1,79 | 
|  kernel-livepatch-repo-cdn  |  | 2023,420240319 | 
|  kernel-livepatch-repo-s3  | 2023,420240319 |  | 
|  kernel-modules-extra  |  | 6,1,79 | 
|  kernel-modules-extra-common  |  | 6,1,79 | 
|  kernel-srpm-macros  | 1.0 | 1.0 | 
|  kernel-tools  | 6,1,79 | 6,1,79 | 
|  keyutils  | 1.6.3 | 1.6.3 | 
|  keyutils-libs  | 1.6.3 | 1.6.3 | 
|  kmod  | 29 | 29 | 
|  kmod-libs  | 29 | 29 | 
|  kpatch-runtime  | 0,9,7 | 0,9,7 | 
|  krb5-libs  | 1,21 | 1,21 | 
|  less  | 608 | 608 | 
|  libacl  | 2.3.1 | 2.3.1 | 
|  libaio  | 0,3111 | 0,3111 | 
|  libarchive  | 3,5,3 | 3,5,3 | 
|  libargon2  | 20171227 | 20171227 | 
|  libassuan  | 2,5,5 | 2,5,5 | 
|  libattr  | 2.5.1 | 2.5.1 | 
|  libbasicobjects  | 0,11 | 01.1 | 
|  libblkid  | 2,37,4 | 2,37,4 | 
|  libcap  | 2,48 | 2,48 | 
|  libcap-ng  | 0.8.2 | 0.8.2 | 
|  libcbor  | 0.7.0 | 0.7.0 | 
|  libcollection  | 0.7.0 | 0.7.0 | 
|  libcom\_err  | 1,446,5 | 1,46,5 | 
|  libcomps  | 01,20 | 01,20 | 
|  libconfig  | 17.2 | 1.7.2 | 
|  [https://docs.aws.amazon.com/linux/al2023/ug/compare-with-al2.html#curl-minimal](https://docs.aws.amazon.com/linux/al2023/ug/compare-with-al2.html#curl-minimal)  | 8,5,0 | 8,5,0 | 
|  [https://docs.aws.amazon.com/linux/al2023/ug/deprecated-al2023.html#deprecated-bdb](https://docs.aws.amazon.com/linux/al2023/ug/deprecated-al2023.html#deprecated-bdb)  | 5,3,28 | 5,3,28 | 
|  libdhash  | 0,50 |  | 
|  libdnf  | 0,69,0 | 0,69,0 | 
|  libeconf  | 0,40 | 0,40 | 
|  libedit  | 3.1 | 3.1 | 
|  libev  | 4,33 | 4,33 | 
|  libevent  | 2,1,12 | 2,1,12 | 
|  libfdisk  | 2,37,4 | 2,37,4 | 
|  libffi  | 34.4 | 34.4 | 
|  libfido2  | 1.10.0 | 1.10.0 | 
|  libgcc  | 114,1 | 11.4.1 | 
|  libgcrypt  | 1.10.2 | 1.10.2 | 
|  libgomp  | 11.4.1 | 11.4.1 | 
|  libgpg-error  | 1,42 | 1,42 | 
|  libibverbs  | 48,0 | 48,0 | 
|  libidn2  | 2.3.2 | 2.3.2 | 
|  libini\_config  | 1.3.1 | 1.3.1 | 
|  libkcapi  | 1.4.0 | 1.4.0 | 
|  libkcapi-hmaccalc  | 1.4.0 | 1.4.0 | 
|  libldb  | 26.2 |  | 
|  libmaxminddb  | 1.5.2 | 1.5.2 | 
|  libmetalink  | 0,13 | 0,13 | 
|  libmnl  | 1.0.4 | 1.0.4 | 
|  libmodulemd  | 2.13.0 | 2.13.0 | 
|  libmount  | 2,37,4 | 2,37,4 | 
|  libnfsidmap  | 2,5,4 | 2.5.4 | 
|  libnghttp2  | 1,57,0 | 1,57,0 | 
|  libnl3  | 3.5.0 | 3.5.0 | 
|  libpath\_utils  | 0,2,1 | 0,2,1 | 
|  libpcap  | 1.10.1 | 1.10.1 | 
|  libpipeline  | 1.5.3 | 1.5.3 | 
|  libpkgconf  | 1.8.0 | 1.8.0 | 
|  libpsl  | 0,21,1 | 0,21,1 | 
|  libpwquality  | 1.4.4 | 1.4.4 | 
|  libref\_array  | 0,1,5 | 0,1,5 | 
|  librepo  | 1,14,5 | 1,14,5 | 
|  libreport-filesystem  | 2,15,2 | 2,15,2 | 
|  libseccomp  | 2.5.3 | 2.5.3 | 
|  libselinux  | 3.4 | 3.4 | 
|  libselinux-utils  | 3.4 | 3.4 | 
|  libsemanage  | 3.4 | 3.4 | 
|  libsepol  | 3.4 | 3.4 | 
|  libsigsegv  | 2,13 | 2,13 | 
|  libsmartcols  | 2,37,4 | 2,37,4 | 
|  libsolv  | 0,7,22 | 0,7,22 | 
|  libss  | 1,446,5 | 1,46,5 | 
|  libsss\_certmap  | 2,9,4 |  | 
|  libsss\_idmap  | 2,9,4 | 2,9,4 | 
|  libsss\_nss\_idmap  | 2,9,4 | 2,9,4 | 
|  libsss\_sudo  | 2,9,4 |  | 
|  libstdc\+\+  | 11.4.1 | 11.4.1 | 
|  libstoragemgmt  | 1.9.4 | 1.9.4 | 
|  libtalloc  | 2.3.4 |  | 
|  libtasn1  | 4,19,0 | 4,19,0 | 
|  libtdb  | 1.4.7 |  | 
|  libtevent  | 0.13.0 |  | 
|  libtextstyle  | 0,21 | 0,21 | 
|  libtirpc  | 1.3.3 | 1.3.3 | 
|  libunistring  | 0,9,10 | 0,9,10 | 
|  libuser  | 0,63 | 0,63 | 
|  libutempter  | 1.2.1 | 1.2.1 | 
|  libuuid  | 2,37,4 | 2,37,4 | 
|  libuv  | 1.47.0 | 1.47.0 | 
|  libverto  | 0,32 | 0,32 | 
|  libverto-libev  | 0,32 | 0,32 | 
|  libxcrypt  | 4,4,33 | 4,4,33 | 
|  libxml2  | 2,10,4 | 210.4 | 
|  libyaml  | 02,5 | 02,5 | 
|  libzstd  | 1,5,5 | 1,5,5 | 
|  lm\_sensors-libs  | 3.6.0 | 3.6.0 | 
|  lmdb-libs  | 0,9,29 | 0,9,29 | 
|  logrotate  | 3,20,1 | 3,20,1 | 
|  lsof  | 4,94,0 | 4,94,0 | 
|  lua-libs  | 54.4 | 5.4.4 | 
|  lua-srpm-macros  | 1 | 1 | 
|  lz4-libs  | 1.9.4 | 1.9.4 | 
|  man-db  | 2,9,3 | 29.3 | 
|  man-pages  | 5,10 | 5,10 | 
|  microcode\_ctl  | 2.1 | 2.1 | 
|  mpfr  | 4.1.0 | 4.1.0 | 
|  nano  | 5.8 | 5.8 | 
|  ncurses  | 6.2 | 6.2 | 
|  ncurses-base  | 6.2 | 6.2 | 
|  ncurses-libs  | 6.2 | 6.2 | 
|  nettle  | 3.8 | 3.8 | 
|  net-tools  | 2.0 | 2.0 | 
|  newt  | 0,52,21 | 0,52,21 | 
|  nfs-utils  | 2,5,4 | 2.5.4 | 
|  npth  | 1.6 | 1.6 | 
|  nspr  | 4,35,0 | 4,35,0 | 
|  nss  | 3,90,0 | 3,90,0 | 
|  nss-softokn  | 3,90,0 | 3,90,0 | 
|  nss-softokn-freebl  | 3,90,0 | 3,90,0 | 
|  nss-sysinit  | 3,90,0 | 3,90,0 | 
|  nss-util  | 3,90,0 | 3,90,0 | 
|  ntsysv  | 1.15 | 1.15 | 
|  numactl-libs  | 2.0,14 | 2.0,14 | 
|  ocaml-srpm-macros  | 6 | 6 | 
|  oniguruma  | 6,9,7,1 | 6,9,7,1 | 
|  openblas-srpm-macros  | 2 | 2 | 
|  openldap  | 2,4,57 | 2,4,57 | 
|  openssh  | 8.7p1 | 8,7p1 | 
|  openssh-clients  | 8,7p1 | 8,7p1 | 
|  openssh-server  | 8,7p1 | 8,7p1 | 
|  openssl  | 3,0,8 | 30,8 | 
|  openssl-libs  | 30,8 | 30,8 | 
|  openssl-pkcs11  | 0,4,12 | 0,4,12 | 
|  os-prober  | 1,77 | 1,77 | 
|  p11-kit  | 0,24,1 | 0,24,1 | 
|  p11-kit-trust  | 0,24,1 | 0,24,1 | 
|  package-notes-srpm-macros  | 0.4 | 0.4 | 
|  pam  | 1.5.1 | 1.5.1 | 
|  parted  | 3.4 | 3.4 | 
|  passwd  | 0,80 | 0,80 | 
|  pciutils  | 3.7.0 | 3.7.0 | 
|  pciutils-libs  | 3.7.0 | 3.7.0 | 
|  pcre2  | 10,40 | 10,40 | 
|  pcre2-syntax  | 10,40 | 10,40 | 
|  perl-Carp  | 1,50 | 1,50 | 
|  perl-Class-Struct  | 0,66 | 0,66 | 
|  perl-constant  | 1,33 | 1,33 | 
|  perl-DynaLoader  | 1,47 | 1,47 | 
|  perl-Encode  | 3,15 | 3,15 | 
|  perl-Errno  | 1,30 | 1,30 | 
|  perl-Exporter  | 5,74 | 5,74 | 
|  perl-Fcntl  | 1.13 | 1.13 | 
|  perl-File-Basename  | 2,85 | 2,85 | 
|  perl-File-Path  | 2,18 | 2,18 | 
|  perl-File-stat  | 1,09 | 1,09 | 
|  perl-File-Temp  | 0,231,100 | 0,231,100 | 
|  perl-Getopt-Long  | 2,52 | 2,52 | 
|  perl-Getopt-Std  | 1.12 | 1.12 | 
|  perl-HTTP-Tiny  | 0,078 | 0,078 | 
|  perl-if  | 0,60,800 | 0,60,800 | 
|  perl-interpreter  | 5,32,1 | 5,32,1 | 
|  perl-IO  | 1,43 | 1,43 | 
|  perl-IPC-Open3  | 1,21 | 1,21 | 
|  perl-libs  | 5,32,1 | 5,32,1 | 
|  perl-MIME-Base64  | 3,16 | 3,16 | 
|  perl-mro  | 1,23 | 1,23 | 
|  perl-overload  | 1,31 | 1,31 | 
|  perl-overloading  | 0,02 | 0,02 | 
|  perl-parent  | 0,238 | 0,238 | 
|  perl-PathTools  | 3,78 | 3,78 | 
|  perl-Pod-Escapes  | 1,07 | 1,07 | 
|  perl-podlators  | 4,14 | 4,14 | 
|  perl-Pod-Perldoc  | 3,28,01 | 3,28,01 | 
|  perl-Pod-Simple  | 3,42 | 3,42 | 
|  perl-Pod-Usage  | 2,01 | 2,01 | 
|  perl-POSIX  | 1,94 | 1,94 | 
|  perl-Scalar-List-Utils  | 1,56 | 1,56 | 
|  perl-SelectSaver  | 1.02 | 1.02 | 
|  perl-Socket  | 2,032 | 2,032 | 
|  perl-srpm-macros  | 1 | 1 | 
|  perl-Storable  | 3,21 | 3,21 | 
|  perl-subs  | 1,03 | 1,03 | 
|  perl-Symbol  | 1,08 | 1,08 | 
|  perl-Term-ANSIColor  | 5,01 | 5,01 | 
|  perl-Term-Cap  | 1,17 | 1,17 | 
|  perl-Text-ParseWords  | 3,30 | 3,30 | 
|  perl-Text-Tabs\+Wrap  | 2021,0726 | 2021,0726 | 
|  perl-Time-Local  | 1,300 | 1.300 | 
|  perl-vars  | 1,05 | 1,05 | 
|  pkgconf  | 1.8.0 | 1.8.0 | 
|  pkgconf-m4  | 1.8.0 | 1.8.0 | 
|  pkgconf-pkg-config  | 1.8.0 | 1.8.0 | 
|  policycoreutils  | 3.4 | 3.4 | 
|  policycoreutils-python-utils  | 3.4 |  | 
|  popt  | 1,18 | 1,18 | 
|  procps-ng  | 3,3,17 | 3,3,17 | 
|  protobuf-c  | 1.4.1 | 1.4.1 | 
|  psacct  | 6,6,4 | 6.6.4 | 
|  psmisc  | 23,4 | 23,4 | 
|  publicsuffix-list-dafsa  | 20240212 | 20240212 | 
|  python3  | 3,9,16 | 3,9,16 | 
|  python3-attrs  | 20,3,0 | 20,3,0 | 
|  python3-audit  | 30.6 | 3.0.6 | 
|  python3-awscrt  | 0,19,19 | 0,19,19 | 
|  python3-babel  | 2,9,1 | 29.1 | 
|  python3-cffi  | 1,14,5 | 1,14,5 | 
|  python3-chardet  | 4.0.0 | 4.0.0 | 
|  python3-colorama  | 04.4 | 04.4 | 
|  python3-configobj  | 50.6 | 5.0.6 | 
|  python3-cryptography  | 36,0 | 36,0 | 
|  python3-daemon  | 2.3.0 |  | 
|  python3-dateutil  | 28.1 | 28.1 | 
|  python3-dbus  | 1,2,18 | 1,2,18 | 
|  python3-distro  | 1.5.0 | 1.5.0 | 
|  python3-dnf  | 4.14.0 | 4.14.0 | 
|  python3-dnf-plugins-core  | 4.3.0 | 4.3.0 | 
|  python3-docutils  | 0,16 | 0,16 | 
|  python3-gpg  | 1.15.1 | 1.15.1 | 
|  python3-hawkey  | 0,69,0 | 0,69,0 | 
|  python3-idna  | (2.10) | (2.10) | 
|  python3-jinja2  | 211,3 | 2.11.3 | 
|  python3-jmespath  | 0.10.0 | 0.10.0 | 
|  python3-jsonpatch  | 1,21 | 1,21 | 
|  python3-jsonpointer  | 2.0 | 2.0 | 
|  python3-jsonschema  | 3.2.0 | 3.2.0 | 
|  python3-libcomps  | 01,20 | 01,20 | 
|  python3-libdnf  | 0,69,0 | 0,69,0 | 
|  python3-libs  | 3,9,16 | 3,9,16 | 
|  python3-libselinux  | 3.4 | 3.4 | 
|  python3-libsemanage  | 3.4 | 3.4 | 
|  python3-libstoragemgmt  | 1.9.4 | 1.9.4 | 
|  python3-lockfile  | 0.12.2 |  | 
|  python3-markupsafe  | 1.1.1 | 1.1.1 | 
|  python3-netifaces  | 0,10,6 | 0,10,6 | 
|  python3-oauthlib  | 3.0.2 | 3.0.2 | 
|  python3-pip-wheel  | 21,31 | 21,31 | 
|  python3-ply  | 3,11 | 3,11 | 
|  python3-policycoreutils  | 3.4 | 3.4 | 
|  python3-prettytable  | 0.7.2 | 0.7.2 | 
|  python3-prompt-toolkit  | 3,0,24 | 3,0,24 | 
|  python3-pycparser  | 2,20 | 2,20 | 
|  python3-pyrsistent  | 0,17,3 | 0,17,3 | 
|  python3-pyserial  | 3.4 | 3.4 | 
|  python3-pysocks  | 1.7.1 | 1.7.1 | 
|  python3-pytz  | 2022,7,1 | 2022,7,1 | 
|  python3-pyyaml  | 5.4.1 | 5.4.1 | 
|  python3-requests  | 2,25,1 | 2,25,1 | 
|  python3-rpm  | 4,161,3 | 4,161,3 | 
|  python3-ruamel-yaml  | 0,16,6 | 0,16,6 | 
|  python3-ruamel-yaml-clib  | 0,12 | 0,1,2 | 
|  python3-setools  | 4.4.1 | 4.4.1 | 
|  python3-setuptools  | 59,6,0 | 59,6,0 | 
|  python3-setuptools-wheel  | 59,6,0 | 59,6,0 | 
|  python3-six  | 1.15.0 | 1.15.0 | 
|  python3-systemd  | 235 | 235 | 
|  python3-urllib3  | 1,25,10 | 1,25,10 | 
|  python3-wcwidth  | 0,2,5 | 02,5 | 
|  python-chevron  | 0.13.1 |  | 
|  python-srpm-macros  | 3.9 | 3.9 | 
|  quota  | 4,06 | 4,06 | 
|  quota-nls  | 4,06 | 4,06 | 
|  readline  | 8.1 | 8.1 | 
|  rng-tools  | 6,14 | 6,14 | 
|  rootfiles  | 8.1 | 8.1 | 
|  rpcbind  | 1.2.6 | 1.2.6 | 
|  rpm  | 4,16,13 | 4,161,3 | 
|  rpm-build-libs  | 4,161,3 | 4,161,3 | 
|  rpm-libs  | 4,161,3 | 4,161,3 | 
|  rpm-plugin-selinux  | 4,161,3 | 4,161,3 | 
|  rpm-plugin-systemd-inhibit  | 4,161,3 | 4,161,3 | 
|  rpm-sign-libs  | 4,161,3 | 4,161,3 | 
|  rsync  | 3.2.6 | 3.2.6 | 
|  rust-srpm-macros  | 21 | 21 | 
|  sbsigntools  | 0.9.4 | 0.9.4 | 
|  screen  | 4.8.0 | 4.8.0 | 
|  sed  | 4.8 | 4.8 | 
|  selinux-policy  | 37,22 | 37,22 | 
|  selinux-policy-targeted  | 37,22 | 37,22 | 
|  setup  | 2,13,7 | 2,13,7 | 
|  shadow-utils  | 4.9 | 4.9 | 
|  slang  | 2.3.2 | 2.3.2 | 
|  sqlite-libs  | 3,4,0 | 3,4,0 | 
|  sssd-client  | 2,9,4 | 2,9,4 | 
|  sssd-common  | 2,9,4 |  | 
|  sssd-kcm  | 2,9,4 |  | 
|  sssd-nfs-idmap  | 2,9,4 |  | 
|  strace  | 5,16 | 5,16 | 
|  sudo  | 1,9,14 | 1,9,14 | 
|  sysctl-defaults  | 1.0 | 1.0 | 
|  sysstat  | 12,5,6 | 12,5,6 | 
|  systemd  | 252,16 | 252,16 | 
|  systemd-libs  | 252,16 | 252,16 | 
|  systemd-networkd  | 252,16 | 252,16 | 
|  systemd-pam  | 252,16 | 252,16 | 
|  systemd-resolved  | 252,16 | 252,16 | 
|  systemd-udev  | 252,16 | 252,16 | 
|  system-release  | 2023,420240319 | 2023,420240319 | 
|  systemtap-runtime  | 4,8 | 4.8 | 
|  tar  | 1,34 | 1,34 | 
|  tbb  | 2020,3 | 2020,3 | 
|  tcpdump  | 4,99,1 | 4,99,1 | 
|  tcsh  | 6,24,07 | 6,24,07 | 
|  time  | 1.9 | 1.9 | 
|  traceroute  | 2.1.3 | 2.1.3 | 
|  tzdata  | 2024a | 2024a | 
|  unzip  | 6.0 | 6.0 | 
|  update-motd  | 2.2 | 2.2 | 
|  userspace-rcu  | 0.12.1 | 0.12.1 | 
|  util-linux  | 2,37,4 | 2,37,4 | 
|  util-linux-core  | 2,37,4 | 2,37,4 | 
|  vim-common  | 9,0,2153 | 9,0,2153 | 
|  vim-data  | 9,0,2153 | 9,0,2153 | 
|  vim-enhanced  | 9,0,2153 | 9,0,2153 | 
|  vim-filesystem  | 9,0,2153 | 9,0,2153 | 
|  vim-minimal  | 9,0,2153 | 9,0,2153 | 
|  wget  | 1,21,3 | 1,21,3 | 
|  which  | 2,21 | 2,21 | 
|  words  | 3.0 | 3.0 | 
|  xfsdump  | 3,1,11 | 3,1,11 | 
|  xfsprogs  | 5,18,0 | 5,18,0 | 
|  xxd  | 9,0,2153 | 9,0,2153 | 
|  xxhash-libs  | 0.8.0 | 0.8.0 | 
|  xz  | 52,5 | 5.2.5 | 
|  xz-libs  | 5.2.5 | 5.2.5 | 
|  yum  | 4.14.0 | 4.14.0 | 
|  zip  | 3.0 | 3.0 | 
|  zlib  | 1,2,11 | 1,2,11 | 
|  zram-generator  | 1.1.2 |  | 
|  zram-generator-defaults  | 1.1.2 |  | 
|  zstd  | 1,5,5 | 1,5,5 |