Step J: Add the secondary Conductor Live node
If you have only one Conductor Live, skip this step and go to Step K: Start channels.
Add the secondary node back to the cluster, and then to the redundancy group.
To avoid errors when you're adding the secondary Conductor Live back to the cluster, wait approximately three minutes after the upgrade before performing these steps. This wait ensures that the elemental_se service has restarted and is running.
To add the secondary node to the cluster
-
On the web interface for the primary Conductor Live node, access Cluster > Nodes and choose Add Node.
-
In the Add Nodes to Cluster pop-up, complete the node information for the secondary Conductor Live and choose Add.
When the secondary node is added back to the cluster, add it to the Conductor Live redundancy group.
To add the secondary node to the redundancy group
-
On the web interface for the primary Conductor Live node, access Cluster > Redundancy and select the Conductor Live redundancy group.
-
Choose Add HA Nodes.
-
In the Add pop-up, use the Node drop-down to select the secondary Conductor Live. Choose Add.
When the secondary node is added back to the cluster and redundancy group, you can start the channels, as described in the following section.
