Le traduzioni sono generate tramite traduzione automatica. In caso di conflitto tra il contenuto di una traduzione e la versione originale in Inglese, quest'ultima prevarrà.

Invia un QuEra programma analogico usando Aquila

Questa pagina fornisce una documentazione completa sulle funzionalità della Aquila macchina diQuEra. I dettagli trattati qui sono i seguenti:

hamiltoniano

La Aquila macchina di QuEra simula nativamente il seguente hamiltoniano (dipendente dal tempo):

dove

Gli utenti hanno il controllo sui seguenti parametri tramite lo schema del programma Braket AHS.

Schema del programma Braket AHS

Oggetto Braket.ir.ahs.program_v1.program (esempio)

Program(
    braketSchemaHeader=BraketSchemaHeader(
        name='braket.ir.ahs.program',
        version='1'
    ),
    setup=Setup(
        ahs_register=AtomArrangement(
            sites=[
                [Decimal('0'), Decimal('0')],
                [Decimal('0'), Decimal('4e-6')],
                [Decimal('4e-6'), Decimal('0')]
            ],
            filling=[1, 1, 1]
        )
    ),
    hamiltonian=Hamiltonian(
        drivingFields=[
            DrivingField(
                amplitude=PhysicalField(
                    time_series=TimeSeries(
                        values=[Decimal('0'), Decimal('15700000.0'), Decimal('15700000.0'), Decimal('0')],
                        times=[Decimal('0'), Decimal('0.000001'), Decimal('0.000002'), Decimal('0.000003')]
                    ),
                    pattern='uniform'
                ),
                phase=PhysicalField(
                    time_series=TimeSeries(
                        values=[Decimal('0'), Decimal('0')],
                        times=[Decimal('0'), Decimal('0.000003')]
                    ),
                    pattern='uniform'
                ),
                detuning=PhysicalField(
                    time_series=TimeSeries(
                        values=[Decimal('-54000000.0'), Decimal('54000000.0')],
                        times=[Decimal('0'), Decimal('0.000003')]
                    ),
                    pattern='uniform'
                )
            )
        ],
        localDetuning=[
            LocalDetuning(
                magnitude=PhysicalField(
                    times_series=TimeSeries(
                        values=[Decimal('0'), Decimal('25000000.0'), Decimal('25000000.0'), Decimal('0')],
                        times=[Decimal('0'), Decimal('0.000001'), Decimal('0.000002'), Decimal('0.000003')]
                    ),
                    pattern=Pattern([Decimal('0.8'), Decimal('1.0'), Decimal('0.9')])
                )
            )
        ]
    )
)

JSON (esempio)

{
    "braketSchemaHeader": {
        "name": "braket.ir.ahs.program",
        "version": "1"
    },
    "setup": {
        "ahs_register": {
            "sites": [
                [0E-7, 0E-7], 
                [0E-7, 4E-6],
                [4E-6, 0E-7]
            ],
            "filling": [1, 1, 1]
        }
    },
    "hamiltonian": {
        "drivingFields": [
            {
                "amplitude": {
                    "time_series": {
                        "values": [0.0, 15700000.0, 15700000.0, 0.0],
                        "times": [0E-9, 0.000001000, 0.000002000, 0.000003000]
                    },
                    "pattern": "uniform"
                },
                "phase": {
                    "time_series": {
                        "values": [0E-7, 0E-7],
                        "times": [0E-9, 0.000003000]
                    },
                    "pattern": "uniform"
                },
                "detuning": {
                    "time_series": {
                        "values": [-54000000.0, 54000000.0],
                        "times": [0E-9, 0.000003000]
                    },
                    "pattern": "uniform"
                }
            }
        ],
        "localDetuning": [
            {
                "magnitude": {
                    "time_series": {
                        "values": [0.0, 25000000.0, 25000000.0, 0.0],
                        "times": [0E-9, 0.000001000, 0.000002000, 0.000003000]
                    },
                    "pattern": [0.8, 1.0, 0.9]
                }
            }
        ]
    }
}

schema dei risultati dell'attività Braket AHS

braket.tasks.analog_hamiltonian_simulation_quantum_task_result. AnalogHamiltonianSimulationQuantumTaskResult(esempio)

AnalogHamiltonianSimulationQuantumTaskResult(
    task_metadata=TaskMetadata(
        braketSchemaHeader=BraketSchemaHeader(
            name='braket.task_result.task_metadata',
            version='1'
        ),
        id='arn:aws:braket:us-east-1:123456789012:quantum-task/12345678-90ab-cdef-1234-567890abcdef',
        shots=2,
        deviceId='arn:aws:braket:us-east-1::device/qpu/quera/Aquila',
        deviceParameters=None,
        createdAt='2022-10-25T20:59:10.788Z',
        endedAt='2022-10-25T21:00:58.218Z',
        status='COMPLETED',
        failureReason=None
    ),
    measurements=[
        ShotResult(
            status=<AnalogHamiltonianSimulationShotStatus.SUCCESS: 'Success'>,

            pre_sequence=array([1, 1, 1, 1]),
            post_sequence=array([0, 1, 1, 1])
        ),

        ShotResult(
            status=<AnalogHamiltonianSimulationShotStatus.SUCCESS: 'Success'>,

            pre_sequence=array([1, 1, 0, 1]),
            post_sequence=array([1, 0, 0, 0])
        )
    ]
)

JSON (esempio)

{
    "braketSchemaHeader": {
        "name": "braket.task_result.analog_hamiltonian_simulation_task_result",
        "version": "1"
    },
    "taskMetadata": {
        "braketSchemaHeader": {
            "name": "braket.task_result.task_metadata",
            "version": "1"
        },
        "id": "arn:aws:braket:us-east-1:123456789012:quantum-task/12345678-90ab-cdef-1234-567890abcdef",
        "shots": 2,
        "deviceId": "arn:aws:braket:us-east-1::device/qpu/quera/Aquila",

        "createdAt": "2022-10-25T20:59:10.788Z",
        "endedAt": "2022-10-25T21:00:58.218Z",
        "status": "COMPLETED"

    },
    "measurements": [
        {
            "shotMetadata": {"shotStatus": "Success"},
            "shotResult": {
                "preSequence": [1, 1, 1, 1],
                "postSequence": [0, 1, 1, 1]
            }
        },
        {
            "shotMetadata": {"shotStatus": "Success"},
            "shotResult": {
                "preSequence": [1, 1, 0, 1],
                "postSequence": [1, 0, 0, 0]
            }
        }
    ],
    "additionalMetadata": {
        "action": {...}
        "queraMetadata": {
            "braketSchemaHeader": {
                "name": "braket.task_result.quera_metadata",
                "version": "1"
            },
            "numSuccessfulShots": 100
        }
    }
}

QuEra schema delle proprietà del dispositivo

braket.device_schema.quera.quera_device_capabilities_v1. QueraDeviceCapabilities(esempio)

QueraDeviceCapabilities(
    service=DeviceServiceProperties(
        braketSchemaHeader=BraketSchemaHeader(
            name='braket.device_schema.device_service_properties', 
            version='1'
            ), 
            executionWindows=[
                DeviceExecutionWindow(
                    executionDay=<ExecutionDay.MONDAY: 'Monday'>, 
                    windowStartHour=datetime.time(1, 0), 
                    windowEndHour=datetime.time(23, 59, 59)
                ), 
                DeviceExecutionWindow(
                    executionDay=<ExecutionDay.TUESDAY: 'Tuesday'>, 
                    windowStartHour=datetime.time(0, 0), 
                    windowEndHour=datetime.time(12, 0)
                ), 
                DeviceExecutionWindow(
                    executionDay=<ExecutionDay.WEDNESDAY: 'Wednesday'>, 
                    windowStartHour=datetime.time(0, 0), 
                    windowEndHour=datetime.time(12, 0)
                ), 
                DeviceExecutionWindow(
                    executionDay=<ExecutionDay.FRIDAY: 'Friday'>, 
                    windowStartHour=datetime.time(0, 0), 
                    windowEndHour=datetime.time(23, 59, 59)
                ), 
                DeviceExecutionWindow(
                    executionDay=<ExecutionDay.SATURDAY: 'Saturday'>, 
                    windowStartHour=datetime.time(0, 0), 
                    windowEndHour=datetime.time(23, 59, 59)
                ), 
                DeviceExecutionWindow(
                    executionDay=<ExecutionDay.SUNDAY: 'Sunday'>, 
                    windowStartHour=datetime.time(0, 0), 
                    windowEndHour=datetime.time(12, 0)
                )
            ], 
            shotsRange=(1, 1000), 
            deviceCost=DeviceCost(
                price=0.01, 
                unit='shot'
            ), 
            deviceDocumentation=
                DeviceDocumentation(
                    imageUrl='https://a.b.cdn.console.awsstatic.com/59534b58c709fc239521ef866db9ea3f1aba73ad3ebcf60c23914ad8c5c5c878/a6cfc6fca26cf1c2e1c6.png', 
                    summary='Analog quantum processor based on neutral atom arrays', 
                    externalDocumentationUrl='https://www.quera.com/aquila'
                ), 
                deviceLocation='Boston, USA', 
                updatedAt=datetime.datetime(2024, 1, 22, 12, 0, tzinfo=datetime.timezone.utc), 
                getTaskPollIntervalMillis=None
    ), 
    action={
        <DeviceActionType.AHS: 'braket.ir.ahs.program'>: DeviceActionProperties(
                version=['1'], 
                actionType=<DeviceActionType.AHS: 'braket.ir.ahs.program'>
            )
    }, 
    deviceParameters={}, 
    braketSchemaHeader=BraketSchemaHeader(
        name='braket.device_schema.quera.quera_device_capabilities', 
        version='1'
    ), 
    paradigm=QueraAhsParadigmProperties(
        ...
        # See https://github.com/amazon-braket/amazon-braket-schemas-python/blob/main/src/braket/device_schema/quera/quera_ahs_paradigm_properties_v1.py
        ...
    )  
)

JSON (esempio)

{
    "service": {
        "braketSchemaHeader": {
            "name": "braket.device_schema.device_service_properties",
            "version": "1"
        },
        "executionWindows": [
            {
                "executionDay": "Monday",
                "windowStartHour": "01:00:00",
                "windowEndHour": "23:59:59"
            },
            {
                "executionDay": "Tuesday",
                "windowStartHour": "00:00:00",
                "windowEndHour": "12:00:00"
            },
            {
                "executionDay": "Wednesday",
                "windowStartHour": "00:00:00",
                "windowEndHour": "12:00:00"
            },
            {
                "executionDay": "Friday",
                "windowStartHour": "00:00:00",
                "windowEndHour": "23:59:59"
            },
            {
                "executionDay": "Saturday",
                "windowStartHour": "00:00:00",
                "windowEndHour": "23:59:59"
            },
            {
                "executionDay": "Sunday",
                "windowStartHour": "00:00:00",
                "windowEndHour": "12:00:00"
            }
        ],
        "shotsRange": [
            1,
            1000
        ],
        "deviceCost": {
            "price": 0.01,
            "unit": "shot"
        },
        "deviceDocumentation": {
            "imageUrl": "https://a.b.cdn.console.awsstatic.com/59534b58c709fc239521ef866db9ea3f1aba73ad3ebcf60c23914ad8c5c5c878/a6cfc6fca26cf1c2e1c6.png",
            "summary": "Analog quantum processor based on neutral atom arrays",
            "externalDocumentationUrl": "https://www.quera.com/aquila"
        },
        "deviceLocation": "Boston, USA",
        "updatedAt": "2024-01-22T12:00:00+00:00"
    },
    "action": {
        "braket.ir.ahs.program": {
            "version": [
                "1"
            ],
            "actionType": "braket.ir.ahs.program"
        }
    },
    "deviceParameters": {},
    "braketSchemaHeader": {
        "name": "braket.device_schema.quera.quera_device_capabilities",
        "version": "1"
    },
    "paradigm": {
        ...
        # See Aquila device page > "Calibration" tab > "JSON" page
        ...
    }
}