# Set up open source integrations manually (Windows)
<a name="windows-manual-setup"></a>

Use this guide to manually create a time series bucket for wind speed data that connects with Grafana® and Node-RED®.

 Manually install and configure Node-RED, InfluxDB®, and Grafana on Microsoft Windows to control your deployment configuration. You can store and manage time series data from your devices using InfluxDB.

## Manual setup prerequisites
<a name="windows-open-source-prerequisites"></a>

Before you begin, complete these requirements:

**Note**  
Run all services (SiteWise Edge, InfluxDB, Node-RED, and Grafana) on the same host.
+ Install an MQTT-enabled, V3 gateway. For more information, see [MQTT-enabled, V3 gateways for AWS IoT SiteWise Edge](mqtt-enabled-v3-gateway.md).
+ Install and run these services locally:
  + InfluxDB OSS v2. For installation steps, see [Install InfluxDB](https://docs.influxdata.com/influxdb/v2/install/).
  + Node-RED. For installation steps, see [Install Node-RED locally](https://nodered.org/docs/getting-started/local).
  + Grafana. For installation steps, see [Install Grafana](https://grafana.com/docs/grafana/latest/setup-grafana/installation/).