Terjemahan disediakan oleh mesin penerjemah. Jika konten terjemahan yang diberikan bertentangan dengan versi bahasa Inggris aslinya, utamakan versi bahasa Inggris.

# Mengganti node dalam sebuah cluster
<a name="replacement"></a>

Untuk mengganti node, Anda harus terlebih dahulu memesan pengganti. Anda dapat memesan node pengganti dari konsol, AWS CLI, atau salah satu AWS SDKs. Jika Anda memesan simpul pengganti dari konsol, Anda dapat memesan penggantian untuk tugas apa pun yang belum dibatalkan atau diselesaikan. Kemudian, Anda memisahkan node yang tidak sehat dari cluster, menghubungkan node pengganti ke jaringan Anda dan membuka kluster termasuk node pengganti, mengaitkan node pengganti dengan cluster, dan memulai ulang penyimpanan yang kompatibel dengan Amazon S3 pada layanan Snowball Edge.

**Untuk memesan simpul pengganti dari konsol**

1. Masuk ke [Konsol Manajemen AWS Snow Family](https://console.aws.amazon.com/snowfamily/home).

1. Temukan dan pilih tugas untuk simpul yang dimiliki klaster yang Anda buat dari dasbor Tugas.

1. Untuk **Tindakan**, pilih **Ganti simpul**.

   Dengan melakukan ini akan membuka langkah terakhir dari wizard pembuatan tugas, dengan semua pengaturan identik dengan bagaimana klaster awalnya dibuat.

1. Pilih **Buat tugas**.

Pengganti Snowball Edge Anda sekarang dalam perjalanan ke Anda. Gunakan prosedur berikut untuk menghapus node yang tidak sehat dari cluster.

**Untuk menghapus node dari cluster**

1. Matikan node yang akan dihapus. Untuk informasi lebih lanjut, lihat [Mematikan Snowball Edge](https://docs.aws.amazon.com/snowball/latest/developer-guide/turnitoff.html).

1. Gunakan `describe-cluster` perintah untuk memastikan node yang tidak sehat tidak dapat dijangkau. Ini ditunjukkan oleh nilai `UNREACHABLE` untuk `State` nama `NetworkReachability` objek.

   ```
   snowballEdge describe-cluster --manifest-file path/to/manifest/file.bin --unlock-code unlock-code --endpoint https://ip-address-of-device-in-cluster                
   ```  
**Example dari `describe-cluster` output**  

   ```
   {
       "ClusterId": "CID12345678-1234-1234-1234-123456789012",
       "Devices": [
           {
               "DeviceId": "JID12345678-1234-1234-1234-123456789012",
               "UnlockStatus": {
                   "State": "UNLOCKED"
               },
               "ActiveNetworkInterface": {
                   "IpAddress": "10.0.0.0"
               },
               "ClusterAssociation": {
                   "ClusterId": "CID12345678-1234-1234-1234-123456789012",
                   "State": "ASSOCIATED"
               },
               "NetworkReachability": {
                   "State": "REACHABLE"
               },
               "Tags": []
           },
           {
               "DeviceId": "JID12345678-1234-1234-1234-123456789013",
               "UnlockStatus": {
                   "State": "UNLOCKED"
               },
               "ActiveNetworkInterface": {
                   "IpAddress": "10.0.0.1"
               },
               "ClusterAssociation": {
                   "ClusterId": "CID12345678-1234-1234-1234-123456789012",
                   "State": "ASSOCIATED"
               },
               "NetworkReachability": {
                   "State": "REACHABLE"
               },
               "Tags": []
           },
           {
               "DeviceId": "JID12345678-1234-1234-1234-123456789014",
               "ClusterAssociation": {
                   "ClusterId": "CID12345678-1234-1234-1234-123456789012",
                   "State": "ASSOCIATED"
               },
               "NetworkReachability": {
                   "State": "UNREACHABLE"
               }
           }
       ]
   }
   ```

1. Gunakan `describe-service` perintah untuk memastikan status `s3-snow` layanan`DEGRADED`.

   ```
   snowballEdge describe-service --service-id s3-snow --device-ip-addresses snow-device-1-address snow-device-2-address --manifest-file path/to/manifest/file.bin --unlock-code unlock-code --endpoint https://snow-device-ip-address        
   ```  
**Example output dari `describe-service` perintah**  

   ```
   {
       "ServiceId": "s3-snow",
       "Autostart": true,
       "Status": {
           "State": "DEGRADED"
       },
       "ServiceCapacities": [
           {
               "Name": "S3 Storage",
               "Unit": "Byte",
               "Used": 38768180432,
               "Available": 82961231819568
           }
       ],
       "Endpoints": [
           {
               "Protocol": "https",
               "Port": 443,
               "Host": "10.0.0.10",
               "CertificateAssociation": {
                   "CertificateArn": "arn:aws:snowball-device:::certificate/7Rg2lP9tQaHnW4sC6xUzF1vGyD3jB5kN8MwEiYpT"
               },
               "Description" : "s3-snow bucket API endpoint (for s3control SDK)",
               "DeviceId": "JID-beta-207012320001-24-02-05-17-17-26",
               "Status": {
                   "State": "ACTIVE"
               }
           },
           {
               "Protocol": "https",
               "Port": 443,
               "Host": "10.0.0.11",
               "CertificateAssociation": {
                   "CertificateArn": "arn:aws:snowball-device:::certificate/7Rg2lP9tQaHnW4sC6xUzF1vGyD3jB5kN8MwEiYpT"
               },
               "Description": "Description" : "s3-snow object & bucket API endpoint (for s3api SDK)",
               "DeviceId": "JID-beta-207012320001-24-02-05-17-17-26",
               "Status": {
                   "State": "ACTIVE"
               }
           },
           {
               "Protocol": "https",
               "Port": 443,
               "Host": "10.0.0.12",
               "CertificateAssociation": {
                   "CertificateArn": "arn:aws:snowball-device:::certificate/7Rg2lP9tQaHnW4sC6xUzF1vGyD3jB5kN8MwEiYpT"
               },
               "Description": "Description" : "s3-snow bucket API endpoint (for s3control SDK)",
               "DeviceId": "JID-beta-207012240003-24-02-05-17-17-27",
               "Status": {
                   "State": "ACTIVE"
               }
           },
           {
               "Protocol": "https",
               "Port": 443,
               "Host": "10.0.0.13",
               "CertificateAssociation": {
                   "CertificateArn": "arn:aws:snowball-device:::certificate/7Rg2lP9tQaHnW4sC6xUzF1vGyD3jB5kN8MwEiYpT"
               },
               "Description": "Description" : "s3-snow object & bucket API endpoint (for s3api SDK)",
               "DeviceId": "JID-beta-207012320001-24-02-05-17-17-27",
               "Status": {
                   "State": "ACTIVE"
               }
           }
       ]
   }
   ```

1. Gunakan `disassociate-device` perintah untuk memisahkan dan menghapus node yang tidak sehat dari cluster.

   ```
   snowballEdge disassociate-device --device-id device-id --manifest-file path/to/manifest/file.bin --unlock-code unlock-code --endpoint https://ip-address-of-unhealthy-device                    
   ```  
**Example output dari `disassociate-device` perintah**  

   ```
   Disassociating your Snowball Edge device from the cluster. Your Snowball Edge device will be disassociated from the cluster when it is in the "DISASSOCIATED" state. You can use the describe-cluster command to determine the state of your cluster.                        
   ```

1. Gunakan `describe-cluster` perintah lagi untuk memastikan node yang tidak sehat dipisahkan dari cluster.

   ```
   snowballEdge describe-cluster --manifest-file path/to/manifest/file.bin --unlock-code unlock-code --endpoint https:ip-address-of-healthy-device                    
   ```  
**Example `describe-cluster`perintah yang menunjukkan node terputus**  

   ```
   {
       "ClusterId": "CID12345678-1234-1234-1234-123456789012",
       "Devices": [
           {
               "DeviceId": "JID12345678-1234-1234-1234-123456789012",
               "UnlockStatus": {
                   "State": "UNLOCKED"
               },
               "ActiveNetworkInterface": {
                   "IpAddress": "10.0.0.0"
               },
               "ClusterAssociation": {
                   "ClusterId": "CID12345678-1234-1234-1234-123456789012",
                   "State": "ASSOCIATED"
               },
               "NetworkReachability": {
                   "State": "REACHABLE"
               },
               "Tags": []
           },
           {
               "DeviceId": "JID12345678-1234-1234-1234-123456789013",
               "UnlockStatus": {
                   "State": "UNLOCKED"
               },
               "ActiveNetworkInterface": {
                   "IpAddress": "10.0.0.1"
               },
               "ClusterAssociation": {
                   "ClusterId": "CID12345678-1234-1234-1234-123456789012",
                   "State": "ASSOCIATED"
               },
               "NetworkReachability": {
                   "State": "REACHABLE"
               },
               "Tags": []
           },
           {
               "DeviceId": "JID12345678-1234-1234-1234-123456789014",
               "ClusterAssociation": {
                   "ClusterId": "CID12345678-1234-1234-1234-123456789012",
                   "State": "DISASSOCIATED"
               }
           }
       ]
   }
   ```

1. Matikan dan kembalikan perangkat yang tidak sehat ke AWS. Untuk informasi lebih lanjut, lihat [Mematikan Snowball Edge [dan Mengembalikan Perangkat Snowball](https://docs.aws.amazon.com/snowball/latest/developer-guide/return-device.html)](https://docs.aws.amazon.com/snowball/latest/developer-guide/turnitoff.html) Edge.

Saat perangkat pengganti tiba, gunakan prosedur berikut untuk menambahkannya ke cluster.

**Untuk menambahkan perangkat pengganti**

1. Posisikan perangkat pengganti untuk cluster sehingga Anda memiliki akses ke depan, belakang, dan atas semua perangkat.

1. Nyalakan node dan pastikan node terhubung ke jaringan internal yang sama dengan cluster lainnya. Untuk informasi selengkapnya, lihat [Menyambung ke Jaringan Lokal Anda](https://docs.aws.amazon.com/snowball/latest/developer-guide/getting-started-connect.html).

1. Gunakan `unlock-cluster` perintah dan sertakan alamat IP node baru.

   ```
   snowballEdge unlock-cluster --manifest-file path/to/manifest/file.bin --unlock-code unlock-code --endpoint https://ip-address-of-cluster-device --device-ip-addresses node-1-ip-address node-2-ip-address new-node-ip-address    
   ```

   Status node baru akan `DEGRADED` sampai Anda mengaitkannya dengan cluster di langkah berikutnya.

1. Gunakan `associate-device` perintah untuk mengaitkan node pengganti dengan cluster.

   ```
   snowballEdge associate-device --device-ip-address new-node-ip-address
   ```  
**Example dari output `associate-device` perintah**  

   ```
   Associating your Snowball Edge device with the cluster. Your Snowball Edge device will be associated with the cluster when it is in the ASSOCIATED state. You can use the describe-device command to determine the state of your devices.                        
   ```

1. Gunakan `describe-cluster` perintah untuk memastikan node baru dikaitkan dengan cluster.

   ```
   snowballEdge describe-cluster --manifest-file path/to/manifest/file.bin --unlock-code unlock-code --endpoint https://node-ip-address                    
   ```  
**Example dari output `describe-cluster` perintah**  

   ```
   {
       "ClusterId": "CID12345678-1234-1234-1234-123456789012",
       "Devices": [
           {
               "DeviceId": "JID12345678-1234-1234-1234-123456789012",
               "UnlockStatus": {
                   "State": "UNLOCKED"
               },
               "ActiveNetworkInterface": {
                   "IpAddress": "10.0.0.0"
               },
               "ClusterAssociation": {
                   "ClusterId": "CID12345678-1234-1234-1234-123456789012",
                   "State": "ASSOCIATED"
               },
               "NetworkReachability": {
                   "State": "REACHABLE"
               },
               "Tags": []
           },
           {
               "DeviceId": "JID-CID12345678-1234-1234-1234-123456789013",
               "UnlockStatus": {
                   "State": "UNLOCKED"
               },
               "ActiveNetworkInterface": {
                   "IpAddress": "10.0.0.1"
               },
               "ClusterAssociation": {
                   "ClusterId": "CID12345678-1234-1234-1234-123456789012",
                   "State": "ASSOCIATED"
               },
               "NetworkReachability": {
                   "State": "REACHABLE"
               },
               "Tags": []
           },
           {
               "DeviceId": "JID-CID12345678-1234-1234-1234-123456789015",
               "UnlockStatus": {
                   "State": "UNLOCKED"
               },
               "ActiveNetworkInterface": {
                   "IpAddress": "10.0.0.2"
               },
               "ClusterAssociation": {
                   "ClusterId": "CID12345678-1234-1234-1234-123456789012",
                   "State": "ASSOCIATED"
               },
               "NetworkReachability": {
                   "State": "REACHABLE"
               },
               "Tags": []
           }
       }
   ]
   }
   ```

1. Pada node baru, buat dua antarmuka jaringan virtual (VNIs). Untuk informasi selengkapnya, lihat [Memulai penyimpanan yang kompatibel dengan Amazon S3 pada layanan Snowball Edge](s3-edge-snow-setting-up.md#setting-up-s3-on-snow-cluster)

1. Gunakan `stop-service` perintah untuk menghentikan layanan s3-snow.

   ```
   snowballEdge stop-service --service-id s3-snow --device-ip-addresses cluster-device-1-ip-address cluster-device-2-ip-address cluster-device-3-ip-address --manifest-file path/to/manifest/file.bin --unlock-code unlock-code --endpoint https://snow-device-ip-address                    
   ```  
**Example dari output `stop-service` perintah**  

   ```
   Stopping the AWS service on your Snowball Edge. You can determine the status of the AWS service using the describe-service command.                                            
   ```

1. Gunakan `start-service` perintah untuk memulai layanan s3-snow setelah menambahkan node baru ke cluster.

   ```
   snowballEdge start-service --service-id s3-snow --device-ip-addresses cluster-device-1-ip-address cluster-device-2-ip-address cluster-device-3-ip-address --virtual-network-interface-arns "device-1-vni-ip-address-a" "device-1-vni-ip-address-b" "device-2-vni-ip-address-a" "device-2-vni-ip-address-b" "device-3-vni-ip-address-a" "device-3-vni-ip-address-b" --manifest-file path/to/manifest/file.bin --unlock-code unlock-code --endpoint https://snow-device-ip-address                    
   ```  
**Example dari output `start-service` perintah**  

   ```
   Starting the AWS service on your Snowball Edge. You can determine the status of the AWS service using the describe-service command.                        
   ```

1. Gunakan `describe-service` perintah untuk memastikan layanan s3-snow dimulai.

   ```
   snowballEdge describe-service --service-id s3-snow --device-ip-addresses snow-device-1-address snow-device-2-address snow-device-3-address --manifest-file path/to/manifest/file.bin --unlock-code unlock-code --endpoint https://snow-device-ip-address             
   ```  
**Example dari output `descibe-service` perintah**  

   ```
   {
       "ServiceId": "s3-snow",
       "Autostart": true,
       "Status": {
           "State": "ACTIVE"
       },
       "ServiceCapacities": [{
           "Name": "S3 Storage",
           "Unit": "Byte",
           "Used": 38768180432,
           "Available": 82961231819568
       }],
       "Endpoints": [{
               "Protocol": "https",
               "Port": 443,
               "Host": "10.0.0.10",
               "CertificateAssociation": {
                   "CertificateArn": "arn:aws:snowball-device:::certificate/7Rg2lP9tQaHnW4sC6xUzF1vGyD3jB5kN8MwEiYpT"
               },
               "Description": "s3-snow bucket API endpoint (for s3control SDK)",
               "DeviceId": "JID12345678-1234-1234-1234-123456789012",
               "Status": {
                   "State": "ACTIVE"
               }
           }, {
               "Protocol": "https",
               "Port": 443,
               "Host": "10.0.0.11",
               "CertificateAssociation": {
                   "CertificateArn": "arn:aws:snowball-device:::certificate/7Rg2lP9tQaHnW4sC6xUzF1vGyD3jB5kN8MwEiYpT"
               },
               "Description": "s3-snow object & bucket API endpoint (for s3api SDK)",
               "DeviceId": "JID12345678-1234-1234-1234-123456789013",
               "Status": {
                   "State": "ACTIVE"
               }
           }, {
               "Protocol": "https",
               "Port": 443,
               "Host": "10.0.0.12",
               "CertificateAssociation": {
                   "CertificateArn": "arn:aws:snowball-device:::certificate/7Rg2lP9tQaHnW4sC6xUzF1vGyD3jB5kN8MwEiYpT"
               },
               "Description": "s3-snow bucket API endpoint (for s3control SDK)",
               "DeviceId": "JID12345678-1234-1234-1234-123456789015",
               "Status": {
                   "State": "ACTIVE"
               }
           }, {
               "Protocol": "https",
               "Port": 443,
               "Host": "10.0.0.13",
               "CertificateAssociation": {
                   "CertificateArn": "arn:aws:snowball-device:::certificate/7Rg2lP9tQaHnW4sC6xUzF1vGyD3jB5kN8MwEiYpT"
               },
               "Description": "s3-snow object & bucket API endpoint (for s3api SDK)",
               "DeviceId": "JID-beta-207012320001-24-02-05-17-17-27",
               "Status": {
                   "State": "ACTIVE"
               }
           }, {
               "Protocol": "https",
               "Port": 443,
               "Host": "10.0.0.14",
               "CertificateAssociation": {
                   "CertificateArn": "arn:aws:snowball-device:::certificate/7Rg2lP9tQaHnW4sC6xUzF1vGyD3jB5kN8MwEiYpT"
               },
               "Description": "s3-snow bucket API endpoint (for s3control SDK)",
               "DeviceId": "JID-beta-207012240003-24-02-05-17-17-28",
               "Status": {
                   "State": "ACTIVE"
               }
           }, {
               "Protocol": "https",
               "Port": 443,
               "Host": "10.0.0.15",
               "CertificateAssociation": {
                   "CertificateArn": "arn:aws:snowball-device:::certificate/7Rg2lP9tQaHnW4sC6xUzF1vGyD3jB5kN8MwEiYpT"
               },
               "Description": "s3-snow object & bucket API endpoint (for s3api SDK),
               "DeviceId": "JID-beta-207012320001-24-02-05-17-17-28",
               "Status": {
                   "State": "ACTIVE"
               }
           }
       }]
   }
   ```