Test communications

1. Make sure that your computer and the AWS IoT Greengrass core device are connected to the internet using the same network.

   1. On the AWS IoT Greengrass core device, run the following command to find its IP address.

      hostname -I

   2. On your computer, run the following command using the IP address of the core. You can use Ctrl + C to stop the ping command.

      ping IP-address

      Output similar to the following indicates successful communication between the computer and the AWS IoT Greengrass core device (0% packet loss):

      

      Note

      If you're unable to ping an EC2 instance that's running AWS IoT Greengrass, make sure that the inbound security group rules for the instance allow ICMP traffic for Echo request messages. For more information, see Adding rules to a security group in the Amazon EC2 User Guide.

      On Windows host computers, in the Windows Firewall with Advanced Security app, you might also need to enable an inbound rule that allows inbound echo requests (for example, File and Printer Sharing (Echo Request - ICMPv4-In)), or create one.

2. Get your AWS IoT endpoint.

   1. From the AWS IoT console navigation pane, choose Settings.

   2. Under Device data endpoint, make a note of the value of Endpoint. You use this value to replace the AWS_IOT_ENDPOINT placeholder in the commands in the following steps.

      Note

      Make sure that your endpoints correspond to your certificate type.

3. On your computer (not the AWS IoT Greengrass core device), open two command-line (terminal or command prompt) windows. One window represents the HelloWorld_Publisher client device and the other represents the HelloWorld_Subscriber client device.

   Upon execution, basicDiscovery.py attempts to collect information on the location of the AWS IoT Greengrass core at its endpoints. This information is stored after the client device has discovered and successfully connected to the core. This allows future messaging and operations to be executed locally (without the need for an internet connection).

   Note

   Client IDs used for MQTT connections must match the thing name of the client device. The basicDiscovery.py script sets the client ID for MQTT connections to the thing name that you specify when you run the script.

   Run the following command from the folder that contains the basicDiscovery.py file for detailed script usage information:

   python basicDiscovery.py --help

4. From the HelloWorld_Publisher client device window, run the following commands.

   • Replace path-to-certs-folder with the path to the folder that contains the certificates, keys, and basicDiscovery.py.

   • Replace AWS_IOT_ENDPOINT with your endpoint.

   • Replace the two publisherCertId instances with the certificate ID in the file name for your HelloWorld_Publisher client device.

   cd path-to-certs-folder
   python basicDiscovery.py --endpoint AWS_IOT_ENDPOINT --rootCA AmazonRootCA1.pem --cert publisherCertId-certificate.pem.crt --key publisherCertId-private.pem.key --thingName HelloWorld_Publisher --topic 'hello/world/pubsub' --mode publish --message 'Hello, World! Sent from HelloWorld_Publisher'

   You should see output similar to the following, which includes entries such as Published topic 'hello/world/pubsub': {"message": "Hello, World! Sent from HelloWorld_Publisher", "sequence": 1}.

   Note

   If the script returns an error: unrecognized arguments message, change the single quotation marks to double quotation marks for the --topic and --message parameters and run the command again.

   To troubleshoot a connection issue, you can try using manual IP detection.

   

5. From the HelloWorld_Subscriber client device window, run the following commands.

   • Replace path-to-certs-folder with the path to the folder that contains the certificates, keys, and basicDiscovery.py.

   • Replace AWS_IOT_ENDPOINT with your endpoint.

   • Replace the two subscriberCertId instances with the certificate ID in the file name for your HelloWorld_Subscriber client device.

   cd path-to-certs-folder
   python basicDiscovery.py --endpoint AWS_IOT_ENDPOINT --rootCA AmazonRootCA1.pem --cert subscriberCertId-certificate.pem.crt --key subscriberCertId-private.pem.key --thingName HelloWorld_Subscriber --topic 'hello/world/pubsub' --mode subscribe

   You should see the following output, which includes entries such as Received message on topic hello/world/pubsub: {"message": "Hello, World! Sent from HelloWorld_Publisher", "sequence": 1}.

   

To manually enter the endpoint

1. In the AWS IoT console navigation pane, under Manage, expand Greengrass devices, and then choose Groups (V1).

2. Under Greengrass groups, choose your group.

3. Configure the core to manually manage MQTT broker endpoints. Do the following:

   1. On the group configuration page, choose the Lambda functions tab.

   2. Under System Lambda functions, choose IP detector, and then choose Edit.

   3. In the Edit IP detector settings, choose Manually manage MQTT broker endpoints, and then choose Save.

4. Enter the MQTT broker endpoint for the core. Do the following:

   1. Under Overview, choose the Greengrass core.

   2. Under MQTT broker endpoints, choose Manage endpoints.

   3. Choose Add endpoint and make sure that you have only one endpoint value. This value must be the IP address endpoint for port 8883 of your AWS IoT Greengrass core device (for example, 192.168.1.4).

   4. Choose Update.