Les traductions sont fournies par des outils de traduction automatique. En cas de conflit entre le contenu d'une traduction et celui de la version originale en anglais, la version anglaise prévaudra.
Échantillons de résultats de contrôle
Les exemples suivants fournissent des exemples de résultats du contrôle CSPM ( AWS Security Hub Cloud Security Posture Management) au format ASFF ( AWS Security Finding Format). Le contenu des résultats de contrôle varie selon que vous avez activé ou non les résultats de contrôle consolidés.
Si vous activez les résultats de contrôle consolidés, Security Hub CSPM génère un résultat unique pour un contrôle, même si le contrôle s'applique à plusieurs normes activées. Si vous n'activez pas cette fonctionnalité, Security Hub CSPM génère un résultat de contrôle distinct pour chaque norme activée à laquelle s'applique un contrôle. Par exemple, si vous activez deux normes et qu'un contrôle s'applique aux deux, vous recevez deux résultats distincts pour le contrôle, un pour chaque norme. Si vous activez les résultats de contrôle consolidés, vous ne recevez qu'un seul résultat pour le contrôle. Pour de plus amples informations, veuillez consulter Conclusions de contrôle consolidées.
Les exemples présentés sur cette page fournissent des exemples pour les deux scénarios. Les exemples incluent : les résultats de contrôle pour les différentes normes CSPM de Security Hub lorsque les résultats de contrôle consolidés sont désactivés, et un résultat de contrôle pour plusieurs normes CSPM de Security Hub lorsque les résultats de contrôle consolidés sont activés.
Échantillons de résultats de contrôle
Exemple de recherche pour la norme des meilleures pratiques de sécurité AWS fondamentales
Recherche d'échantillons pour CIS AWS Foundations Benchmark v3.0.0
Recherche d'échantillons pour CIS AWS Foundations Benchmark v1.4.0
Exemple de recherche pour CIS AWS Foundations Benchmark v1.2.0
Recherche d'échantillons pour la norme NIST SP 800-53 Revision 5
Recherche d'échantillons pour la norme NIST SP 800-171 Revision 2
Exemple de recherche pour la norme de balisage AWS des ressources
Recherche d'échantillons pour la norme de AWS Control Tower gestion des services
Note
Les résultats des contrôles font référence à différents champs et valeurs dans les régions de Chine et les AWS GovCloud (US) régions. Pour de plus amples informations, veuillez consulter Impact de la consolidation sur les domaines et les valeurs d'ASFF.
Exemple de recherche pour la norme des meilleures pratiques de sécurité AWS fondamentales
L'exemple suivant fournit un exemple de résultat pour un contrôle qui s'applique à la norme AWS Foundational Security Best Practices (FSBP). Dans cet exemple, les résultats de contrôle consolidés sont désactivés.
{ "SchemaVersion": "2018-10-08", "Id": "arn:aws:securityhub:us-east-2:123456789012:subscription/aws-foundational-security-best-practices/v/1.0.0/CloudTrail.2/finding/a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "ProductArn": "arn:aws:securityhub:us-east-2::product/aws/securityhub", "ProductName": "Security Hub CSPM", "CompanyName": "AWS", "Region": "us-east-2", "GeneratorId": "aws-foundational-security-best-practices/v/1.0.0/CloudTrail.2", "AwsAccountId": "123456789012", "Types": [ "Software and Configuration Checks/Industry and Regulatory Standards/AWS-Foundational-Security-Best-Practices" ], "FirstObservedAt": "2020-08-06T02:18:23.076Z", "LastObservedAt": "2021-09-28T16:10:06.956Z", "CreatedAt": "2020-08-06T02:18:23.076Z", "UpdatedAt": "2021-09-28T16:10:00.093Z", "Severity": { "Product": 40, "Label": "MEDIUM", "Normalized": 40, "Original": "MEDIUM" }, "Title": "CloudTrail.2 CloudTrail should have encryption at-rest enabled", "Description": "This AWS control checks whether AWS CloudTrail is configured to use the server side encryption (SSE) AWS Key Management Service (AWS KMS) customer master key (CMK) encryption. The check will pass if the KmsKeyId is defined.", "Remediation": { "Recommendation": { "Text": "For directions on how to correct this issue, consult the AWS Security Hub Cloud Security Posture Management (CSPM) controls documentation.", "Url": "https://docs.aws.amazon.com/console/securityhub/CloudTrail.2/remediation" } }, "ProductFields": { "StandardsArn": "arn:aws:securityhub:::standards/aws-foundational-security-best-practices/v/1.0.0", "StandardsSubscriptionArn": "arn:aws:securityhub:us-east-2:123456789012:subscription/aws-foundational-security-best-practices/v/1.0.0", "ControlId": "CloudTrail.2", "RecommendationUrl": "https://docs.aws.amazon.com/console/securityhub/CloudTrail.2/remediation", "Related AWS Resources:0/name": "securityhub-cloud-trail-encryption-enabled-fe95bf3f", "Related AWS Resources:0/type": "AWS::Config::ConfigRule", "StandardsControlArn": "arn:aws:securityhub:us-east-2:123456789012:control/aws-foundational-security-best-practices/v/1.0.0/CloudTrail.2", "aws/securityhub/ProductName": "Security Hub CSPM", "aws/securityhub/CompanyName": "AWS", "Resources:0/Id": "arn:aws:cloudtrail:us-east-2:123456789012:trail/AWS MacieTrail-DO-NOT-EDIT", "aws/securityhub/FindingId": "arn:aws:securityhub:us-east-2::product/aws/securityhub/arn:aws:securityhub:us-east-2:123456789012:subscription/aws-foundational-security-best-practices/v/1.0.0/CloudTrail.2/finding/a1b2c3d4-5678-90ab-cdef-EXAMPLE11111" }, "Resources": [ { "Type": "AwsCloudTrailTrail", "Id": "arn:aws:cloudtrail:us-east-2:123456789012:trail/AWS MacieTrail-DO-NOT-EDIT", "Partition": "aws", "Region": "us-east-2" } ], "Compliance": { "Status": "FAILED", "SecurityControlId": "CloudTrail.2", "AssociatedStandards": [{ "StandardsId": "standards/aws-foundation-best-practices/v/1.0.0" }] }, "WorkflowState": "NEW", "Workflow": { "Status": "NEW" }, "RecordState": "ACTIVE", "FindingProviderFields": { "Severity": { "Label": "MEDIUM", "Original": "MEDIUM" }, "Types": [ "Software and Configuration Checks/Industry and Regulatory Standards/AWS-Foundational-Security-Best-Practices" ] } }
Recherche d'échantillons pour CIS AWS Foundations Benchmark v3.0.0
L'exemple suivant fournit un exemple de résultat pour un contrôle qui s'applique à CIS AWS Foundations Benchmark v3.0.0. Dans cet exemple, les résultats de contrôle consolidés sont désactivés.
{ "SchemaVersion": "2018-10-08", "Id": "arn:aws:securityhub:us-east-1:123456789012:subscription/cis-aws-foundations-benchmark/v/3.0.0/2.2.1/finding/38a89798-6819-4fae-861f-9cca8034602c", "ProductArn": "arn:aws:securityhub:us-east-1::product/aws/securityhub", "ProductName": "Security Hub CSPM", "CompanyName": "AWS", "Region": "us-east-1", "GeneratorId": "cis-aws-foundations-benchmark/v/3.0.0/2.2.1", "AwsAccountId": "123456789012", "Types": [ "Software and Configuration Checks/Industry and Regulatory Standards/CIS AWS Foundations Benchmark" ], "FirstObservedAt": "2024-04-18T07:46:18.193Z", "LastObservedAt": "2024-04-23T07:47:01.137Z", "CreatedAt": "2024-04-18T07:46:18.193Z", "UpdatedAt": "2024-04-23T07:46:46.165Z", "Severity": { "Product": 40, "Label": "MEDIUM", "Normalized": 40, "Original": "MEDIUM" }, "Title": "2.2.1 EBS default encryption should be enabled", "Description": "Elastic Compute Cloud (EC2) supports encryption at rest when using the Elastic Block Store (EBS) service. While disabled by default, forcing encryption at EBS volume creation is supported.", "Remediation": { "Recommendation": { "Text": "For information on how to correct this issue, consult the AWS Security Hub Cloud Security Posture Management (CSPM) controls documentation.", "Url": "https://docs.aws.amazon.com/console/securityhub/EC2.7/remediation" } }, "ProductFields": { "StandardsArn": "arn:aws:securityhub:::standards/cis-aws-foundations-benchmark/v/3.0.0", "StandardsSubscriptionArn": "arn:aws:securityhub:us-east-1:123456789012:subscription/cis-aws-foundations-benchmark/v/3.0.0", "ControlId": "2.2.1", "RecommendationUrl": "https://docs.aws.amazon.com/console/securityhub/EC2.7/remediation", "RelatedAWSResources:0/name": "securityhub-ec2-ebs-encryption-by-default-2843ed9e", "RelatedAWSResources:0/type": "AWS::Config::ConfigRule", "StandardsControlArn": "arn:aws:securityhub:us-east-1:123456789012:control/cis-aws-foundations-benchmark/v/3.0.0/2.2.1", "aws/securityhub/ProductName": "Security Hub CSPM", "aws/securityhub/CompanyName": "AWS", "aws/securityhub/annotation": "EBS Encryption by default is not enabled.", "Resources:0/Id": "arn:aws:iam::123456789012:root", "aws/securityhub/FindingId": "arn:aws:securityhub:us-east-1::product/aws/securityhub/arn:aws:securityhub:us-east-1:123456789012:subscription/cis-aws-foundations-benchmark/v/3.0.0/2.2.1/finding/38a89798-6819-4fae-861f-9cca8034602c" }, "Resources": [ { "Type": "AwsAccount", "Id": "AWS::::Account:123456789012", "Partition": "aws", "Region": "us-east-1" } ], "Compliance": { "Status": "FAILED", "RelatedRequirements": [ "CIS AWS Foundations Benchmark v3.0.0/2.2.1" ], "SecurityControlId": "EC2.7", "AssociatedStandards": [ { "StandardsId": "standards/cis-aws-foundations-benchmark/v/3.0.0" } ] }, "WorkflowState": "NEW", "Workflow": { "Status": "NEW" }, "RecordState": "ACTIVE", "FindingProviderFields": { "Severity": { "Label": "MEDIUM", "Original": "MEDIUM" }, "Types": [ "Software and Configuration Checks/Industry and Regulatory Standards/CIS AWS Foundations Benchmark" ] }, "ProcessedAt": "2024-04-23T07:47:07.088Z" }
Recherche d'échantillons pour CIS AWS Foundations Benchmark v1.4.0
L'exemple suivant fournit un exemple de résultat pour un contrôle qui s'applique à CIS AWS Foundations Benchmark v1.4.0. Dans cet exemple, les résultats de contrôle consolidés sont désactivés.
{ "SchemaVersion": "2018-10-08", "Id": "arn:aws:securityhub:us-east-1:123456789012:subscription/cis-aws-foundations-benchmark/v/1.4.0/3.7/finding/a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "ProductArn": "arn:aws:securityhub:us-east-1::product/aws/securityhub", "ProductName": "Security Hub CSPM", "CompanyName": "AWS", "Region": "us-east-1", "GeneratorId": "cis-aws-foundations-benchmark/v/1.4.0/3.7", "AwsAccountId": "123456789012", "Types": [ "Software and Configuration Checks/Industry and Regulatory Standards/CIS AWS Foundations Benchmark" ], "FirstObservedAt": "2022-10-21T22:14:48.913Z", "LastObservedAt": "2022-12-22T22:24:56.980Z", "CreatedAt": "2022-10-21T22:14:48.913Z", "UpdatedAt": "2022-12-22T22:24:52.409Z", "Severity": { "Product": 40, "Label": "MEDIUM", "Normalized": 40, "Original": "MEDIUM" }, "Title": "3.7 Ensure CloudTrail logs are encrypted at rest using KMS CMKs", "Description": "AWS CloudTrail is a web service that records AWS API calls for an account and makes those logs available to users and resources in accordance with IAM policies. AWS Key Management Service (KMS) is a managed service that helps create and control the encryption keys used to encrypt account data, and uses Hardware Security Modules (HSMs) to protect the security of encryption keys. CloudTrail logs can be configured to leverage server side encryption (SSE) and AWS KMS customer created master keys (CMK) to further protect CloudTrail logs. It is recommended that CloudTrail be configured to use SSE-KMS.", "Remediation": { "Recommendation": { "Text": "For directions on how to correct this issue, consult the AWS Security Hub Cloud Security Posture Management (CSPM) controls documentation.", "Url": "https://docs.aws.amazon.com/console/securityhub/CloudTrail.2/remediation" } }, "ProductFields": { "StandardsArn": "arn:aws:securityhub:::standards/cis-aws-foundations-benchmark/v/1.4.0", "StandardsSubscriptionArn": "arn:aws:securityhub:us-east-1:123456789012:subscription/cis-aws-foundations-benchmark/v/1.4.0", "ControlId": "3.7", "RecommendationUrl": "https://docs.aws.amazon.com/console/securityhub/CloudTrail.2/remediation", "RelatedAWSResources:0/name": "securityhub-cloud-trail-encryption-enabled-855f82d1", "RelatedAWSResources:0/type": "AWS::Config::ConfigRule", "StandardsControlArn": "arn:aws:securityhub:us-east-1:123456789012:control/cis-aws-foundations-benchmark/v/1.4.0/3.7", "aws/securityhub/ProductName": "Security Hub CSPM", "aws/securityhub/CompanyName": "AWS", "Resources:0/Id": "arn:aws:cloudtrail:us-west-2:123456789012:trail/AWS MacieTrail-DO-NOT-EDIT", "aws/securityhub/FindingId": "arn:aws:securityhub:us-east-1::product/aws/securityhub/arn:aws:securityhub:us-east-1:123456789012:subscription/cis-aws-foundations-benchmark/v/1.4.0/3.7/finding/a1b2c3d4-5678-90ab-cdef-EXAMPLE11111" }, "Resources": [ { "Type": "AwsCloudTrailTrail", "Id": "arn:aws:cloudtrail:us-west-2:123456789012:trail/AWS MacieTrail-DO-NOT-EDIT", "Partition": "aws", "Region": "us-east-1" } ], "Compliance": { "Status": "FAILED", "RelatedRequirements": [ "CIS AWS Foundations Benchmark v1.4.0/3.7" ], "SecurityControlId": "CloudTrail.2", "AssociatedStandards": [{ "StandardsId": "standards/cis-aws-foundations-benchmark/v/1.4.0" }] }, "WorkflowState": "NEW", "Workflow": { "Status": "NEW" }, "RecordState": "ACTIVE", "FindingProviderFields": { "Severity": { "Label": "MEDIUM", "Original": "MEDIUM" }, "Types": [ "Software and Configuration Checks/Industry and Regulatory Standards/CIS AWS Foundations Benchmark" ] } }
Exemple de recherche pour CIS AWS Foundations Benchmark v1.2.0
L'exemple suivant fournit un exemple de résultat pour un contrôle qui s'applique à CIS AWS Foundations Benchmark v1.2.0. Dans cet exemple, les résultats de contrôle consolidés sont désactivés.
{ "SchemaVersion": "2018-10-08", "Id": "arn:aws:securityhub:us-east-2:123456789012:subscription/cis-aws-foundations-benchmark/v/1.2.0/2.7/finding/a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "ProductArn": "arn:aws:securityhub:us-east-2::product/aws/securityhub", "ProductName": "Security Hub CSPM", "CompanyName": "AWS", "Region": "us-east-2", "GeneratorId": "arn:aws:securityhub:::ruleset/cis-aws-foundations-benchmark/v/1.2.0/rule/2.7", "AwsAccountId": "123456789012", "Types": [ "Software and Configuration Checks/Industry and Regulatory Standards/CIS AWS Foundations Benchmark" ], "FirstObservedAt": "2020-08-29T04:10:06.337Z", "LastObservedAt": "2021-09-28T16:10:05.350Z", "CreatedAt": "2020-08-29T04:10:06.337Z", "UpdatedAt": "2021-09-28T16:10:00.087Z", "Severity": { "Product": 40, "Label": "MEDIUM", "Normalized": 40, "Original": "MEDIUM" }, "Title": "2.7 Ensure CloudTrail logs are encrypted at rest using KMS CMKs", "Description": "AWS Key Management Service (KMS) is a managed service that helps create and control the encryption keys used to encrypt account data, and uses Hardware Security Modules (HSMs) to protect the security of encryption keys. CloudTrail logs can be configured to leverage server side encryption (SSE) and KMS customer created master keys (CMK) to further protect CloudTrail logs. It is recommended that CloudTrail be configured to use SSE-KMS.", "Remediation": { "Recommendation": { "Text": "For directions on how to correct this issue, consult the AWS Security Hub Cloud Security Posture Management (CSPM) controls documentation.", "Url": "https://docs.aws.amazon.com/console/securityhub/CloudTrail.2/remediation" } }, "ProductFields": { "StandardsGuideArn": "arn:aws:securityhub:::ruleset/cis-aws-foundations-benchmark/v/1.2.0", "StandardsGuideSubscriptionArn": "arn:aws:securityhub:us-east-2:123456789012:subscription/cis-aws-foundations-benchmark/v/1.2.0", "RuleId": "2.7", "RecommendationUrl": "https://docs.aws.amazon.com/console/securityhub/CloudTrail.2/remediation", "Related AWS Resources:0/name": "securityhub-cloud-trail-encryption-enabled-fe95bf3f", "Related AWS Resources:0/type": "AWS::Config::ConfigRule", "StandardsControlArn": "arn:aws:securityhub:us-east-2:123456789012:control/cis-aws-foundations-benchmark/v/1.2.0/2.7", "aws/securityhub/ProductName": "Security Hub CSPM", "aws/securityhub/CompanyName": "AWS", "Resources:0/Id": "arn:aws:cloudtrail:us-east-2:123456789012:trail/AWS MacieTrail-DO-NOT-EDIT", "aws/securityhub/FindingId": "arn:aws:securityhub:us-east-2::product/aws/securityhub/arn:aws:securityhub:us-east-2:123456789012:subscription/cis-aws-foundations-benchmark/v/1.2.0/2.7/finding/a1b2c3d4-5678-90ab-cdef-EXAMPLE11111" }, "Resources": [ { "Type": "AwsCloudTrailTrail", "Id": "arn:aws:cloudtrail:us-east-2:123456789012:trail/AWS MacieTrail-DO-NOT-EDIT", "Partition": "aws", "Region": "us-east-2" } ], "Compliance": { "Status": "FAILED", "SecurityControlId": "CloudTrail.2", "AssociatedStandards": [{ "StandardsId": "ruleset/cis-aws-foundations-benchmark/v/1.2.0" }] }, "WorkflowState": "NEW", "Workflow": { "Status": "NEW" }, "RecordState": "ACTIVE", "FindingProviderFields": { "Severity": { "Label": "MEDIUM", "Original": "MEDIUM" }, "Types": [ "Software and Configuration Checks/Industry and Regulatory Standards/CIS AWS Foundations Benchmark" ] } }
Recherche d'échantillons pour la norme NIST SP 800-53 Revision 5
L'exemple suivant fournit un exemple de résultat pour un contrôle qui s'applique à la norme NIST SP 800-53 Revision 5. Dans cet exemple, les résultats de contrôle consolidés sont désactivés.
{ "SchemaVersion": "2018-10-08", "Id": "arn:aws:securityhub:us-east-1:123456789012:subscription/nist-800-53/v/5.0.0/CloudTrail.2/finding/a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "ProductArn": "arn:aws:securityhub:us-east-1::product/aws/securityhub", "ProductName": "Security Hub CSPM", "CompanyName": "AWS", "Region": "us-east-1", "GeneratorId": "nist-800-53/v/5.0.0/CloudTrail.2", "AwsAccountId": "123456789012", "Types": [ "Software and Configuration Checks/Industry and Regulatory Standards" ], "FirstObservedAt": "2023-02-17T14:22:46.726Z", "LastObservedAt": "2023-02-17T14:22:50.846Z", "CreatedAt": "2023-02-17T14:22:46.726Z", "UpdatedAt": "2023-02-17T14:22:46.726Z", "Severity": { "Product": 40, "Label": "MEDIUM", "Normalized": 40, "Original": "MEDIUM" }, "Title": "CloudTrail.2 CloudTrail should have encryption at-rest enabled", "Description": "This AWS control checks whether AWS CloudTrail is configured to use the server side encryption (SSE) AWS Key Management Service (AWS KMS) customer master key (CMK) encryption. The check will pass if the KmsKeyId is defined.", "Remediation": { "Recommendation": { "Text": "For directions on how to fix this issue, consult the AWS Security Hub Cloud Security Posture Management (CSPM) NIST 800-53 R5 documentation.", "Url": "https://docs.aws.amazon.com/console/securityhub/CloudTrail.2/remediation" } }, "ProductFields": { "StandardsArn": "arn:aws:securityhub:::standards/nist-800-53/v/5.0.0", "StandardsSubscriptionArn": "arn:aws:securityhub:us-east-1:123456789012:subscription/nist-800-53/v/5.0.0", "ControlId": "CloudTrail.2", "RecommendationUrl": "https://docs.aws.amazon.com/console/securityhub/CloudTrail.9/remediation", "RelatedAWSResources:0/name": "securityhub-cloud-trail-encryption-enabled-fe95bf3f", "RelatedAWSResources:0/type": "AWS::Config::ConfigRule", "StandardsControlArn": "arn:aws:securityhub:us-east-2:123456789012:control/aws-foundational-security-best-practices/v/1.0.0/CloudTrail.2", "aws/securityhub/ProductName": "Security Hub CSPM", "aws/securityhub/CompanyName": "AWS", "Resources:0/Id": "arn:aws:cloudtrail:us-west-2:123456789012:trail/AWS MacieTrail-DO-NOT-EDIT", "aws/securityhub/FindingId": "arn:aws:securityhub:us-east-1::product/aws/securityhub/arn:aws:securityhub:us-east-1:123456789012:subscription/nist-800-53/v/5.0.0/CloudTrail.2/finding/a1b2c3d4-5678-90ab-cdef-EXAMPLE11111" }, "Resources": [ { "Type": "AwsCloudTrailTrail", "Id": "arn:aws:cloudtrail:us-east-1:123456789012:trail/AWS MacieTrail-DO-NOT-EDIT", "Partition": "aws", "Region": "us-east-1" } ], "Compliance": { "Status": "FAILED", "RelatedRequirements": [ "NIST.800-53.r5 AU-9", "NIST.800-53.r5 CA-9(1)", "NIST.800-53.r5 CM-3(6)", "NIST.800-53.r5 SC-13", "NIST.800-53.r5 SC-28", "NIST.800-53.r5 SC-28(1)", "NIST.800-53.r5 SC-7(10)", "NIST.800-53.r5 SI-7(6)" ], "SecurityControlId": "CloudTrail.2", "AssociatedStandards": [ { "StandardsId": "standards/nist-800-53/v/5.0.0" } ] }, "WorkflowState": "NEW", "Workflow": { "Status": "NEW" }, "RecordState": "ACTIVE", "FindingProviderFields": { "Severity": { "Label": "MEDIUM", "Original": "MEDIUM" }, "Types": [ "Software and Configuration Checks/Industry and Regulatory Standards" ] }, "ProcessedAt": "2023-02-17T14:22:53.572Z" }
Recherche d'échantillons pour la norme NIST SP 800-171 Revision 2
L'exemple suivant fournit un exemple de recherche pour un contrôle qui s'applique à la norme NIST SP 800-171 Revision 2. Dans cet exemple, les résultats de contrôle consolidés sont désactivés.
{ "SchemaVersion": "2018-10-08", "Id": "arn:aws:securityhub:us-east-1:123456789012:subscription/nist-800-171/v/2.0.0/CloudTrail.2/finding/a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "ProductArn": "arn:aws:securityhub:us-east-1::product/aws/securityhub", "ProductName": "Security Hub", "CompanyName": "AWS", "Region": "us-east-1", "GeneratorId": "nist-800-171/v/2.0.0/CloudTrail.2", "AwsAccountId": "123456789012", "AwsAccountName": "TestAcct", "Types": [ "Software and Configuration Checks/Industry and Regulatory Standards" ], "FirstObservedAt": "2025-05-29T05:23:58.690Z", "LastObservedAt": "2025-05-30T05:50:11.898Z", "CreatedAt": "2025-05-29T05:24:24.772Z", "UpdatedAt": "2025-05-30T05:50:34.292Z", "Severity": { "Product": 40, "Label": "MEDIUM", "Normalized": 40, "Original": "MEDIUM" }, "Title": "CloudTrail.2 CloudTrail should have encryption at-rest enabled", "Description": "This AWS control checks whether AWS CloudTrail is configured to use the server side encryption (SSE) AWS Key Management Service (AWS KMS) customer master key (CMK) encryption. The check will pass if the KmsKeyId is defined.", "Remediation": { "Recommendation": { "Text": "For information on how to correct this issue, consult the AWS Security Hub Cloud Security Posture Management (CSPM) controls documentation.", "Url": "https://docs.aws.amazon.com/console/securityhub/CloudTrail.2/remediation" } }, "ProductFields": { "StandardsArn": "arn:aws:securityhub:::standards/nist-800-171/v/2.0.0", "StandardsSubscriptionArn": "arn:aws:securityhub:us-east-1:123456789012:subscription/nist-800-171/v/2.0.0", "ControlId": "CloudTrail.2", "RecommendationUrl": "https://docs.aws.amazon.com/console/securityhub/CloudTrail.2/remediation", "RelatedAWSResources:0/name": "securityhub-cloud-trail-encryption-enabled-0ab1c2d4", "RelatedAWSResources:0/type": "AWS::Config::ConfigRule", "StandardsControlArn": "arn:aws:securityhub:us-east-1:123456789012:control/nist-800-171/v/2.0.0/CloudTrail.2", "aws/securityhub/ProductName": "Security Hub", "aws/securityhub/CompanyName": "AWS", "Resources:0/Id": "arn:aws:cloudtrail:ca-central-1:123456789012:trail/aws-BaselineCloudTrail", "aws/securityhub/FindingId": "arn:aws:securityhub:us-east-1::product/aws/securityhub/arn:aws:securityhub:us-east-1:123456789012:subscription/nist-800-171/v/2.0.0/CloudTrail.2/finding/a1b2c3d4-5678-90ab-cdef-EXAMPLE11111" }, "Resources": [ { "Id": "arn:aws:cloudtrail:ca-central-1:123456789012:trail/aws-BaselineCloudTrail", "Partition": "aws", "Region": "us-east-1", "Type": "AwsCloudTrailTrail" } ], "Compliance": { "Status": "FAILED", "SecurityControlId": "CloudTrail.2", "RelatedRequirements": [ "NIST.800-171.r2/3.3.8" ], "AssociatedStandards": [ { "StandardsId": "standards/nist-800-171/v/2.0.0" } ] }, "Workflow": { "Status": "NEW" }, "WorkflowState": "NEW", "RecordState": "ACTIVE", "FindingProviderFields": { "Types": [ "Software and Configuration Checks/Industry and Regulatory Standards" ], "Severity": { "Product": 40, "Label": "MEDIUM", "Normalized": 40, "Original": "MEDIUM" } }, "ProcessedAt": "2025-05-30T05:50:40.297Z" }
Exemple de recherche pour la norme de sécurité des données de l'industrie des cartes de paiement v3.2.1
L'exemple suivant fournit un exemple de résultat pour un contrôle qui s'applique à la norme de sécurité des données de l'industrie des cartes de paiement (PCI DSS) v3.2.1. Dans cet exemple, les résultats de contrôle consolidés sont désactivés.
{ "SchemaVersion": "2018-10-08", "Id": "arn:aws:securityhub:us-east-2:123456789012:subscription/pci-dss/v/3.2.1/PCI.CloudTrail.1/finding/a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "ProductArn": "arn:aws:securityhub:us-east-2::product/aws/securityhub", "ProductName": "Security Hub CSPM", "CompanyName": "AWS", "Region": "us-east-2", "GeneratorId": "pci-dss/v/3.2.1/PCI.CloudTrail.1", "AwsAccountId": "123456789012", "Types": [ "Software and Configuration Checks/Industry and Regulatory Standards/PCI-DSS" ], "FirstObservedAt": "2020-08-06T02:18:23.089Z", "LastObservedAt": "2021-09-28T16:10:06.942Z", "CreatedAt": "2020-08-06T02:18:23.089Z", "UpdatedAt": "2021-09-28T16:10:00.090Z", "Severity": { "Product": 40, "Label": "MEDIUM", "Normalized": 40, "Original": "MEDIUM" }, "Title": "PCI.CloudTrail.1 CloudTrail logs should be encrypted at rest using AWS KMS CMKs", "Description": "This AWS control checks whether AWS CloudTrail is configured to use the server side encryption (SSE) AWS Key Management Service (AWS KMS) customer master key (CMK) encryption by checking if the KmsKeyId is defined.", "Remediation": { "Recommendation": { "Text": "For directions on how to correct this issue, consult the AWS Security Hub Cloud Security Posture Management (CSPM) controls documentation.", "Url": "https://docs.aws.amazon.com/console/securityhub/CloudTrail.2/remediation" } }, "ProductFields": { "StandardsArn": "arn:aws:securityhub:::standards/pci-dss/v/3.2.1", "StandardsSubscriptionArn": "arn:aws:securityhub:us-east-2:123456789012:subscription/pci-dss/v/3.2.1", "ControlId": "PCI.CloudTrail.1", "RecommendationUrl": "https://docs.aws.amazon.com/console/securityhub/CloudTrail.2/remediation", "Related AWS Resources:0/name": "securityhub-cloud-trail-encryption-enabled-fe95bf3f", "Related AWS Resources:0/type": "AWS::Config::ConfigRule", "StandardsControlArn": "arn:aws:securityhub:us-east-2:123456789012:control/pci-dss/v/3.2.1/PCI.CloudTrail.1", "aws/securityhub/ProductName": "Security Hub CSPM", "aws/securityhub/CompanyName": "AWS", "Resources:0/Id": "arn:aws:cloudtrail:us-east-2:123456789012:trail/AWS MacieTrail-DO-NOT-EDIT", "aws/securityhub/FindingId": "arn:aws:securityhub:us-east-2::product/aws/securityhub/arn:aws:securityhub:us-east-2:123456789012:subscription/pci-dss/v/3.2.1/PCI.CloudTrail.1/finding/a1b2c3d4-5678-90ab-cdef-EXAMPLE11111" }, "Resources": [ { "Type": "AwsCloudTrailTrail", "Id": "arn:aws:cloudtrail:us-east-2:123456789012:trail/AWS MacieTrail-DO-NOT-EDIT", "Partition": "aws", "Region": "us-east-2" } ], "Compliance": { "Status": "FAILED", "RelatedRequirements": [ "PCI DSS 3.4" ], "SecurityControlId": "CloudTrail.2", "AssociatedStandards": [{ "StandardsId": "standards/pci-dss/v/3.2.1" }] }, "WorkflowState": "NEW", "Workflow": { "Status": "NEW" }, "RecordState": "ACTIVE", "FindingProviderFields": { "Severity": { "Label": "MEDIUM", "Original": "MEDIUM" }, "Types": [ "Software and Configuration Checks/Industry and Regulatory Standards/PCI-DSS" ] } }
Exemple de recherche pour la norme de balisage AWS des ressources
L'exemple suivant fournit un exemple de résultat pour un contrôle qui s'applique à la norme AWS Resource Tagging. Dans cet exemple, les résultats de contrôle consolidés sont désactivés.
{ "SchemaVersion": "2018-10-08", "Id": "arn:aws:securityhub:eu-central-1:123456789012:security-control/EC2.44/finding/a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "ProductArn": "arn:aws:securityhub:eu-central-1::product/aws/securityhub", "ProductName": "Security Hub CSPM", "CompanyName": "AWS", "Region": "eu-central-1", "GeneratorId": "security-control/EC2.44", "AwsAccountId": "123456789012", "Types": [ "Software and Configuration Checks/Industry and Regulatory Standards" ], "FirstObservedAt": "2024-02-19T21:00:32.206Z", "LastObservedAt": "2024-04-29T13:01:57.861Z", "CreatedAt": "2024-02-19T21:00:32.206Z", "UpdatedAt": "2024-04-29T13:01:41.242Z", "Severity": { "Label": "LOW", "Normalized": 1, "Original": "LOW" }, "Title": "EC2 subnets should be tagged", "Description": "This control checks whether an Amazon EC2 subnet has tags with the specific keys defined in the parameter requiredTagKeys. The control fails if the subnet doesn't have any tag keys or if it doesn't have all the keys specified in the parameter requiredTagKeys. If the parameter requiredTagKeys isn't provided, the control only checks for the existence of a tag key and fails if the subnet isn't tagged with any key. System tags, which are automatically applied and begin with aws:, are ignored.", "Remediation": { "Recommendation": { "Text": "For information on how to correct this issue, consult the AWS Security Hub Cloud Security Posture Management (CSPM) controls documentation.", "Url": "https://docs.aws.amazon.com/console/securityhub/EC2.44/remediation" } }, "ProductFields": { "RelatedAWSResources:0/name": "securityhub-tagged-ec2-subnet-6ceafede", "RelatedAWSResources:0/type": "AWS::Config::ConfigRule", "aws/securityhub/ProductName": "Security Hub CSPM", "aws/securityhub/CompanyName": "AWS", "aws/securityhub/annotation": "No tags are present.", "Resources:0/Id": "arn:aws:ec2:eu-central-1:123456789012:subnet/subnet-1234567890abcdef0", "aws/securityhub/FindingId": "arn:aws:securityhub:eu-central-1::product/aws/securityhub/arn:aws:securityhub:eu-central-1:123456789012:security-control/EC2.44/finding/a1b2c3d4-5678-90ab-cdef-EXAMPLE11111" }, "Resources": [ { "Type": "AwsEc2Subnet", "Id": "arn:aws:ec2:eu-central-1:123456789012:subnet/subnet-1234567890abcdef0", "Partition": "aws", "Region": "eu-central-1", "Details": { "AwsEc2Subnet": { "AssignIpv6AddressOnCreation": false, "AvailabilityZone": "eu-central-1b", "AvailabilityZoneId": "euc1-az3", "AvailableIpAddressCount": 4091, "CidrBlock": "10.24.34.0/23", "DefaultForAz": true, "MapPublicIpOnLaunch": true, "OwnerId": "123456789012", "State": "available", "SubnetArn": "arn:aws:ec2:eu-central-1:123456789012:subnet/subnet-1234567890abcdef0", "SubnetId": "subnet-1234567890abcdef0", "VpcId": "vpc-021345abcdef6789" } } } ], "Compliance": { "Status": "FAILED", "SecurityControlId": "EC2.44", "AssociatedStandards": [ { "StandardsId": "standards/aws-resource-tagging-standard/v/1.0.0" } ], "SecurityControlParameters": [ { "Name": "requiredTagKeys", "Value": [ "peepoo" ] } ], }, "WorkflowState": "NEW", "Workflow": { "Status": "NEW" }, "RecordState": "ACTIVE", "FindingProviderFields": { "Severity": { "Label": "LOW", "Original": "LOW" }, "Types": [ "Software and Configuration Checks/Industry and Regulatory Standards" ] }, "ProcessedAt": "2024-04-29T13:02:03.259Z" }
Recherche d'échantillons pour la norme de AWS Control Tower gestion des services
L'exemple suivant fournit un exemple de résultat pour un contrôle qui s'applique à la norme de AWS Control Tower gestion des services. Dans cet exemple, les résultats de contrôle consolidés sont désactivés.
{ "SchemaVersion": "2018-10-08", "Id": "arn:aws:securityhub:us-east-1:123456789012:subscription/service-managed-aws-control-tower/v/1.0.0/CloudTrail.2/finding/a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "ProductArn": "arn:aws:securityhub:us-east-1::product/aws/securityhub", "ProductName": "Security Hub CSPM", "CompanyName": "AWS", "Region": "us-east-1", "GeneratorId": "service-managed-aws-control-tower/v/1.0.0/CloudTrail.2", "AwsAccountId": "123456789012", "Types": [ "Software and Configuration Checks/Industry and Regulatory Standards" ], "FirstObservedAt": "2022-11-17T01:25:30.296Z", "LastObservedAt": "2022-11-17T01:25:45.805Z", "CreatedAt": "2022-11-17T01:25:30.296Z", "UpdatedAt": "2022-11-17T01:25:30.296Z", "Severity": { "Product": 40, "Label": "MEDIUM", "Normalized": 40, "Original": "MEDIUM" }, "Title": "CT.CloudTrail.2 CloudTrail should have encryption at-rest enabled", "Description": "This AWS control checks whether AWS CloudTrail is configured to use the server side encryption (SSE) AWS Key Management Service (AWS KMS) customer master key (CMK) encryption. The check will pass if the KmsKeyId is defined.", "Remediation": { "Recommendation": { "Text": "For information on how to correct this issue, consult the AWS Security Hub Cloud Security Posture Management (CSPM) controls documentation.", "Url": "https://docs.aws.amazon.com/console/securityhub/CloudTrail.2/remediation" } }, "ProductFields": { "StandardsArn": "arn:aws:securityhub:::standards/service-managed-aws-control-tower/v/1.0.0", "StandardsSubscriptionArn": "arn:aws:securityhub:us-east-1:123456789012:subscription/service-managed-aws-control-tower/v/1.0.0", "ControlId": "CT.CloudTrail.2", "RecommendationUrl": "https://docs.aws.amazon.com/console/securityhub/CloudTrail.2/remediation", "RelatedAWSResources:0/name": "securityhub-cloud-trail-encryption-enabled-fe95bf3f", "RelatedAWSResources:0/type": "AWS::Config::ConfigRule", "StandardsControlArn": "arn:aws:securityhub:us-east-1:123456789012:control/service-managed-aws-control-tower/v/1.0.0/CloudTrail.2", "aws/securityhub/ProductName": "Security Hub CSPM", "aws/securityhub/CompanyName": "AWS", "Resources:0/Id": "arn:aws:cloudtrail:us-east-2:123456789012:trail/AWSMacieTrail-DO-NOT-EDIT", "aws/securityhub/FindingId": "arn:aws:securityhub:us-east-1::product/aws/securityhub/arn:aws:securityhub:us-east-1:123456789012:subscription/service-managed-aws-control-tower/v/1.0.0/CloudTrail.2/finding/a1b2c3d4-5678-90ab-cdef-EXAMPLE11111" }, "Resources": [ { "Type": "AwsAccount", "Id": "AWS::::Account:123456789012", "Partition": "aws", "Region": "us-east-1" } ], "Compliance": { "Status": "FAILED", "SecurityControlId": "CloudTrail.2", "AssociatedStandards": [{ "StandardsId": "standards/service-managed-aws-control-tower/v/1.0.0" }] }, "WorkflowState": "NEW", "Workflow": { "Status": "NEW" }, "RecordState": "ACTIVE", "FindingProviderFields": { "Severity": { "Label": "MEDIUM", "Original": "MEDIUM" }, "Types": [ "Software and Configuration Checks/Industry and Regulatory Standards" ] } }
Exemple de résultats consolidés pour plusieurs normes
L'exemple suivant fournit un exemple de résultat pour un contrôle qui s'applique à plusieurs normes activées. Dans cet exemple, les résultats de contrôle consolidés sont activés.
{ "SchemaVersion": "2018-10-08", "Id": "arn:aws:securityhub:us-east-1:123456789012:security-control/CloudTrail.2/finding/a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "ProductArn": "arn:aws:securityhub:us-east-1::product/aws/securityhub", "ProductName": "Security Hub", "CompanyName": "AWS", "Region": "us-east-1", "GeneratorId": "security-control/CloudTrail.2", "AwsAccountId": "123456789012", "Types": [ "Software and Configuration Checks/Industry and Regulatory Standards" ], "FirstObservedAt": "2024-08-09T14:57:04.521Z", "LastObservedAt": "2025-05-30T03:30:17.407Z", "CreatedAt": "2024-08-09T14:57:04.521Z", "UpdatedAt": "2025-05-30T03:30:32.781Z", "Severity": { "Label": "MEDIUM", "Normalized": 40, "Original": "MEDIUM" }, "Title": "CloudTrail should have encryption at-rest enabled", "Description": "This AWS control checks whether AWS CloudTrail is configured to use the server side encryption (SSE) AWS Key Management Service (AWS KMS) customer master key (CMK) encryption. The check will pass if the KmsKeyId is defined.", "Remediation": { "Recommendation": { "Text": "For information on how to correct this issue, consult the AWS Security Hub Cloud Security Posture Management (CSPM) controls documentation.", "Url": "https://docs.aws.amazon.com/console/securityhub/CloudTrail.2/remediation" } }, "ProductFields": { "RelatedAWSResources:0/name": "securityhub-cloud-trail-encryption-enabled-01a2b345", "RelatedAWSResources:0/type": "AWS::Config::ConfigRule", "aws/securityhub/ProductName": "Security Hub", "aws/securityhub/CompanyName": "AWS", "Resources:0/Id": "arn:aws:cloudtrail:us-east-1:123456789012:trail/TestTrail-DO-NOT-DELETE", "aws/securityhub/FindingId": "arn:aws:securityhub:us-east-1::product/aws/securityhub/arn:aws:securityhub:us-east-1:123456789012:security-control/CloudTrail.2/finding/a1b2c3d4-5678-90ab-cdef-EXAMPLE11111" }, "Resources": [ { "Type": "AwsCloudTrailTrail", "Id": "arn:aws:cloudtrail:us-east-1:123456789012:trail/TestTrail-DO-NOT-DELETE", "Partition": "aws", "Region": "us-east-1", "Details": { "AwsCloudTrailTrail": { "HasCustomEventSelectors": false, "IncludeGlobalServiceEvents": true, "LogFileValidationEnabled": true, "HomeRegion": "us-east-1", "IsMultiRegionTrail": true, "S3BucketName": "cloudtrail-awslogs-do-not-delete", "IsOrganizationTrail": false, "Name": "TestTrail-DO-NOT-DELETE" } } } ], "Compliance": { "Status": "FAILED", "SecurityControlId": "CloudTrail.2", "RelatedRequirements": [ "CIS AWS Foundations Benchmark v1.2.0/2.7", "CIS AWS Foundations Benchmark v1.4.0/3.7", "CIS AWS Foundations Benchmark v3.0.0/3.5", "NIST.800-171.r2/3.3.8", "PCI DSS v3.2.1/3.4", "PCI DSS v4.0.1/10.3.2" ], "AssociatedStandards": [ { "StandardsId": "ruleset/cis-aws-foundations-benchmark/v/1.2.0"}, { "StandardsId": "standards/aws-foundational-security-best-practices/v/1.0.0"}, { "StandardsId": "standards/cis-aws-foundations-benchmark/v/1.4.0"}, { "StandardsId": "standards/cis-aws-foundations-benchmark/v/3.0.0"}, { "StandardsId": "standards/nist-800-171/v/2.0.0"}, { "StandardsId": "standards/pci-dss/v/3.2.1"}, { "StandardsId": "standards/pci-dss/v/4.0.1"} ] }, "Workflow": { "Status": "NEW" }, "WorkflowState": "NEW", "RecordState": "ACTIVE", "FindingProviderFields": { "Types": [ "Software and Configuration Checks/Industry and Regulatory Standards" ], "Severity": { "Normalized": 40, "Label": "MEDIUM", "Original": "MEDIUM" } }, "ProcessedAt": "2025-05-30T03:31:00.831Z" }