Supprimer un cluster

Pour supprimer un cluster en un seul Région AWS, utilisez l'exemple suivant.

import boto3


def delete_cluster(region, identifier):
    try:
        client = boto3.client("dsql", region_name=region)
        cluster = client.delete_cluster(identifier=identifier)
        print(f"Initiated delete of {cluster["arn"]}")

        print("Waiting for cluster to finish deletion")
        client.get_waiter("cluster_not_exists").wait(
            identifier=cluster["identifier"],
            WaiterConfig={
                'Delay': 10,
                'MaxAttempts': 30
            }
        )
    except:
        print("Unable to delete cluster " + identifier)
        raise


def main():
    region = "us-east-1"
    cluster_id = "<cluster id>"  # Use a placeholder in docs
    delete_cluster(region, cluster_id)
    print(f"Deleted {cluster_id}")


if __name__ == "__main__":
    main()
                

Pour supprimer un cluster multirégional, utilisez l'exemple suivant.

import boto3


def delete_multi_region_clusters(region_1, cluster_id_1, region_2, cluster_id_2):
    try:

        client_1 = boto3.client("dsql", region_name=region_1)
        client_2 = boto3.client("dsql", region_name=region_2)

        client_1.delete_cluster(identifier=cluster_id_1)
        print(f"Deleting cluster {cluster_id_1} in {region_1}")

        # cluster_1 will stay in PENDING_DELETE state until cluster_2 is deleted

        client_2.delete_cluster(identifier=cluster_id_2)
        print(f"Deleting cluster {cluster_id_2} in {region_2}")

        # Now that both clusters have been marked for deletion they will transition
        # to DELETING state and finalize deletion
        print(f"Waiting for {cluster_id_1} to finish deletion")
        client_1.get_waiter("cluster_not_exists").wait(
            identifier=cluster_id_1,
            WaiterConfig={
                'Delay': 10,
                'MaxAttempts': 30
            }
        )

        print(f"Waiting for {cluster_id_2} to finish deletion")
        client_2.get_waiter("cluster_not_exists").wait(
            identifier=cluster_id_2,
            WaiterConfig={
                'Delay': 10,
                'MaxAttempts': 30
            }
        )

    except:
        print("Unable to delete cluster")
        raise


def main():
    region_1 = "us-east-1"
    cluster_id_1 = "<cluster 1 id>"
    region_2 = "us-east-2"
    cluster_id_2 = "<cluster 2 id>"

    delete_multi_region_clusters(region_1, cluster_id_1, region_2, cluster_id_2)
    print(f"Deleted {cluster_id_1} in {region_1} and {cluster_id_2} in {region_2}")


if __name__ == "__main__":
    main()           

Pour supprimer un cluster en un seul Région AWS, utilisez l'exemple suivant.

#include <aws/core/Aws.h>
#include <aws/core/utils/Outcome.h>
#include <aws/dsql/DSQLClient.h>
#include <aws/dsql/model/DeleteClusterRequest.h>
#include <aws/dsql/model/GetClusterRequest.h>
#include <iostream>
#include <thread>
#include <chrono>

using namespace Aws;
using namespace Aws::DSQL;
using namespace Aws::DSQL::Model;

/**
 * Deletes a single-region cluster in Amazon Aurora DSQL
 */
void DeleteCluster(const Aws::String& region, const Aws::String& identifier) {
    // Create client for the specified region
    DSQL::DSQLClientConfiguration clientConfig;
    clientConfig.region = region;
    DSQL::DSQLClient client(clientConfig);
    
    // Delete the cluster
    DeleteClusterRequest deleteRequest;
    deleteRequest.SetIdentifier(identifier);
    deleteRequest.SetClientToken(Aws::Utils::UUID::RandomUUID()); 
    
    auto deleteOutcome = client.DeleteCluster(deleteRequest);
    if (!deleteOutcome.IsSuccess()) {
        std::cerr << "Failed to delete cluster " << identifier << " in " << region << ": " 
                  << deleteOutcome.GetError().GetMessage() << std::endl;
        throw std::runtime_error("Unable to delete cluster " + identifier + " in " + region);
    }
    
    auto cluster = deleteOutcome.GetResult();
    std::cout << "Initiated delete of " << cluster.GetArn() << std::endl;
}

int main() {
    Aws::SDKOptions options;
    Aws::InitAPI(options);
    {
        try {
            // Define region and cluster ID
            Aws::String region = "us-east-1";
            Aws::String clusterId = "<your cluster id>";
            
            DeleteCluster(region, clusterId);
            
            std::cout << "Deleted " << clusterId << std::endl;
        }
        catch (const std::exception& e) {
            std::cerr << "Error: " << e.what() << std::endl;
        }
    }
    Aws::ShutdownAPI(options);
    return 0;
}            

Pour supprimer un cluster multirégional, utilisez l'exemple suivant. La suppression d'un cluster multirégional peut prendre un certain temps.

#include <aws/core/Aws.h>
#include <aws/core/utils/Outcome.h>
#include <aws/dsql/DSQLClient.h>
#include <aws/dsql/model/DeleteClusterRequest.h>
#include <aws/dsql/model/GetClusterRequest.h>
#include <iostream>
#include <thread>
#include <chrono>

using namespace Aws;
using namespace Aws::DSQL;
using namespace Aws::DSQL::Model;

/**
 * Deletes multi-region clusters in Amazon Aurora DSQL
 */
void DeleteMultiRegionClusters(
    const Aws::String& region1,
    const Aws::String& clusterId1,
    const Aws::String& region2,
    const Aws::String& clusterId2) {
    
    // Create clients for each region
    DSQL::DSQLClientConfiguration clientConfig1;
    clientConfig1.region = region1;
    DSQL::DSQLClient client1(clientConfig1);
    
    DSQL::DSQLClientConfiguration clientConfig2;
    clientConfig2.region = region2;
    DSQL::DSQLClient client2(clientConfig2);
    
    // Delete the first cluster
    std::cout << "Deleting cluster " << clusterId1 << " in " << region1 << std::endl;
    
    DeleteClusterRequest deleteRequest1;
    deleteRequest1.SetIdentifier(clusterId1);
    deleteRequest1.SetClientToken(Aws::Utils::UUID::RandomUUID()); 
    
    auto deleteOutcome1 = client1.DeleteCluster(deleteRequest1);
    if (!deleteOutcome1.IsSuccess()) {
        std::cerr << "Failed to delete cluster " << clusterId1 << " in " << region1 << ": " 
                  << deleteOutcome1.GetError().GetMessage() << std::endl;
        throw std::runtime_error("Failed to delete multi-region clusters");
    }
    
    // cluster1 will stay in PENDING_DELETE state until cluster2 is deleted
    std::cout << "Deleting cluster " << clusterId2 << " in " << region2 << std::endl;
    
    DeleteClusterRequest deleteRequest2;
    deleteRequest2.SetIdentifier(clusterId2);
    deleteRequest2.SetClientToken(Aws::Utils::UUID::RandomUUID()); 
    
    auto deleteOutcome2 = client2.DeleteCluster(deleteRequest2);
    if (!deleteOutcome2.IsSuccess()) {
        std::cerr << "Failed to delete cluster " << clusterId2 << " in " << region2 << ": " 
                  << deleteOutcome2.GetError().GetMessage() << std::endl;
        throw std::runtime_error("Failed to delete multi-region clusters");
    }
}

int main() {
    Aws::SDKOptions options;
    Aws::InitAPI(options);
    {
        try {
            Aws::String region1 = "us-east-1";
            Aws::String clusterId1 = "<your cluster id 1>";
            Aws::String region2 = "us-east-2";
            Aws::String clusterId2 = "<your cluster id 2>";
            
            DeleteMultiRegionClusters(region1, clusterId1, region2, clusterId2);
            
            std::cout << "Deleted " << clusterId1 << " in " << region1 
                      << " and " << clusterId2 << " in " << region2 << std::endl;
        }
        catch (const std::exception& e) {
            std::cerr << "Error: " << e.what() << std::endl;
        }
    }
    Aws::ShutdownAPI(options);
    return 0;
}               

Pour supprimer un cluster en un seul Région AWS, utilisez l'exemple suivant.

import { DSQLClient, DeleteClusterCommand, waitUntilClusterNotExists } from "@aws-sdk/client-dsql";

async function deleteCluster(region, clusterId) {

  const client = new DSQLClient({ region });

  try {
    const deleteClusterCommand = new DeleteClusterCommand({
      identifier: clusterId,
    });
    const response = await client.send(deleteClusterCommand);

    console.log(`Waiting for cluster ${response.identifier} to finish deletion`);

    await waitUntilClusterNotExists(
      {
        client: client,
        maxWaitTime: 300 // Wait for 5 minutes
      },
      {
        identifier: response.identifier
      }
    );
    console.log(`Cluster Id ${response.identifier} is now deleted`);
    return;
  } catch (error) {
    if (error.name === "ResourceNotFoundException") {
      console.log("Cluster ID not found or already deleted");
    } else {
      console.error("Unable to delete cluster: ", error.message);
    }
    throw error;
  }
}

async function main() {
  const region = "us-east-1";
  const clusterId = "<CLUSTER_ID>";

  await deleteCluster(region, clusterId);
}

main();        

Pour supprimer un cluster multirégional, utilisez l'exemple suivant. La suppression d'un cluster multirégional peut prendre un certain temps.

import { DSQLClient, DeleteClusterCommand, waitUntilClusterNotExists } from "@aws-sdk/client-dsql";

async function deleteMultiRegionClusters(region1, cluster1_id, region2, cluster2_id) {

    const client1 = new DSQLClient({ region: region1 });
    const client2 = new DSQLClient({ region: region2 });

    try {
        const deleteClusterCommand1 = new DeleteClusterCommand({
            identifier: cluster1_id,
        });
        const response1 = await client1.send(deleteClusterCommand1);

        const deleteClusterCommand2 = new DeleteClusterCommand({
            identifier: cluster2_id,
        });
        const response2 = await client2.send(deleteClusterCommand2);

        console.log(`Waiting for cluster1 ${response1.identifier} to finish deletion`);
        await waitUntilClusterNotExists(
            {
                client: client1,
                maxWaitTime: 300 // Wait for 5 minutes
            },
            {
                identifier: response1.identifier
            }
        );
        console.log(`Cluster1 Id ${response1.identifier} is now deleted`);

        console.log(`Waiting for cluster2 ${response2.identifier} to finish deletion`);
        await waitUntilClusterNotExists(
            {
                client: client2,
                maxWaitTime: 300 // Wait for 5 minutes
            },
            {
                identifier: response2.identifier
            }
        );
        console.log(`Cluster2 Id ${response2.identifier} is now deleted`);
        return;
    } catch (error) {
        if (error.name === "ResourceNotFoundException") {
            console.log("Some or all Cluster ARNs not found or already deleted");
        } else {
            console.error("Unable to delete multi-region clusters: ", error.message);
        }
        throw error;
    }
}

async function main() {
    const region1 = "us-east-1";
    const cluster1_id = "<CLUSTER_ID_1>";
    const region2 = "us-east-2";
    const cluster2_id = "<CLUSTER_ID_2>";

    const response = await deleteMultiRegionClusters(region1, cluster1_id, region2, cluster2_id);
    console.log(`Deleted ${cluster1_id} in ${region1} and ${cluster2_id} in ${region2}`);
}

main();       

Pour supprimer un cluster en un seul Région AWS, utilisez l'exemple suivant.

package org.example;

import software.amazon.awssdk.auth.credentials.DefaultCredentialsProvider;
import software.amazon.awssdk.regions.Region;
import software.amazon.awssdk.retries.api.BackoffStrategy;
import software.amazon.awssdk.services.dsql.DsqlClient;
import software.amazon.awssdk.services.dsql.model.DeleteClusterResponse;
import software.amazon.awssdk.services.dsql.model.ResourceNotFoundException;

import java.time.Duration;

public class DeleteCluster {

    public static void main(String[] args) {
        Region region = Region.US_EAST_1;
        String clusterId = "<your cluster id>";


        try (
            DsqlClient client = DsqlClient.builder()
                    .region(region)
                    .credentialsProvider(DefaultCredentialsProvider.create())
                    .build()
        ) {
            DeleteClusterResponse cluster = client.deleteCluster(r -> r.identifier(clusterId));
            System.out.println("Initiated delete of " + cluster.arn());

            // The DSQL SDK offers a built-in waiter to poll for deletion.
            System.out.println("Waiting for cluster to finish deletion");
            client.waiter().waitUntilClusterNotExists(
                    getCluster -> getCluster.identifier(clusterId),
                    config -> config.backoffStrategyV2(
                            BackoffStrategy.fixedDelayWithoutJitter(Duration.ofSeconds(10))
                    ).waitTimeout(Duration.ofMinutes(5))
            );
            System.out.println("Deleted " + cluster.arn());
        } catch (ResourceNotFoundException e) {
            System.out.printf("Cluster %s not found in %s%n", clusterId, region);
        }
    }
}            

Pour supprimer un cluster multirégional, utilisez l'exemple suivant. La suppression d'un cluster multirégional peut prendre un certain temps.

package org.example;

import software.amazon.awssdk.auth.credentials.DefaultCredentialsProvider;
import software.amazon.awssdk.regions.Region;
import software.amazon.awssdk.retries.api.BackoffStrategy;
import software.amazon.awssdk.services.dsql.DsqlClient;
import software.amazon.awssdk.services.dsql.DsqlClientBuilder;
import software.amazon.awssdk.services.dsql.model.DeleteClusterRequest;

import java.time.Duration;

public class DeleteMultiRegionClusters {

    public static void main(String[] args) {
        Region region1 = Region.US_EAST_1;
        String clusterId1 = "<your cluster id 1>";
        Region region2 = Region.US_EAST_2;
        String clusterId2 = "<your cluster id 2>";

        DsqlClientBuilder clientBuilder = DsqlClient.builder()
                .credentialsProvider(DefaultCredentialsProvider.create());

        try (
            DsqlClient client1 = clientBuilder.region(region1).build();
            DsqlClient client2 = clientBuilder.region(region2).build()
        ) {
            System.out.printf("Deleting cluster %s in %s%n", clusterId1, region1);
            DeleteClusterRequest request1 = DeleteClusterRequest.builder()
                    .identifier(clusterId1)
                    .build();
            client1.deleteCluster(request1);

            // cluster1 will stay in PENDING_DELETE until cluster2 is deleted
            System.out.printf("Deleting cluster %s in %s%n", clusterId2, region2);
            DeleteClusterRequest request2 = DeleteClusterRequest.builder()
                    .identifier(clusterId2)
                    .build();
            client2.deleteCluster(request2);

            // Now that both clusters have been marked for deletion they will transition
            // to DELETING state and finalize deletion.
            System.out.printf("Waiting for cluster %s to finish deletion%n", clusterId1);
            client1.waiter().waitUntilClusterNotExists(
                    getCluster -> getCluster.identifier(clusterId1),
                    config -> config.backoffStrategyV2(
                            BackoffStrategy.fixedDelayWithoutJitter(Duration.ofSeconds(10))
                    ).waitTimeout(Duration.ofMinutes(5))
            );

            System.out.printf("Waiting for cluster %s to finish deletion%n", clusterId2);
            client2.waiter().waitUntilClusterNotExists(
                    getCluster -> getCluster.identifier(clusterId2),
                    config -> config.backoffStrategyV2(
                            BackoffStrategy.fixedDelayWithoutJitter(Duration.ofSeconds(10))
                    ).waitTimeout(Duration.ofMinutes(5))
            );

            System.out.printf("Deleted %s in %s and %s in %s%n", clusterId1, region1, clusterId2, region2);
        }
    }
}           

Pour supprimer un cluster en un seul Région AWS, utilisez l'exemple suivant.

use aws_config::load_defaults;
use aws_sdk_dsql::client::Waiters;
use aws_sdk_dsql::{
    Client, Config,
    config::{BehaviorVersion, Region},
};

/// Create a client. We will use this later for performing operations on the cluster.
async fn dsql_client(region: &'static str) -> Client {
    // Load default SDK configuration
    let sdk_defaults = load_defaults(BehaviorVersion::latest()).await;

    // You can set your own credentials by following this guide
    // https://docs.aws.amazon.com/sdk-for-rust/latest/dg/credproviders.html
    let credentials = sdk_defaults.credentials_provider().unwrap();

    let config = Config::builder()
        .behavior_version(BehaviorVersion::latest())
        .credentials_provider(credentials)
        .region(Region::new(region))
        .build();

    Client::from_conf(config)
}

/// Delete a DSQL cluster
pub async fn delete_cluster(region: &'static str, identifier: &'static str) {
    let client = dsql_client(region).await;
    let delete_response = client
        .delete_cluster()
        .identifier(identifier)
        .send()
        .await
        .unwrap();
    println!("Initiated delete of {}", delete_response.arn);

    println!("Waiting for cluster to finish deletion");
    client
        .wait_until_cluster_not_exists()
        .identifier(identifier)
        .wait(std::time::Duration::from_secs(300)) // Wait up to 5 minutes
        .await
        .unwrap();
}

#[tokio::main(flavor = "current_thread")]
pub async fn main() -> anyhow::Result<()> {
    let region = "us-east-1";
    let cluster_id = "<cluster to be deleted>";

    delete_cluster(region, cluster_id).await;
    println!("Deleted {cluster_id}");

    Ok(())
}              

Pour supprimer un cluster multirégional, utilisez l'exemple suivant. La suppression d'un cluster multirégional peut prendre un certain temps.

use aws_config::{BehaviorVersion, Region, load_defaults};
use aws_sdk_dsql::client::Waiters;
use aws_sdk_dsql::{Client, Config};

/// Create a client. We will use this later for performing operations on the cluster.
async fn dsql_client(region: &'static str) -> Client {
    // Load default SDK configuration
    let sdk_defaults = load_defaults(BehaviorVersion::latest()).await;

    // You can set your own credentials by following this guide
    // https://docs.aws.amazon.com/sdk-for-rust/latest/dg/credproviders.html
    let credentials = sdk_defaults.credentials_provider().unwrap();

    let config = Config::builder()
        .behavior_version(BehaviorVersion::latest())
        .credentials_provider(credentials)
        .region(Region::new(region))
        .build();

    Client::from_conf(config)
}

/// Create a cluster without delete protection and a name
pub async fn delete_multi_region_clusters(
    region_1: &'static str,
    cluster_id_1: &'static str,
    region_2: &'static str,
    cluster_id_2: &'static str,
) {
    let client_1 = dsql_client(region_1).await;
    let client_2 = dsql_client(region_2).await;

    println!("Deleting cluster {cluster_id_1} in {region_1}");
    client_1
        .delete_cluster()
        .identifier(cluster_id_1)
        .send()
        .await
        .unwrap();

    // cluster_1 will stay in PENDING_DELETE state until cluster_2 is deleted
    println!("Deleting cluster {cluster_id_2} in {region_2}");
    client_2
        .delete_cluster()
        .identifier(cluster_id_2)
        .send()
        .await
        .unwrap();

    // Now that both clusters have been marked for deletion they will transition
    // to DELETING state and finalize deletion
    println!("Waiting for {cluster_id_1} to finish deletion");
    client_1
        .wait_until_cluster_not_exists()
        .identifier(cluster_id_1)
        .wait(std::time::Duration::from_secs(300)) // Wait up to 5 minutes
        .await
        .unwrap();

    println!("Waiting for {cluster_id_2} to finish deletion");
    client_2
        .wait_until_cluster_not_exists()
        .identifier(cluster_id_2)
        .wait(std::time::Duration::from_secs(300)) // Wait up to 5 minutes
        .await
        .unwrap();
}

#[tokio::main(flavor = "current_thread")]
pub async fn main() -> anyhow::Result<()> {
    let region_1 = "us-east-1";
    let cluster_id_1 = "<cluster 1 to be deleted>";
    let region_2 = "us-east-2";
    let cluster_id_2 = "<cluster 2 to be deleted>";

    delete_multi_region_clusters(region_1, cluster_id_1, region_2, cluster_id_2).await;
    println!("Deleted {cluster_id_1} in {region_1} and {cluster_id_2} in {region_2}");

    Ok(())
}            

Pour supprimer un cluster en un seul Région AWS, utilisez l'exemple suivant.

equire "aws-sdk-dsql"

def delete_cluster(region, identifier)
  client = Aws::DSQL::Client.new(region: region)
  cluster = client.delete_cluster(identifier: identifier)
  puts "Initiated delete of #{cluster.arn}"

  # The DSQL SDK offers built-in waiters to poll for deletion.
  puts "Waiting for cluster to finish deletion"
  client.wait_until(:cluster_not_exists, identifier: cluster.identifier) do |w|
    # Wait for 5 minutes
    w.max_attempts = 30
    w.delay = 10
  end
rescue Aws::Errors::ServiceError => e
  abort "Unable to delete cluster #{identifier} in #{region}: #{e.message}"
end

def main
  region = "us-east-1"
  cluster_id = "<your cluster id>"
  delete_cluster(region, cluster_id)
  puts "Deleted #{cluster_id}"
end

main if $PROGRAM_NAME == __FILE__            

Pour supprimer un cluster multirégional, utilisez l'exemple suivant. La suppression d'un cluster multirégional peut prendre un certain temps.

require "aws-sdk-dsql"

def delete_multi_region_clusters(region_1, cluster_id_1, region_2, cluster_id_2)
  client_1 = Aws::DSQL::Client.new(region: region_1)
  client_2 = Aws::DSQL::Client.new(region: region_2)

  puts "Deleting cluster #{cluster_id_1} in #{region_1}"
  client_1.delete_cluster(identifier: cluster_id_1)

  # cluster_1 will stay in PENDING_DELETE state until cluster_2 is deleted
  puts "Deleting #{cluster_id_2} in #{region_2}"
  client_2.delete_cluster(identifier: cluster_id_2)

  # Now that both clusters have been marked for deletion they will transition
  # to DELETING state and finalize deletion
  puts "Waiting for #{cluster_id_1} to finish deletion"
  client_1.wait_until(:cluster_not_exists, identifier: cluster_id_1) do |w|
    # Wait for 5 minutes
    w.max_attempts = 30
    w.delay = 10
  end

  puts "Waiting for #{cluster_id_2} to finish deletion"
  client_2.wait_until(:cluster_not_exists, identifier: cluster_id_2) do |w|
    # Wait for 5 minutes
    w.max_attempts = 30
    w.delay = 10
  end
rescue Aws::Errors::ServiceError => e
  abort "Failed to delete multi-region clusters: #{e.message}"
end

def main
  region_1 = "us-east-1"
  cluster_id_1 = "<your cluster id 1>"
  region_2 = "us-east-2"
  cluster_id_2 = "<your cluster id 2>"

  delete_multi_region_clusters(region_1, cluster_id_1, region_2, cluster_id_2)
  puts "Deleted #{cluster_id_1} in #{region_1} and #{cluster_id_2} in #{region_2}"
end

main if $PROGRAM_NAME == __FILE__         
                

Pour supprimer un cluster en un seul Région AWS, utilisez l'exemple suivant.

using System;
using System.Threading.Tasks;
using Amazon;
using Amazon.DSQL;
using Amazon.DSQL.Model;
using Amazon.Runtime.Credentials;

namespace DSQLExamples.examples
{
    public class DeleteSingleRegionCluster
    {
        /// <summary>
        /// Create a client. We will use this later for performing operations on the cluster.
        /// </summary>
        private static async Task<AmazonDSQLClient> CreateDSQLClient(RegionEndpoint region)
        {
            var awsCredentials = await DefaultAWSCredentialsIdentityResolver.GetCredentialsAsync();
            var clientConfig = new AmazonDSQLConfig
            {
                RegionEndpoint = region
            };
            return new AmazonDSQLClient(awsCredentials, clientConfig);
        }

        /// <summary>
        /// Delete a DSQL cluster.
        /// </summary>
        public static async Task Delete(RegionEndpoint region, string identifier)
        {
            using (var client = await CreateDSQLClient(region))
            {
                var deleteRequest = new DeleteClusterRequest
                {
                    Identifier = identifier
                };

                var deleteResponse = await client.DeleteClusterAsync(deleteRequest);
                Console.WriteLine($"Initiated deletion of {deleteResponse.Arn}");
            }
        }

        private static async Task Main()
        {
            var region = RegionEndpoint.USEast1;
            var clusterId = "<cluster to be deleted>";
            
            await Delete(region, clusterId);
        }
    }
}              

Pour supprimer un cluster multirégional, utilisez l'exemple suivant. La suppression d'un cluster multirégional peut prendre un certain temps.

using System;
using System.Threading.Tasks;
using Amazon;
using Amazon.DSQL;
using Amazon.DSQL.Model;
using Amazon.Runtime.Credentials;
using Amazon.Runtime.Endpoints;

namespace DSQLExamples.examples
{
    public class DeleteMultiRegionClusters
    {
        /// <summary>
        /// Create a client. We will use this later for performing operations on the cluster.
        /// </summary>
        private static async Task<AmazonDSQLClient> CreateDSQLClient(RegionEndpoint region)
        {
            var awsCredentials = await DefaultAWSCredentialsIdentityResolver.GetCredentialsAsync();
            var clientConfig = new AmazonDSQLConfig
            {
                RegionEndpoint = region,
            };
            return new AmazonDSQLClient(awsCredentials, clientConfig);
        }

        /// <summary>
        /// Delete multi-region clusters.
        /// </summary>
        public static async Task Delete(
            RegionEndpoint region1,
            string clusterId1,
            RegionEndpoint region2,
            string clusterId2)
        {
            using (var client1 = await CreateDSQLClient(region1))
            using (var client2 = await CreateDSQLClient(region2))
            {
                var deleteRequest1 = new DeleteClusterRequest
                {
                    Identifier = clusterId1
                };

                var deleteResponse1 = await client1.DeleteClusterAsync(deleteRequest1);
                Console.WriteLine($"Initiated deletion of {deleteResponse1.Arn}");

                // cluster 1 will stay in PENDING_DELETE state until cluster 2 is deleted
                var deleteRequest2 = new DeleteClusterRequest
                {
                    Identifier = clusterId2
                };

                var deleteResponse2 = await client2.DeleteClusterAsync(deleteRequest2);
                Console.WriteLine($"Initiated deletion of {deleteResponse2.Arn}");
            }
        }

        private static async Task Main()
        {
            var region1 = RegionEndpoint.USEast1;
            var cluster1 = "<cluster 1 to be deleted>";
            var region2 = RegionEndpoint.USEast2;
            var cluster2 = "<cluster 2 to be deleted>";

            await Delete(region1, cluster1, region2, cluster2);
        }
    }
}             

Pour supprimer un cluster en un seul Région AWS, utilisez l'exemple suivant.

package main

import (
	"context"
	"fmt"
	"log"
	"time"

	"github.com/aws/aws-sdk-go-v2/config"
	"github.com/aws/aws-sdk-go-v2/service/dsql"
)

func DeleteSingleRegion(ctx context.Context, identifier, region string) error {

	cfg, err := config.LoadDefaultConfig(ctx, config.WithRegion(region))
	if err != nil {
		log.Fatalf("Failed to load AWS configuration: %v", err)
	}

	// Initialize the DSQL client
	client := dsql.NewFromConfig(cfg)

	// Create delete cluster input
	deleteInput := &dsql.DeleteClusterInput{
		Identifier: &identifier,
	}

	// Delete the cluster
	result, err := client.DeleteCluster(ctx, deleteInput)
	if err != nil {
		return fmt.Errorf("failed to delete cluster: %w", err)
	}

	fmt.Printf("Initiated deletion of cluster: %s\n", *result.Arn)

	// Create waiter to check cluster deletion
	waiter := dsql.NewClusterNotExistsWaiter(client, func(options *dsql.ClusterNotExistsWaiterOptions) {
		options.MinDelay = 10 * time.Second
		options.MaxDelay = 30 * time.Second
		options.LogWaitAttempts = true
	})

	// Create the input for checking cluster status
	getInput := &dsql.GetClusterInput{
		Identifier: &identifier,
	}

	// Wait for the cluster to be deleted
	fmt.Printf("Waiting for cluster %s to be deleted...\n", identifier)
	err = waiter.Wait(ctx, getInput, 5*time.Minute)
	if err != nil {
		return fmt.Errorf("error waiting for cluster to be deleted: %w", err)
	}

	fmt.Printf("Cluster %s has been successfully deleted\n", identifier)
	return nil
}

func DeleteCluster(ctx context.Context) {
}

// Example usage in main function
func main() {
	// Your existing setup code for client configuration...

	ctx, cancel := context.WithTimeout(context.Background(), 6*time.Minute)
	defer cancel()

	// Example cluster identifier
	// Need to make sure that cluster does not have delete protection enabled
	identifier := "<CLUSTER_ID>"
	region := "us-east-1"

	err := DeleteSingleRegion(ctx, identifier, region)
	if err != nil {
		log.Fatalf("Failed to delete cluster: %v", err)
	}

}           

Pour supprimer un cluster multirégional, utilisez l'exemple suivant. La suppression d'un cluster multirégional peut prendre un certain temps.

package main

import (
	"context"
	"fmt"
	"log"
	"time"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/config"
	"github.com/aws/aws-sdk-go-v2/service/dsql"
)

func DeleteMultiRegionClusters(ctx context.Context, region1, clusterId1, region2, clusterId2 string) error {
	// Load the AWS configuration for region 1
	cfg1, err := config.LoadDefaultConfig(ctx, config.WithRegion(region1))
	if err != nil {
		return fmt.Errorf("unable to load SDK config for region %s: %w", region1, err)
	}

	// Load the AWS configuration for region 2
	cfg2, err := config.LoadDefaultConfig(ctx, config.WithRegion(region2))
	if err != nil {
		return fmt.Errorf("unable to load SDK config for region %s: %w", region2, err)
	}

	// Create DSQL clients for both regions
	client1 := dsql.NewFromConfig(cfg1)
	client2 := dsql.NewFromConfig(cfg2)

	// Delete cluster in region 1
	fmt.Printf("Deleting cluster %s in %s\n", clusterId1, region1)
	_, err = client1.DeleteCluster(ctx, &dsql.DeleteClusterInput{
		Identifier: aws.String(clusterId1),
	})
	if err != nil {
		return fmt.Errorf("failed to delete cluster in region %s: %w", region1, err)
	}

	// Delete cluster in region 2
	fmt.Printf("Deleting cluster %s in %s\n", clusterId2, region2)
	_, err = client2.DeleteCluster(ctx, &dsql.DeleteClusterInput{
		Identifier: aws.String(clusterId2),
	})
	if err != nil {
		return fmt.Errorf("failed to delete cluster in region %s: %w", region2, err)
	}

	// Create waiters for both regions
	waiter1 := dsql.NewClusterNotExistsWaiter(client1, func(options *dsql.ClusterNotExistsWaiterOptions) {
		options.MinDelay = 10 * time.Second
		options.MaxDelay = 30 * time.Second
		options.LogWaitAttempts = true
	})

	waiter2 := dsql.NewClusterNotExistsWaiter(client2, func(options *dsql.ClusterNotExistsWaiterOptions) {
		options.MinDelay = 10 * time.Second
		options.MaxDelay = 30 * time.Second
		options.LogWaitAttempts = true
	})

	// Wait for cluster in region 1 to be deleted
	fmt.Printf("Waiting for cluster %s to finish deletion\n", clusterId1)
	err = waiter1.Wait(ctx, &dsql.GetClusterInput{
		Identifier: aws.String(clusterId1),
	}, 5*time.Minute)
	if err != nil {
		return fmt.Errorf("error waiting for cluster deletion in region %s: %w", region1, err)
	}

	// Wait for cluster in region 2 to be deleted
	fmt.Printf("Waiting for cluster %s to finish deletion\n", clusterId2)
	err = waiter2.Wait(ctx, &dsql.GetClusterInput{
		Identifier: aws.String(clusterId2),
	}, 5*time.Minute)
	if err != nil {
		return fmt.Errorf("error waiting for cluster deletion in region %s: %w", region2, err)
	}

	fmt.Printf("Successfully deleted clusters %s in %s and %s in %s\n",
		clusterId1, region1, clusterId2, region2)
	return nil
}

// Example usage in main function
func main() {
	ctx, cancel := context.WithTimeout(context.Background(), 10*time.Minute)
	defer cancel()

	err := DeleteMultiRegionClusters(
		ctx,
		"us-east-1",      // region1
		"<CLUSTER_ID_1>", // clusterId1
		"us-east-2",      // region2
		"<CLUSTER_ID_2>", // clusterId2
	)
	if err != nil {
		log.Fatalf("Failed to delete multi-region clusters: %v", err)
	}
}