View a markdown version of this page

Viewing content quality analysis for a router input - AWS Elemental MediaConnect
PrerequisitesProcedure

Viewing content quality analysis for a router input

Prerequisites

You must have already enabled content quality analysis for the router input.

Procedure

You can view content quality analysis status for router inputs through the AWS Management Console, the AWS CLI, and the MediaConnect API.

Console
To check content quality analysis status for a router input

  1. Open the AWS Elemental MediaConnect console at https://console.aws.amazon.com/mediaconnect/.

  2. In the navigation pane, choose Router inputs.

  3. Select the router input that you want to inspect.

  4. Choose the Monitoring tab. The Input content health section displays the real-time status of each content quality analysis metric.

The Monitoring tab shows the following indicators:

  • A dash (-) indicates that the metric is disabled.

  • Currently detected indicates that a quality issue is actively being detected.

  • Recently detected indicates that a quality issue was detected within the configured lookback period.

  • None detected indicates that a quality issue was not detected within the configured lookback period.

You can configure the lookback period using the dropdown list next to the refresh button.

The Router input messages section displays any active content quality analysis alerts.

AWS CLI

To view content quality analysis settings and alerts for a router input, run the get-router-input command:

aws mediaconnect get-router-input --arn "routerInputARN"

The response shows the content quality analysis configuration and any active alerts:

{
    "RouterInput": {
        "Arn": "routerInputARN",
        ...
        "ContentQualityAnalysisConfiguration": {
            "ContentLevel": {
                "BlackFrames": {
                    "State": "ENABLED",
                    "ThresholdSeconds": 30
                },
                "FrozenFrames": {
                    "State": "ENABLED",
                    "ThresholdSeconds": 30
                },
                "SilentAudio": {
                    "State": "ENABLED",
                    "ThresholdSeconds": 30
                }
            }
        },
        ...
        "Messages": [
            {
                "Code": "MONITORING_STREAM_ALERT",
                "Message": "Black frames detected for more than 30 seconds."
            }
        ]
    }
}