# SapNWOnHanaSingle The following are examples of the specifications required to create single-node deployments. Single-node deployment with SAP software installed ``` { "KeyPairName": "ExampleKeyPair", "VpcId": "vpc-a1b2c3d4", "AvailabilityZone1PrivateSubnet1Id": "subnet-11111111aaaaaaaaa", "Timezone" :"PST", "EnableEbsVolumeEncryption" :"Yes", "EbsKmsKeyArn" : "arn:aws:kms:us-east-1:111122223333:alias/aws/ebs", "CreateSecurityGroup" :"No", "DatabaseSecurityGroupId" :"sg-1234567890abcdef0", "ApplicationSecurityGroupId" :"sg-021345abcdef6789", "SidAdmUserId" :"7002", "SapSysGroupId" :"5001", "DatabaseSystemId" :"HYD", "SapSid" :"S4K", "ApplicationDataVolumeType" :"gp2", "DatabaseInstanceNumber" :"30", "InstallAwsBackintAgent" :"Yes", "BackintSpecifications": "{\"backintBucketName\":\"launchwizardsoftware\",\"backintBucketFolder\":\"HANABackintBucketFolder\",\"backintBucketRegion\":\"us-east-1\",\"backintKmsKeyArn\":\"arn:aws:kms:us-east-1:111122223333:alias/aws/s3\",\"backintAgentVersion\":\"2.0.2.732\",\"backintContinueOnFailure\":\"No\",\"backintCreateEbsVolume\":\"No\"}", "CentralSystemOperatingSystem" :"SuSE-Linux-15-SP2-For-SAP-HVM", "CentralSystemAmiId" :"ami-1234567890abcdef0", "CentralSystemInstanceType" :"r5.8xlarge", "CentralSystemHostname" :"sapci", "SapPassword" :"EXAMPLE-PASSWORD", "DatabaseLogVolumeType" :"io2", "SetupTransportDomainController" :"Yes", "InstallSap" :"Yes", "SapInstallationSpecifications": "{\"parameters\":{\"PRODUCT_ID\":\"saps4hana-2021\",\"HDB_SCHEMA_NAME\":\"SAPABAP1\",\"CI_INSTANCE_NR\":\"22\",\"ASCS_INSTANCE_NR\":\"20\",\"SAPINST_CD_SAPCAR\":\"s3:\/\/launchwizardsoftware\/sapmedia\/sapcar\",\"SAPINST_CD_SWPM\":\"s3:\/\/launchwizardsoftware\/sapmedia\/swpm\/20-sp10\",\"SAPINST_CD_KERNEL\":\"s3:\/\/launchwizardsoftware\/sapmedia\/kernel\/785\",\"SAPINST_CD_LOAD\":\"s3:\/\/launchwizardsoftware\/sapmedia\/exports\/s4h-2021\",\"SAPINST_CD_RDBMS\":\"s3:\/\/launchwizardsoftware\/sapmedia\/database\/hana-20-sp06-rev60\",\"SAPINST_CD_RDBMS_CLIENT\":\"s3:\/\/launchwizardsoftware\/sapmedia\/hana-client\/20-11\"}, \"onFailureBehaviour\": \"CONTINUE\"}", "SnsTopicArn" :"arn:aws:sns:us-east-1:111122223333:InstallStatus", "SaveDeploymentArtifacts" :"Yes", "DeploymentArtifactsS3Uri" :"s3://launchwizardsoftware", "DisableDeploymentRollback" :"Yes", "CentralSystemAutomaticRecovery": "Yes", "DatabaseDataVolumeType": "gp3" } ``` Single-node deployment with only HANA database software installed: ``` { "KeyPairName": "ExampleKeyPair", "VpcId": "vpc-a1b2c3d4", "AvailabilityZone1PrivateSubnet1Id": "subnet-11111111aaaaaaaaa", "Timezone": "PST", "EnableEbsVolumeEncryption": "Yes", "EbsKmsKeyArn": "arn:aws:kms:us-east-1:111122223333:alias/aws/ebs", "CreateSecurityGroup": "No", "DatabaseSecurityGroupId": "sg-1234567890abcdef0", "ApplicationSecurityGroupId": "sg-021345abcdef6789", "SidAdmUserId": "7002", "SapSysGroupId": "5001", "DatabaseSystemId": "HYD", "SapSid": "S4K", "ApplicationDataVolumeType": "gp2", "DatabaseInstanceNumber": "30", "InstallSap": "No", "InstallDatabaseSoftware": "Yes", "DatabaseInstallationMediaS3Uri": "s3://launchwizardsoftware/sapmedia/database/hana-20-sp06-rev60", "InstallAwsBackintAgent": "Yes", "BackintSpecifications": "{\"backintBucketName\":\"launchwizardsoftware\",\"backintBucketFolder\":\"HANABackintBucketFolder\",\"backintBucketRegion\":\"us-east-1\",\"backintKmsKeyArn\":\"arn:aws:kms:us-east-1:111122223333:alias/aws/s3\",\"backintAgentVersion\":\"2.0.2.732\",\"backintContinueOnFailure\":\"No\",\"backintCreateEbsVolume\":\"No\"}", "CentralSystemOperatingSystem": "SuSE-Linux-15-SP2-For-SAP-HVM", "CentralSystemAmiId": "ami-1234567890abcdef0", "CentralSystemInstanceType": "r5.8xlarge", "CentralSystemHostname": "sapci", "SapPassword": "EXAMPLE-PASSWORD", "DatabaseLogVolumeType": "io2", "SetupTransportDomainController": "Yes", "SnsTopicArn": "arn:aws:sns:us-east-1:111122223333:InstallStatus", "SaveDeploymentArtifacts": "Yes", "DeploymentArtifactsS3Uri": "s3://launchwizardsoftware", "DisableDeploymentRollback": "Yes", "CentralSystemAutomaticRecovery": "Yes", "DatabaseDataVolumeType": "gp3" } ``` Single-node deployment with only infrastructure resources: ``` { "KeyPairName": "ExampleKeyPair", "VpcId": "vpc-a1b2c3d4", "AvailabilityZone1PrivateSubnet1Id": "subnet-11111111aaaaaaaaa", "Timezone": "PST", "EnableEbsVolumeEncryption": "Yes", "EbsKmsKeyArn": "arn:aws:kms:us-east-1:111122223333:alias/aws/ebs", "CreateSecurityGroup": "No", "DatabaseSecurityGroupId": "sg-1234567890abcdef0", "ApplicationSecurityGroupId": "sg-021345abcdef6789", "SidAdmUserId": "7002", "SapSysGroupId": "5001", "DatabaseSystemId": "HYD", "SapSid": "S4K", "ApplicationDataVolumeType": "gp2", "DatabaseInstanceNumber": "30", "InstallAwsBackintAgent": "Yes", "BackintSpecifications": "{\"backintBucketName\":\"launchwizardsoftware\",\"backintBucketFolder\":\"HANABackintBucketFolder\",\"backintBucketRegion\":\"us-east-1\",\"backintKmsKeyArn\":\"arn:aws:kms:us-east-1:111122223333:alias/aws/s3\",\"backintAgentVersion\":\"2.0.2.732\",\"backintContinueOnFailure\":\"No\",\"backintCreateEbsVolume\":\"No\"}", "CentralSystemOperatingSystem": "SuSE-Linux-15-SP2-For-SAP-HVM", "CentralSystemAmiId": "ami-1234567890abcdef0", "CentralSystemInstanceType": "r5.8xlarge", "CentralSystemHostname": "sapci", "SapPassword": "EXAMPLE-PASSWORD", "DatabaseLogVolumeType": "io2", "SetupTransportDomainController": "Yes", "InstallSap": "No", "InstallDatabaseSoftware": "No", "SnsTopicArn": "arn:aws:sns:us-east-1:111122223333:InstallStatus", "SaveDeploymentArtifacts": "Yes", "DeploymentArtifactsS3Uri": "s3://launchwizardsoftware", "DisableDeploymentRollback": "Yes", "CentralSystemAutomaticRecovery": "Yes", "DatabaseDataVolumeType": "gp3" } ``` Single-node deployment with SAP Web Dispatcher, an Application Load Balancer with a secure protocol enabled, and SAP software installed: ``` { "ApplicationDataVolumeType": "gp3", "applicationName": "ExampleApp", "AvailabilityZone1PrivateSubnet1Id": "subnet-11111111aaaaaaaaa", "CentralSystemAmiId": "ami-1234567890abcdef0", "CentralSystemAutomaticRecovery": "Yes", "CentralSystemHostname": "sappas", "CentralSystemInstanceType": "r5.4xlarge", "CentralSystemOperatingSystem": "Red-Hat-Enterprise-Linux-9.0-For-SAP-HA-US-HVM", "CreateSecurityGroup": "Yes", "DatabaseDataVolumeType": "gp3", "DatabaseInstanceNumber": "11", "DatabaseLogVolumeType": "gp3", "DatabaseOthersVolumeType": "gp3", "DatabaseSystemId": "HDB", "DisableDeploymentRollback": "Yes", "Ec2InstanceRoleName": "AmazonEC2RoleForLaunchWizard", "EnableCloudwatchLogs": "Yes", "EnableEbsVolumeEncryption": "No", "InstallAwsBackintAgent": "No", "InstallDatabaseSoftware": "Yes", "InstallSap": "Yes", "InstallSapWebDispatcher": "Yes", "InstallWebDispatcherLoadBalancer": "Yes", "KeyPairName": "ExampleKeyPair", "NewApplicationSecurityGroupName": "ExampleApp_App_SG", "NewDatabaseSecurityGroupName": "ExampleApp_DB_SG", "NewSecurityGroupRules": "[{\"type\":\"ip\",\"value\":\"10.0.0.0/32\"}]", "NewWebDispatcherSecurityGroupName": "ExampleApp_WD_SG", "SapInstallationSpecifications": "{\"parameters\":{\"PRODUCT_ID\":\"sapNetweaverJavaOnly-750\",\"JAVA_SCHEMA_NAME\":\"SAPJAVA1\",\"JAVA_CI_INSTANCE_NR\":\"12\",\"JAVA_SCS_INSTANCE_NR\":\"10\",\"WD_INSTANCE_NR\":\"14\",\"SAPINST_CD_SAPCAR\":\"s3://launchwizard-example/sapcar/\",\"SAPINST_CD_SWPM\":\"s3://launchwizard-example/swpm/10-sp39/\",\"SAPINST_CD_KERNEL\":\"s3://launchwizard-example/kernel/\",\"SAPINST_CD_LOAD\":\"s3://launchwizard-example/exports/netweaverJava-750/\",\"SAPINST_CD_RDBMS\":\"s3://launchwizard-example/database/hana-20-sp07/\",\"SAPINST_CD_RDBMS_CLIENT\":\"s3://launchwizard-example/hana-client/20-11/\",\"SAPINST_CD_WD\":\"s3://launchwizard-example-us-east-1/webdisp/\"}}", "SapPassword": "EXAMPLE-PASSWORD", "SapSid": "SDB", "SapSysGroupId": "5001", "SaveDeploymentArtifacts": "No", "SetupTransportDomainController": "No", "SidAdmUserId": "5000", "Timezone": "UTC", "VpcId": "vpc-a1b2c3d4", "WebDispatcherAdminUserId": "5100", "WebDispatcherInstanceNumber": "14", "WebDispatcherLoadBalancerACMCertificateArn": "arn:aws:acm:region:account:certificate/certificate_ID", "WebDispatcherLoadBalancerAvailabilityZone1SubnetId": "subnet-11111111aaaaaaaaa", "WebDispatcherLoadBalancerAvailabilityZone2SubnetId": "subnet-22222222aaaaaaaaa", "WebDispatcherLoadBalancerInternetFacing": "Yes", "WebDispatcherLoadBalancerSecureProtocolEnabled": "Yes", "WebDispatcherLoadBalancerType": "ALB", "WebDispatcherNewLoadBalancerSecurityGroupName": "ExampleApp_WDLB_SG", "WebDispatcherSystemId": "WDD", "WebDispatcherVersion": "7.93" } ``` The following list describes each specification input: + **KeyPairName** Type: String Constraints: Up to 255 ASCII characters Example: home Description: The name of an existing Amazon EC2 key pair. All instances will launch with this key pair. Required: Yes + **VpcId** Type: String Example: vpc-01234567890 Description: The existing Amazon VPC where you want to deploy the system. Required: Yes + **AvailabilityZone1PrivateSubnet1Id** Type: String Example: subnet-11111111aaaaaaaaa Description: The existing private subnet where you want to deploy the system. Required: Yes + **ProxyServerAddress** Type: String Example: http://10.x.x.x:8080 Description: The `ProxyServerAddress` address for http access. For example, *http://xyz.abc.com:8080* or *http://10.x.x.x:8080*. Required: No + **NoProxy** Type: String Example: http://10.x.x.x:8080 Description: A comma separated list of URLs, CIDR ranges, or IP addresses for which to disable ProxyServerAddress settings using the `NO_ProxyServerAddress` environment variable. You can specify input for this specification when input has been provided for `ProxyServerAddress`. Any values you specify are appended to the default configuration for the `NO_ProxyServerAddress` environment variable. The following entries are used by default: `NO_ProxyServerAddress="localhost,127.0.0.1,169.254.169.254,.internal,{VPC_CIDR_RANGE}"` Required: No + **Timezone** Type: String Example: UTC Description: The time zone to configure for your SAP resources. Required: Yes + **EnableEbsVolumeEncryption** Type: String AllowedValues: `Yes` \$1 `No` Description: Specifies whether to encrypt the EBS volumes used for the deployment. Required: Yes + **EbsKmsKeyArn** Type: String Example: arn:aws:kms:us-west-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab Description: Specifies a KMS key ARN for encrypting EBS volumes when `EnableEbsVolumeEncryption` is set to `Yes`. Conditional: If `EnableEbsVolumeEncryption` is `Yes`, you must specify a KMS key ARN. Required: No + **CreateSecurityGroup** Type: String AllowedValues: `Yes` \$1 `No` Description: Specifies whether you want to create new security groups for the deployment. Required: Yes + **NewSecurityGroupRules** Type: String Example: `"[{\"type\":\"ip\",\"value\":\"10.0.0.0/32\"},{\"type\":\"securityGroupId\",\"value\":\"sg-0e1c107d640209244\"}]"` Description: A list of CIDR blocks or Security Group IDs to be used for creating a new security group. Conditional: If you specify `Yes` for `CreateSecurityGroup`, you must also provide input for this configuration. Required: No + **NewDatabaseSecurityGroupName** Type: String Example: dbsgname Description: The name of the database tier security group. Conditional: If you specify `Yes` for `CreateSecurityGroup`, you must also provide input for this configuration. Required: No + **NewApplicationSecurityGroupName** Type: String Example: dbsgname Description: The name of the application tier security group. Conditional: If you specify `Yes` for `CreateSecurityGroup`, you must also provide input for this configuration. Required: No + **DatabaseSecurityGroupId** Type: String Example: sg-1234567890abcdef Description: The security group ID for your HANA database. Conditional: If you specify `No` for `CreateSecurityGroup`, you must provide an input for this configuration. Required: No + **ApplicationSecurityGroupId** Type: String Example: sg-1234567890ghijkl Description: The security group ID for your SAP application. Conditional: If you specify `No` for `CreateSecurityGroup`, you must provide an input for this configuration. Required: No + **DomainName** Type: String Example: example.com Description: The domain name to be used for the deployment. Required: No + **HostedZoneName** Type: String Example: example.com Description: The Amazon Route 53 hosted zone name. Required: No + **HostedZoneId** Type: String Example: Z36KTIQEXAMPLE Description: Route 53 hosted zone id. Conditional: If you specify a value for `HostedZoneName`, you must also provide input for this specification. Required: No + **DedicatedHostId** Type: CommaDelimitedList String Example: h-012a3456b7890cdef Description: The existing Dedicated Hosts on which you want to launch your instances. Conditional: If you are using Amazon EC2 High Memory Instances, you must provide an input for this specification. For more information on Amazon EC2 High Memory Instances, see [Amazon EC2 High Memory Instances](https://aws.amazon.com/ec2/instance-types/high-memory/). Required: No + **ConfigurationScripts** Type: String Example: `{"preConfigurationScripts":{"onFailureBehaviour":"CONTINUE","configurationScripts":[{"nodeTypesToRunScriptFor":["DB"],"s3URL":"s3://launchwizard-scripts-preconfig-us-west-2/preconfig-install.sh","sequence":"0"}]},"postConfigurationScripts":{"onFailureBehaviour":"CONTINUE","configurationScripts":[{"nodeTypesToRunScriptFor":["DB"],"s3URL":"s3://launchwizard-scripts-postconfig-us-west-2/postconfig-install.sh","sequence":"0"}]}}` Description: A list of pre- and post-configuration deployment scripts formatted as stringified JSON. You can specify one or more pre- or post-configuration scripts separately, or together. You must provide the follow details for each script: + The URL for the script that has been uploaded to Amazon S3. + A sequence number which specifies the order of execution. + The type of node to run the script on. You can only specify `DB` for this deployment. + The behavior to use should a failure or timeout occur when running the script. You can specify `CONTINUE` to proceed with the deployment or `ROLLBACK` to cancel the deployment. Required: No + **SidAdmUserId** Type: String Example: 1002 Description: The UID for the `adm` user. The default UID is `1002`. Required: Yes + **SapSysGroupId** Type: String Example: 1001 Description: GID for the `sapsys` group. The default GID is `1001`. Required: Yes + **DatabaseSystemId** Type: String Constraints: This value must consist of 3 characters. Example: HDB Description: The SAP HANA system ID for installation and setup. Required: Yes + **SapSid** Type: String Constraints: This value must consist of 3 characters. Example: HDB Description: The SAP application system ID for installation and setup. Required: Yes + **ApplicationDataVolumeType** Type: String AllowedValues: `gp2` \$1 `gp3` \$1 `io1` \$1 `io2` Description: The Amazon EBS volume type for the SAP application. Required: Yes + **DatabaseInstanceNumber** Type: String Constraints: The instance number must be between `00` and `97`. Example: 00 Description: The SAP HANA instance number to use for installation, setup, and to open ports for security groups. Required: Yes + **InstallAwsBackintAgent** Type: String AllowedValues: `Yes` \$1 `No` Description: Specifies whether to install the AWS Backint Agent for SAP HANA. Conditional: This specification can only used in this deployment pattern if `InstallSap` is specified as `Yes`, or `InstallSap` is specified as `No` and `InstallDatabaseSoftware` is set to `Yes`. Required: Yes + **BackintSpecifications** Type: String Example: ``` "{\"backintBucketName\":\"amzn-s3-demo-bucket\",\"backintBucketFolder\":\"HANABackintBucketFolder\",\"backintBucketRegion\":\"us-east-1\",\"backintKmsKeyArn\":\"arn:aws:kms:us-east-1:111122223333:alias/aws/s3\",\"backintAgentVersion\":\"2.0.2.732\",\"backintContinueOnFailure\":\"No\",\"backintCreateEbsVolume\":\"No\"}" ``` Description: Parameters for the AWS Backint Agent for SAP HANA formatted as stringified JSON. Conditional: If you specify `Yes` for `InstallAwsBackintAgent`, you must also provide input for this specification. Required: No + **PasOperatingSystem** Type: String Example: SuSE-Linux-12-SP5-For-SAP-HVM Description: The operating system (including the version) for the PAS node. Required: Yes + **PasAmiId** Type: String Example: ami-33333333333333 Description: The AMI ID to use for the PAS node. The AMI can be provided by Amazon, sourced from AWS Marketplace, or with Bring your own images (BYOI). If the AMI from AWS Marketplace is using the Bring Your Own Subscription model (BYOS), you must provide the registation code for SUSE distributions or an account and password for RHEL distributions. Required: Yes + **PasByoip** Type: String Example: 10.0.1.10 Description: A private IPv4 address to be used by the PAS node. If no value is provided, Amazon EC2 will assign an available IPv4 address in the subnet. Required: No + **PasSlesByosRegistrationCode** Type: String Description: The SLES registration code for Bring Your Own Subscription model (BYOS) images. Conditional: If you specify SUSE as the operating system, and it uses BYOS, you must also provide input for this specification. Required: No + **PasRhelByosUsername** Type: String Example: admin Description: The username in the Red Hat Enterprise Linux (RHEL) operating system to use. Conditional: If you specify a BYOS RHEL AMI, you must also provide input for this specification. Required: No + **PasRhelByosUserPassword** Type: String Description: The password for the user specified in `PasRhelByosUsername`. Conditional: If you specify a BYOS RHEL AMI, you must also provide input for this specification. Required: No + **PasAutomaticRecovery** Type: String AllowedValues: `Yes` \$1 `No` Description: Specify `Yes` to enable Amazon CloudWatch action based recovery for the PAS node or `No` to keep it disabled. For HA deployments, set this value to `No` as the cluster will manage availability for the nodes. Required: Yes + **PasInstanceType** Type: String Example: r5.2xlarge Description: The instance type used for the PAS node. Required: Yes + **PasHostname** Type: String Example: PASPrimary Description: The host name or DNS short name to use for the PAS node. Required: Yes + **InstallAas** Type: String AllowedValues: `Yes` \$1 `No` Description: Specifies whether to install AAS instances. Required: Yes + **AasHostCount** Type: Number Min: 0 Max: 10 Description: The number of AAS instances to deploy. Conditional: If you specify `true` for `InstallAas`, you must provide a value for this specification. Required: Yes + **AasByoip** Type: String Example: 10.0.1.10 Description: A private IPv4 address to be used by the AAS node. If no value is provided, Amazon EC2 will assign an available IPv4 address in the subnet. Conditional: You must specify `true` for `InstallAas` to provide a value for this specification. Required: No + **AasAutomaticRecovery** Type: String AllowedValues: `Yes` \$1 `No` Description: Specify `Yes` to enable Amazon CloudWatch action based recovery for the PAS node or `No` to keep it disabled. For HA deployments, set this value to `No` as the cluster will manage availability for the nodes. Conditional: If you specify `true` for `InstallAas`, you must provide a value for this specification. Required: Yes + **AasInstanceType** Type: String Example: r5.2xlarge Description: The instance type used for the AAS node. Conditional: If you specify `true` for `InstallAas`, you must provide a value for this specification. Required: Yes + **AasHostnames** Type: String Example: AASPrimary Description: The host name or DNS short name to use for the AAS node. Conditional: If you specify `true` for `InstallAas`, you must provide a value for this specification. Required: Yes + **CentralSystemOperatingSystem** Type: String Example: SuSE-Linux-12-SP5-For-SAP-HVM Description: The operating system (including the version) for database. AllowedValues: `SuSE-Linux-12-SP4-HVM | SuSE-Linux-12-SP4-For-SAP-HVM | SuSE-Linux-12-SP5-HVM | SuSE-Linux-12-SP5-For-SAP-HVM | SuSE-Linux-15-HVM | SuSE-Linux-15-For-SAP-HVM | SuSE-Linux-15-SP1-HVM | SuSE-Linux-15-SP1-For-SAP-HVM | SuSE-Linux-15-SP2-HVM | SuSE-Linux-15-SP2-For-SAP-HVM | SuSE-Linux-15-SP3-HVM | SuSE-Linux-15-SP3-For-SAP-HVM | SuSE-Linux-15-SP4-HVM | SuSE-Linux-15-SP5-HVM | SuSE-Linux-15-SP6-HVM | SuSE-Linux-15-SP4-For-SAP-HVM | SuSE-Linux-15-SP5-For-SAP-HVM| SuSE-Linux-15-SP6-For-SAP-HVM | Red-Hat-Enterprise-Linux-7.6-For-SAP-HA-US-HVM | Red-Hat-Enterprise-Linux-7.7-For-SAP-HA-US-HVM | Red-Hat-Enterprise-Linux-7.9-For-SAP-HA-US-HVM | Red-Hat-Enterprise-Linux-8.1-For-SAP-HA-US-HVM | Red-Hat-Enterprise-Linux-8.2-For-SAP-HA-US-HVM | Red-Hat-Enterprise-Linux-8.4-For-SAP-HA-US-HVM | Red-Hat-Enterprise-Linux-8.6-For-SAP-HA-US-HVM | Red-Hat-Enterprise-Linux-8.8-For-SAP-HA-US-HVM| Red-Hat-Enterprise-Linux-8.10-For-SAP-HA-US-HVM | Red-Hat-Enterprise-Linux-9.0-For-SAP-HA-US-HVM | Red-Hat-Enterprise-Linux-9.2-For-SAP-HA-US-HVM | Red-Hat-Enterprise-Linux-9.4-For-SAP-HA-US-HVM | Red-Hat-Enterprise-Linux-7.6-BYOS | Red-Hat-Enterprise-Linux-7.7-BYOS | Red-Hat-Enterprise-Linux-8.1-BYOS | Red-Hat-Enterprise-Linux-8.2-BYOS | Red-Hat-Enterprise-Linux-8.4-BYOS | Red-Hat-Enterprise-Linux-8.6-BYOS | Red-Hat-Enterprise-Linux-8.8-BYOS| Red-Hat-Enterprise-Linux-8.10-BYOS | Red-Hat-Enterprise-Linux-9.0-BYOS | Red-Hat-Enterprise-Linux-9.2-BYOS | Red-Hat-Enterprise-Linux-9.4-BYOS | SuSE-Linux-12-SP4-For-SAP-BYOS-HVM | SuSE-Linux-12-SP5-For-SAP-BYOS-HVM | SuSE-Linux-15-For-SAP-BYOS-HVM | SuSE-Linux-15-SP1-For-SAP-BYOS-HVM | SuSE-Linux-15-SP2-For-SAP-BYOS-HVM | SuSE-Linux-15-SP3-For-SAP-BYOS-HVM | SuSE-Linux-15-SP4-For-SAP-BYOS-HVM | SuSE-Linux-15-SP5-For-SAP-BYOS-HVM | SuSE-Linux-15-SP6-For-SAP-BYOS-HVM ` Required: Yes + **CentralSystemAmiId** Type: String Example: ami-11111111111111 Description: The AMI ID to use for the database nodes. The AMI can be provided by Amazon, sourced from AWS Marketplace, or with Bring your own images (BYOI). If the AMI from AWS Marketplace is using the Bring Your Own Subscription model (BYOS), you must provide the registation code for SUSE distributions or an account and password for RHEL distributions. Required: Yes + **CentralSystemByoip** Type: String Example: 10.0.1.10 Description: A private IPv4 address to be used by the primary SAP HANA node. If no value is provided, Amazon EC2 will assign an available IPv4 address in the subnet. Required: No + **CentralSystemAutomaticRecovery** Type: String AllowedValues: `Yes` \$1 `No` Description: Specify `Yes` to enable Amazon CloudWatch action based recovery for database nodes or `No` to keep it disabled. For HA deployments, set this value to `No` as the cluster will manage availability for the nodes. Required: Yes + **CentralSystemInstanceType** Type: String Example: r5.2xlarge Description: The instance type used for database nodes. Required: Yes + **CentralSystemHostname** Type: String Example: sapci Description: The host name or DNS short name to use for the primary database node. Required: Yes + **CentralSystemSlesByosRegistrationCode** Type: String Description: The SLES registration code for Bring Your Own Subscription model (BYOS) images. Conditional: If you specify SUSE as the operating system, and it uses BYOS, you must also provide input for this specification. Required: No + **CentralSystemRhelByosUserName** Type: String Example: admin Description: The username in the Red Hat Enterprise Linux (RHEL) operating system to use. Conditional: If you specify a BYOS RHEL AMI, you must also provide input for this specification. Required: No + **CentralSystemRhelByosUserPassword** Type: String Description: The password for the user specified in `DatabaseRhelByosUserName`. Conditional: If you specify a BYOS RHEL AMI, you must also provide input for this specification. Required: No + **SapPassword** Type: String Description: Specifes the password to use for setting up the SAP application and database defaults users. The password must: + Be between 10 and 13 alphanumeric characters. + Not begin with a number or special character. + Have at least one uppercase letter. + Have at least one lowercase letter. + Have at least one digit. + Only use the following special characters: **\$1**, **@**, and **\$1**. Required: Yes + **DatabaseLogVolumeType** Type: String AllowedValues: `gp2` \$1 `gp3` \$1 `io1` \$1 `io2` \$1 `fsx` Description: The Amazon EBS volume type, or FSx for ONTAP (if supported) file share, for database logging. Conditional: If `fsx` is specified for `DatabaseLogVolumeType`, you must also specify `fsx` for `DatabaseDataVolumeType`. Required: Yes + **DatabaseOthersVolumeType** Type: String AllowedValues: `gp2` \$1 `gp3` \$1 `io1` \$1 `io2` Default: `gp3` Description: The Amazon EBS volume type for other file systems, including the root volume. Conditional: If `fsx` is specified for `DatabaseDataVolumeType` and `DatabaseLogVolumeType`, you must provide input for this specification. Required: No + **InstallDatabaseSoftware** Type: String AllowedValues: `Yes` \$1 `No` Description: Specifies whether to install SAP HANA software. Required: Yes + **DatabaseInstallationMediaS3Uri** Type: String Example: s3://myhanabucket/sap-hana-sps11/ Description: The full path to the Amazon S3 location with SAP HANA installation media. Required: No + **DatabaseDataFsxVolumeSize** Type: Number Example: 500 Description: The volume size of the SAP HANA data volume on Amazon FSx, in GBs. Conditional: If you specify `fsx` for `DatabaseDataVolumeType`, you must also provide input for this specification. Required: No + **DatabaseLogFsxVolumeSize** Type: Number Example: 50 Description: The volume size of the SAP HANA log volume on Amazon FSx, in GBs. Conditional: If you specify `fsx` for `DatabaseLogVolumeType`, you must also provide input for this specification. Required: No + **DatabaseOtherFsxVolumeSize** Type: Number Example: 50 Description: The volume size of the other SAP HANA volume on Amazon FSx, in GBs. Conditional: If you specify `fsx` for `DatabaseOthersVolumeType`, you must also provide input for this specification. Required: No + **SetupTransportDomainController** Type: String AllowedValues: `Yes` \$1 `No` Description: Specifies whether to use transport FS. Required: Yes + **CreateTransportDomainControllerFileSystem** Type: String AllowedValues: `Yes` \$1 `No` Default: `No` Description: Specifies whether to create a new Amazon EFS for the transport domain controller. Conditional: You must specify `Yes` for `SetupTransportDomainController` to provide value for this specification. Required: No + **TransportDomainControllerFileSystemId** Type: String Example: `fs-1234567890abcdef0` Description: The ID of an existing Elastic File System for the transport domain controller. Conditional: If you specify `No` for `CreateTransportDomainControllerFileSystem`, you must also provide input for this specification. Required: Yes + **InstallSap** Type: String AllowedValues: `Yes` \$1 `No` Description: Specifies whether to install SAP. The following specification combinations can be used to customize your application: + To install SAP application software, specify `No` for `InstallDatabaseSoftware` and `Yes` for `InstallSap`. + To install only the database software and deploy infrastructure resources for the application and database components, specify `Yes` for `InstallDatabaseSoftware` and `No` for `InstallSap`. + To only deploy infrastructure resources for the SAP application and database components, specify `No` for `InstallDatabaseSoftware` and `InstallSap`. Required: Yes + **SapInstallationSpecifications** Type: String Example without SAP Web Dispatcher: `{"parameters":{"PRODUCT_ID":"saps4hana-2022","HDB_SCHEMA_NAME":"SAPABAP1","CI_INSTANCE_NR":"12","ASCS_INSTANCE_NR":"10","SAPINST_CD_SAPCAR":"s3://launchwizard-test-sap-media/sapcar","SAPINST_CD_SWPM":"s3://launchwizard-test-sap-media/swpm/10-sp30","SAPINST_CD_KERNEL":"s3://launchwizard-test-sap-media/kernel","SAPINST_CD_LOAD":"s3://launchwizard-test-sap-media/exports/nw-75","SAPINST_CD_RDBMS":"s3://launchwizard-test-sap-media/database","SAPINST_CD_RDBMS_CLIENT":"s3://launchwizard-test-sap-media/hana-client"}, "onFailureBehaviour": "CONTINUE/ROLLBACK"}` Example with SAP Web Dispatcher: \$1"parameters":\$1"PRODUCT\$1ID":"sapNetweaver-752","CI\$1INSTANCE\$1NR":"12","ASCS\$1INSTANCE\$1NR":"10","WD\$1INSTANCE\$1NR":"14","ASCS\$1VIRTUAL\$1HOSTNAME":"sapvirascs","ASCS\$1OVERLAY\$1IP":"10.0.0.8","ERS\$1VIRTUAL\$1HOSTNAME":"sapvirers","ERS\$1OVERLAY\$1IP":"10.0.0.9","DB\$1VIRTUAL\$1HOSTNAME":"sapvirdb","SAP\$1PACEMAKER\$1TAG":"sappacetag","SAPINST\$1CD\$1SAPCAR":"s3://launchwizard-example/sapcar/","SAPINST\$1CD\$1SWPM":"s3://launchwizard-example/swpm/10-sp39/","SAPINST\$1CD\$1KERNEL":"s3://launchwizard-example/kernel/","SAPINST\$1CD\$1LOAD":"s3://launchwizard-example/exports/nw-752/","SAPINST\$1CD\$1RDBMS":"s3://launchwizard-example/database/hana-20-sp07/","SAPINST\$1CD\$1RDBMS\$1CLIENT":"s3://launchwizard-example/hana-client/20-11/","SAPINST\$1CD\$1WD":"s3://launchwizard-example-us-east-1/webdisp/"\$1 Description: A list of SAP Application installation parameters formatted as stringified JSON. You can specify any of the following values for the `PRODUCT_ID`: `sapNetWeaver-752 | sapNetWeaver-750 | sapNetweaverJavaOnly-750 | saps4hana-1909 | saps4hana-2020 | saps4hana-2021 | saps4hana-2022 | saps4hana-2023 | saps4hanafoundations-2021 | saps4hanafoundations-2022 | saps4hanafoundations-2023 | sapbw4hana-2.0 | sapbw4hana-2021 | sapsolman-7.2` Conditional: If you specify `Yes` for `InstallSap`, you must also provide input for this specification. Required: No + **SnsTopicArn** Type: String Example: arn:aws:sns:us-east-1:1234567890:Test-Topic Description: The Amazon SNS topic used to receive the final deployment status from Launch Wizard. Required: No + **DisableDeploymentRollback** Type: String AllowedValues: `Yes` \$1 `No` Description: Specifies whether to disable rollback of the CloudFormation stack if the stack creation fails. Required: Yes + **SaveDeploymentArtifacts** Type: String AllowedValues: `Yes` \$1 `No` Description: Specifies whether to save the deployment artifacts in Service Catalog after deployment is complete. Required: Yes + **DeploymentArtifactsS3Uri** Type: String Example: s3://save-test-us-east-1 Description: The Amazon S3 URI in which to save the deployment artifacts for Service Catalog. Required: No + **InstallSapWebDispatcher** Type: String AllowedValues: `Yes` \$1 `No` Description: Specifies whether to install SAP Web Dispatcher. Required: No + **InstallWebDispatcherLoadBalancer** Type: String AllowedValues: `Yes` \$1 `No` Description: Specifies whether to deploy a load balancer in front of SAP Web Dispatcher nodes. Conditional: This specification can only be used if `InstallSapWebDispatcher` and `InstallSap` are specified as `Yes`. Required: Yes + **WebDispatcherLoadBalancerType** Type: String AllowedValues: ALB \$1 NLB Description: Specifies the kind of load balancer to deploy in front of SAP Web Dispatcher nodes. Conditional: This specification can only be used if `InstallSapWebDispatcher`, `InstallSap`, and`InstallWebDispatcherLoadBalancer` are specified as `Yes`. Required: Yes + **WebDispatcherLoadBalancerInternetFacing** Type: String AllowedValues: `Yes` \$1 `No` Description: Specifies whether the load balancer in front of SAP Web Dispatcher is internet-facing. Conditional: This specification can only be used if `InstallSapWebDispatcher`, `InstallSap`, and`InstallWebDispatcherLoadBalancer` are specified as `Yes`. Required: Yes + **WebDispatcherInstanceNumber** Type: Number Min: 00 Max: 97 Description: The double-digit instance number for the SAP Web Dispatcher instance. Conditional: This specification can only be used if `InstallSapWebDispatcher` and `InstallSap` are specified as `Yes`. Required: Yes + **WebDispatcherAdminUserId** Type: Number Min: 100 Max: 65536 Description: The user ID number for the SAP Web Dispatcher administrator. Conditional: This specification can only be used if `InstallSapWebDispatcher` is specified as `Yes`. Required: Yes + **WebDispatcherSystemId** Type: String Description: This value must consist of 3 uppercase characters. Conditional: This specification can only be used if `InstallSapWebDispatcher` is specified as `Yes`. Required: Yes + **WebDispatcherVersion** Type: String AllowedValues: `7.89` Description: The SAP Web Dispatcher version to use. For more information, see [ Supported versions of SAP Web Dispatcher](https://docs.aws.amazon.com/launchwizard/latest/userguide/launch-wizard-sap-versions.html). Conditional: This specification can only be used if `InstallSapWebDispatcher` and `InstallSap` are specified as `Yes`. Required: Yes + **WebDispatcherLoadBalancerSecureProtocolEnabled** Type: String AllowedValues: `Yes` \$1 `No` Description: Specifies the ACM certificate to use for your load balancer’s TLS/HTTPS listener. Conditional: This specification can only be used if `InstallSapWebDispatcher`, `InstallSap`, and`InstallWebDispatcherLoadBalancer` are specified as `Yes`. Required: Yes + **WebDispatcherLoadBalancerACMCertificateArn** Type: String Example: Description: The ARN of the ACM certificate to use for your load balancer’s TLS/HTTPS listener. Conditional: This specification can only be used if `InstallSapWebDispatcher`, `InstallSap`, `InstallWebDispatcherLoadBalancer`, and WebDispatcherLoadBalancerSecureProtocolEnabled are specified as `Yes`. Required: Yes + **WebDispatcherLoadBalancerAvailabilityZone1SubnetId** Type: String Example: subnet-11111111aaaaaaaaa Description: The existing private subnet where you want to deploy SAP Web Dispatcher nodes. Conditional: This specification can only be used if `InstallSapWebDispatcher`, `InstallSap`, and`InstallWebDispatcherLoadBalancer` are specified as `Yes`. Required: Yes + **WebDispatcherLoadBalancerAvailabilityZone2SubnetId** Type: String Example: subnet-22222222aaaaaaaaa Description: The additional existing private subnet where you want to deploy SAP Web Dispatcher nodes. Conditional: This specification can only be used if `InstallSapWebDispatcher`, `InstallSap`, and`InstallWebDispatcherLoadBalancer` are specified as `Yes`. Required: Yes + **WebDispatcherSecurityGroupId** Type: String Example: sg-1234567890abcdef Description: The security group to assign to your SAP Web Dispatcher nodes. Conditional: This specification can only be used if `InstallSapWebDispatcher` is specified as `Yes`. Required: Yes + **WebDispatcherLoadBalancerSecurityGroupId** Type: String Example: sg-1234567890abcdef Description: The security group to assign to the load balancer for SAP Web Dispatcher nodes. Conditional: This specification can only be used if `InstallSapWebDispatcher`, `InstallSap`, and`InstallWebDispatcherLoadBalancer` are specified as `Yes`. Required: Yes + **NewWebDispatcherSecurityGroupName** Type: String Example: Description: The name of the security group to create for SAP Web Dispatcher. Conditional: This specification can only be used if `InstallSapWebDispatcher`, `InstallSap`, `InstallWebDispatcherLoadBalancer`, and`CreateSecurityGroup` are specified as `Yes`. Required: Yes + **WebDispatcherNewLoadBalancerSecurityGroupName** Type: String Example: Description: The name of the security group to create for the load balancer for SAP Web Dispatcher. Conditional: This specification can only be used if `InstallSapWebDispatcher`, `InstallSap`, `InstallWebDispatcherLoadBalancer`, and`CreateSecurityGroup` are specified as `Yes`. Required: Yes