Setting the web interface time zone
This information applies to AWS Elemental Conductor Live, AWS Elemental Live and AWS Elemental Statmux. Follow this procedure if you didn't set the time zone when you installed the software on each node, or if you want to change the time zone on any node.
The time zone set on the node is used as follows:
-
The web interface shows all activity with a timestamp for the time zone that you specify.
-
Activity using the Linux CLI or the REST API doesn't use this time zone.
Where to perform the configuration
Make sure you perform the configuration on the correct nodes.
| Node | Work on this node? |
|---|---|
| Primary Conductor Live node | Yes |
| Secondary Conductor Live node | No. Instead, the primary Conductor Live pushes its configuration to the secondary Conductor Live |
| Each worker node | Yes |
To set the time zone on the Conductor Live
Perform this procedure on the primary Conductor Live.
-
On the web interface for the primary Conductor Live, go to the Settings page and choose General.
-
In Timezone, choose the time zone, then choose Update.
To set the time zone on the worker nodes
Perform this procedure on each worker node.
-
On the worker web interface, choose Settings from the main menu. Choose the Network tab, then choose General.
-
Choose the time zone, then choose Save.
