DynamoDB-Beispiele für die Verwendung von AWS CLI mit einem Bash-Skript
Die folgenden Codebeispiele zeigen, wie Sie Aktionen durchführen und gängige Szenarien implementieren, indem Sie die AWS Command Line Interface mit Bash-Skript mit DynamoDB nutzen.
Bei Grundlagen handelt es sich um Codebeispiele, die Ihnen zeigen, wie Sie die wesentlichen Vorgänge innerhalb eines Services ausführen.
Aktionen sind Codeauszüge aus größeren Programmen und müssen im Kontext ausgeführt werden. Während Aktionen Ihnen zeigen, wie Sie einzelne Service-Funktionen aufrufen, können Sie Aktionen im Kontext der zugehörigen Szenarien anzeigen.
Szenarien sind Codebeispiele, die Ihnen zeigen, wie Sie bestimmte Aufgaben ausführen, indem Sie mehrere Funktionen innerhalb eines Service aufrufen oder mit anderen AWS-Services kombinieren.
Jedes Beispiel enthält einen Link zum vollständigen Quellcode, wo Sie Anleitungen zum Einrichten und Ausführen des Codes im Kontext finden.
Grundlagen
Wie das aussehen kann, sehen Sie am nachfolgenden Beispielcode:
Erstellen einer Tabelle, die Filmdaten enthalten kann.
Einfügen, Abrufen und Aktualisieren eines einzelnen Films in der Tabelle.
Schreiben von Filmdaten in die Tabelle anhand einer JSON-Beispieldatei.
Abfragen nach Filmen, die in einem bestimmten Jahr veröffentlicht wurden.
Scan nach Filmen, die in mehreren Jahren veröffentlicht wurden.
Löschen eines Films aus der Tabelle und anschließendes Löschen der Tabelle.
- AWS CLI mit Bash-Skript
-
Anmerkung
Auf GitHub finden Sie noch mehr. Hier finden Sie das vollständige Beispiel und erfahren, wie Sie das AWS-Codebeispiel
einrichten und ausführen. Das DynamoDB-Szenario „Erste Schritte“.
############################################################################### # function dynamodb_getting_started_movies # # Scenario to create an Amazon DynamoDB table and perform a series of operations on the table. # # Returns: # 0 - If successful. # 1 - If an error occurred. ############################################################################### function dynamodb_getting_started_movies() { source ./dynamodb_operations.sh key_schema_json_file="dynamodb_key_schema.json" attribute_definitions_json_file="dynamodb_attr_def.json" item_json_file="movie_item.json" key_json_file="movie_key.json" batch_json_file="batch.json" attribute_names_json_file="attribute_names.json" attributes_values_json_file="attribute_values.json" echo_repeat "*" 88 echo echo "Welcome to the Amazon DynamoDB getting started demo." echo echo_repeat "*" 88 echo local table_name echo -n "Enter a name for a new DynamoDB table: " get_input table_name=$get_input_result echo '[ {"AttributeName": "year", "KeyType": "HASH"}, {"AttributeName": "title", "KeyType": "RANGE"} ]' >"$key_schema_json_file" echo '[ {"AttributeName": "year", "AttributeType": "N"}, {"AttributeName": "title", "AttributeType": "S"} ]' >"$attribute_definitions_json_file" if dynamodb_create_table -n "$table_name" -a "$attribute_definitions_json_file" \ -k "$key_schema_json_file" 1>/dev/null; then echo "Created a DynamoDB table named $table_name" else errecho "The table failed to create. This demo will exit." clean_up return 1 fi echo "Waiting for the table to become active...." if dynamodb_wait_table_active -n "$table_name"; then echo "The table is now active." else errecho "The table failed to become active. This demo will exit." cleanup "$table_name" return 1 fi echo echo_repeat "*" 88 echo echo -n "Enter the title of a movie you want to add to the table: " get_input local added_title added_title=$get_input_result local added_year get_int_input "What year was it released? " added_year=$get_input_result local rating get_float_input "On a scale of 1 - 10, how do you rate it? " "1" "10" rating=$get_input_result local plot echo -n "Summarize the plot for me: " get_input plot=$get_input_result echo '{ "year": {"N" :"'"$added_year"'"}, "title": {"S" : "'"$added_title"'"}, "info": {"M" : {"plot": {"S" : "'"$plot"'"}, "rating": {"N" :"'"$rating"'"} } } }' >"$item_json_file" if dynamodb_put_item -n "$table_name" -i "$item_json_file"; then echo "The movie '$added_title' was successfully added to the table '$table_name'." else errecho "Put item failed. This demo will exit." clean_up "$table_name" return 1 fi echo echo_repeat "*" 88 echo echo "Let's update your movie '$added_title'." get_float_input "You rated it $rating, what new rating would you give it? " "1" "10" rating=$get_input_result echo -n "You summarized the plot as '$plot'." echo "What would you say now? " get_input plot=$get_input_result echo '{ "year": {"N" :"'"$added_year"'"}, "title": {"S" : "'"$added_title"'"} }' >"$key_json_file" echo '{ ":r": {"N" :"'"$rating"'"}, ":p": {"S" : "'"$plot"'"} }' >"$item_json_file" local update_expression="SET info.rating = :r, info.plot = :p" if dynamodb_update_item -n "$table_name" -k "$key_json_file" -e "$update_expression" -v "$item_json_file"; then echo "Updated '$added_title' with new attributes." else errecho "Update item failed. This demo will exit." clean_up "$table_name" return 1 fi echo echo_repeat "*" 88 echo echo "We will now use batch write to upload 150 movie entries into the table." local batch_json for batch_json in movie_files/movies_*.json; do echo "{ \"$table_name\" : $(<"$batch_json") }" >"$batch_json_file" if dynamodb_batch_write_item -i "$batch_json_file" 1>/dev/null; then echo "Entries in $batch_json added to table." else errecho "Batch write failed. This demo will exit." clean_up "$table_name" return 1 fi done local title="The Lord of the Rings: The Fellowship of the Ring" local year="2001" if get_yes_no_input "Let's move on...do you want to get info about '$title'? (y/n) "; then echo '{ "year": {"N" :"'"$year"'"}, "title": {"S" : "'"$title"'"} }' >"$key_json_file" local info info=$(dynamodb_get_item -n "$table_name" -k "$key_json_file") # shellcheck disable=SC2181 if [[ ${?} -ne 0 ]]; then errecho "Get item failed. This demo will exit." clean_up "$table_name" return 1 fi echo "Here is what I found:" echo "$info" fi local ask_for_year=true while [[ "$ask_for_year" == true ]]; do echo "Let's get a list of movies released in a given year." get_int_input "Enter a year between 1972 and 2018: " "1972" "2018" year=$get_input_result echo '{ "#n": "year" }' >"$attribute_names_json_file" echo '{ ":v": {"N" :"'"$year"'"} }' >"$attributes_values_json_file" response=$(dynamodb_query -n "$table_name" -k "#n=:v" -a "$attribute_names_json_file" -v "$attributes_values_json_file") # shellcheck disable=SC2181 if [[ ${?} -ne 0 ]]; then errecho "Query table failed. This demo will exit." clean_up "$table_name" return 1 fi echo "Here is what I found:" echo "$response" if ! get_yes_no_input "Try another year? (y/n) "; then ask_for_year=false fi done echo "Now let's scan for movies released in a range of years. Enter a year: " get_int_input "Enter a year between 1972 and 2018: " "1972" "2018" local start=$get_input_result get_int_input "Enter another year: " "1972" "2018" local end=$get_input_result echo '{ "#n": "year" }' >"$attribute_names_json_file" echo '{ ":v1": {"N" : "'"$start"'"}, ":v2": {"N" : "'"$end"'"} }' >"$attributes_values_json_file" response=$(dynamodb_scan -n "$table_name" -f "#n BETWEEN :v1 AND :v2" -a "$attribute_names_json_file" -v "$attributes_values_json_file") # shellcheck disable=SC2181 if [[ ${?} -ne 0 ]]; then errecho "Scan table failed. This demo will exit." clean_up "$table_name" return 1 fi echo "Here is what I found:" echo "$response" echo echo_repeat "*" 88 echo echo "Let's remove your movie '$added_title' from the table." if get_yes_no_input "Do you want to remove '$added_title'? (y/n) "; then echo '{ "year": {"N" :"'"$added_year"'"}, "title": {"S" : "'"$added_title"'"} }' >"$key_json_file" if ! dynamodb_delete_item -n "$table_name" -k "$key_json_file"; then errecho "Delete item failed. This demo will exit." clean_up "$table_name" return 1 fi fi if get_yes_no_input "Do you want to delete the table '$table_name'? (y/n) "; then if ! clean_up "$table_name"; then return 1 fi else if ! clean_up; then return 1 fi fi return 0 }Die in diesem Szenario verwendeten „DynamoDB“-Funktionen.
############################################################################### # function dynamodb_create_table # # This function creates an Amazon DynamoDB table. # # Parameters: # -n table_name -- The name of the table to create. # -a attribute_definitions -- JSON file path of a list of attributes and their types. # -k key_schema -- JSON file path of a list of attributes and their key types. # # Returns: # 0 - If successful. # 1 - If it fails. ############################################################################### function dynamodb_create_table() { local table_name attribute_definitions key_schema response local option OPTARG # Required to use getopts command in a function. ####################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_create_table" echo "Creates an Amazon DynamoDB table with on-demand billing." echo " -n table_name -- The name of the table to create." echo " -a attribute_definitions -- JSON file path of a list of attributes and their types." echo " -k key_schema -- JSON file path of a list of attributes and their key types." echo "" } # Retrieve the calling parameters. while getopts "n:a:k:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; a) attribute_definitions="${OPTARG}" ;; k) key_schema="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$attribute_definitions" ]]; then errecho "ERROR: You must provide an attribute definitions json file path the -a parameter." usage return 1 fi if [[ -z "$key_schema" ]]; then errecho "ERROR: You must provide a key schema json file path the -k parameter." usage return 1 fi iecho "Parameters:\n" iecho " table_name: $table_name" iecho " attribute_definitions: $attribute_definitions" iecho " key_schema: $key_schema" iecho "" response=$(aws dynamodb create-table \ --table-name "$table_name" \ --attribute-definitions file://"$attribute_definitions" \ --billing-mode PAY_PER_REQUEST \ --key-schema file://"$key_schema" ) local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports create-table operation failed.$response" return 1 fi return 0 } ############################################################################### # function dynamodb_describe_table # # This function returns the status of a DynamoDB table. # # Parameters: # -n table_name -- The name of the table. # # Response: # - TableStatus: # And: # 0 - Table is active. # 1 - If it fails. ############################################################################### function dynamodb_describe_table { local table_name local option OPTARG # Required to use getopts command in a function. ####################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_describe_table" echo "Describe the status of a DynamoDB table." echo " -n table_name -- The name of the table." echo "" } # Retrieve the calling parameters. while getopts "n:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi local table_status table_status=$( aws dynamodb describe-table \ --table-name "$table_name" \ --output text \ --query 'Table.TableStatus' ) local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log "$error_code" errecho "ERROR: AWS reports describe-table operation failed.$table_status" return 1 fi echo "$table_status" return 0 } ############################################################################## # function dynamodb_put_item # # This function puts an item into a DynamoDB table. # # Parameters: # -n table_name -- The name of the table. # -i item -- Path to json file containing the item values. # # Returns: # 0 - If successful. # 1 - If it fails. ############################################################################## function dynamodb_put_item() { local table_name item response local option OPTARG # Required to use getopts command in a function. ####################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_put_item" echo "Put an item into a DynamoDB table." echo " -n table_name -- The name of the table." echo " -i item -- Path to json file containing the item values." echo "" } while getopts "n:i:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; i) item="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$item" ]]; then errecho "ERROR: You must provide an item with the -i parameter." usage return 1 fi iecho "Parameters:\n" iecho " table_name: $table_name" iecho " item: $item" iecho "" iecho "" response=$(aws dynamodb put-item \ --table-name "$table_name" \ --item file://"$item") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports put-item operation failed.$response" return 1 fi return 0 } ############################################################################## # function dynamodb_update_item # # This function updates an item in a DynamoDB table. # # # Parameters: # -n table_name -- The name of the table. # -k keys -- Path to json file containing the keys that identify the item to update. # -e update expression -- An expression that defines one or more attributes to be updated. # -v values -- Path to json file containing the update values. # # Returns: # 0 - If successful. # 1 - If it fails. ############################################################################# function dynamodb_update_item() { local table_name keys update_expression values response local option OPTARG # Required to use getopts command in a function. ####################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_update_item" echo "Update an item in a DynamoDB table." echo " -n table_name -- The name of the table." echo " -k keys -- Path to json file containing the keys that identify the item to update." echo " -e update expression -- An expression that defines one or more attributes to be updated." echo " -v values -- Path to json file containing the update values." echo "" } while getopts "n:k:e:v:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; k) keys="${OPTARG}" ;; e) update_expression="${OPTARG}" ;; v) values="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$keys" ]]; then errecho "ERROR: You must provide a keys json file path the -k parameter." usage return 1 fi if [[ -z "$update_expression" ]]; then errecho "ERROR: You must provide an update expression with the -e parameter." usage return 1 fi if [[ -z "$values" ]]; then errecho "ERROR: You must provide a values json file path the -v parameter." usage return 1 fi iecho "Parameters:\n" iecho " table_name: $table_name" iecho " keys: $keys" iecho " update_expression: $update_expression" iecho " values: $values" response=$(aws dynamodb update-item \ --table-name "$table_name" \ --key file://"$keys" \ --update-expression "$update_expression" \ --expression-attribute-values file://"$values") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports update-item operation failed.$response" return 1 fi return 0 } ############################################################################## # function dynamodb_batch_write_item # # This function writes a batch of items into a DynamoDB table. # # Parameters: # -i item -- Path to json file containing the items to write. # # Returns: # 0 - If successful. # 1 - If it fails. ############################################################################ function dynamodb_batch_write_item() { local item response local option OPTARG # Required to use getopts command in a function. ####################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_batch_write_item" echo "Write a batch of items into a DynamoDB table." echo " -i item -- Path to json file containing the items to write." echo "" } while getopts "i:h" option; do case "${option}" in i) item="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$item" ]]; then errecho "ERROR: You must provide an item with the -i parameter." usage return 1 fi iecho "Parameters:\n" iecho " table_name: $table_name" iecho " item: $item" iecho "" response=$(aws dynamodb batch-write-item \ --request-items file://"$item") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports batch-write-item operation failed.$response" return 1 fi return 0 } ############################################################################# # function dynamodb_get_item # # This function gets an item from a DynamoDB table. # # Parameters: # -n table_name -- The name of the table. # -k keys -- Path to json file containing the keys that identify the item to get. # [-q query] -- Optional JMESPath query expression. # # Returns: # The item as text output. # And: # 0 - If successful. # 1 - If it fails. ############################################################################ function dynamodb_get_item() { local table_name keys query response local option OPTARG # Required to use getopts command in a function. # ###################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_get_item" echo "Get an item from a DynamoDB table." echo " -n table_name -- The name of the table." echo " -k keys -- Path to json file containing the keys that identify the item to get." echo " [-q query] -- Optional JMESPath query expression." echo "" } query="" while getopts "n:k:q:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; k) keys="${OPTARG}" ;; q) query="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$keys" ]]; then errecho "ERROR: You must provide a keys json file path the -k parameter." usage return 1 fi if [[ -n "$query" ]]; then response=$(aws dynamodb get-item \ --table-name "$table_name" \ --key file://"$keys" \ --output text \ --query "$query") else response=$( aws dynamodb get-item \ --table-name "$table_name" \ --key file://"$keys" \ --output text ) fi local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports get-item operation failed.$response" return 1 fi if [[ -n "$query" ]]; then echo "$response" | sed "/^\t/s/\t//1" # Remove initial tab that the JMSEPath query inserts on some strings. else echo "$response" fi return 0 } ############################################################################# # function dynamodb_query # # This function queries a DynamoDB table. # # Parameters: # -n table_name -- The name of the table. # -k key_condition_expression -- The key condition expression. # -a attribute_names -- Path to JSON file containing the attribute names. # -v attribute_values -- Path to JSON file containing the attribute values. # [-p projection_expression] -- Optional projection expression. # # Returns: # The items as json output. # And: # 0 - If successful. # 1 - If it fails. ########################################################################### function dynamodb_query() { local table_name key_condition_expression attribute_names attribute_values projection_expression response local option OPTARG # Required to use getopts command in a function. # ###################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_query" echo "Query a DynamoDB table." echo " -n table_name -- The name of the table." echo " -k key_condition_expression -- The key condition expression." echo " -a attribute_names -- Path to JSON file containing the attribute names." echo " -v attribute_values -- Path to JSON file containing the attribute values." echo " [-p projection_expression] -- Optional projection expression." echo "" } while getopts "n:k:a:v:p:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; k) key_condition_expression="${OPTARG}" ;; a) attribute_names="${OPTARG}" ;; v) attribute_values="${OPTARG}" ;; p) projection_expression="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$key_condition_expression" ]]; then errecho "ERROR: You must provide a key condition expression with the -k parameter." usage return 1 fi if [[ -z "$attribute_names" ]]; then errecho "ERROR: You must provide a attribute names with the -a parameter." usage return 1 fi if [[ -z "$attribute_values" ]]; then errecho "ERROR: You must provide a attribute values with the -v parameter." usage return 1 fi if [[ -z "$projection_expression" ]]; then response=$(aws dynamodb query \ --table-name "$table_name" \ --key-condition-expression "$key_condition_expression" \ --expression-attribute-names file://"$attribute_names" \ --expression-attribute-values file://"$attribute_values") else response=$(aws dynamodb query \ --table-name "$table_name" \ --key-condition-expression "$key_condition_expression" \ --expression-attribute-names file://"$attribute_names" \ --expression-attribute-values file://"$attribute_values" \ --projection-expression "$projection_expression") fi local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports query operation failed.$response" return 1 fi echo "$response" return 0 } ############################################################################# # function dynamodb_scan # # This function scans a DynamoDB table. # # Parameters: # -n table_name -- The name of the table. # -f filter_expression -- The filter expression. # -a expression_attribute_names -- Path to JSON file containing the expression attribute names. # -v expression_attribute_values -- Path to JSON file containing the expression attribute values. # [-p projection_expression] -- Optional projection expression. # # Returns: # The items as json output. # And: # 0 - If successful. # 1 - If it fails. ########################################################################### function dynamodb_scan() { local table_name filter_expression expression_attribute_names expression_attribute_values projection_expression response local option OPTARG # Required to use getopts command in a function. # ###################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_scan" echo "Scan a DynamoDB table." echo " -n table_name -- The name of the table." echo " -f filter_expression -- The filter expression." echo " -a expression_attribute_names -- Path to JSON file containing the expression attribute names." echo " -v expression_attribute_values -- Path to JSON file containing the expression attribute values." echo " [-p projection_expression] -- Optional projection expression." echo "" } while getopts "n:f:a:v:p:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; f) filter_expression="${OPTARG}" ;; a) expression_attribute_names="${OPTARG}" ;; v) expression_attribute_values="${OPTARG}" ;; p) projection_expression="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$filter_expression" ]]; then errecho "ERROR: You must provide a filter expression with the -f parameter." usage return 1 fi if [[ -z "$expression_attribute_names" ]]; then errecho "ERROR: You must provide expression attribute names with the -a parameter." usage return 1 fi if [[ -z "$expression_attribute_values" ]]; then errecho "ERROR: You must provide expression attribute values with the -v parameter." usage return 1 fi if [[ -z "$projection_expression" ]]; then response=$(aws dynamodb scan \ --table-name "$table_name" \ --filter-expression "$filter_expression" \ --expression-attribute-names file://"$expression_attribute_names" \ --expression-attribute-values file://"$expression_attribute_values") else response=$(aws dynamodb scan \ --table-name "$table_name" \ --filter-expression "$filter_expression" \ --expression-attribute-names file://"$expression_attribute_names" \ --expression-attribute-values file://"$expression_attribute_values" \ --projection-expression "$projection_expression") fi local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports scan operation failed.$response" return 1 fi echo "$response" return 0 } ############################################################################## # function dynamodb_delete_item # # This function deletes an item from a DynamoDB table. # # Parameters: # -n table_name -- The name of the table. # -k keys -- Path to json file containing the keys that identify the item to delete. # # Returns: # 0 - If successful. # 1 - If it fails. ########################################################################### function dynamodb_delete_item() { local table_name keys response local option OPTARG # Required to use getopts command in a function. # ###################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_delete_item" echo "Delete an item from a DynamoDB table." echo " -n table_name -- The name of the table." echo " -k keys -- Path to json file containing the keys that identify the item to delete." echo "" } while getopts "n:k:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; k) keys="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$keys" ]]; then errecho "ERROR: You must provide a keys json file path the -k parameter." usage return 1 fi iecho "Parameters:\n" iecho " table_name: $table_name" iecho " keys: $keys" iecho "" response=$(aws dynamodb delete-item \ --table-name "$table_name" \ --key file://"$keys") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports delete-item operation failed.$response" return 1 fi return 0 } ############################################################################### # function dynamodb_delete_table # # This function deletes a DynamoDB table. # # Parameters: # -n table_name -- The name of the table to delete. # # Returns: # 0 - If successful. # 1 - If it fails. ############################################################################### function dynamodb_delete_table() { local table_name response local option OPTARG # Required to use getopts command in a function. # bashsupport disable=BP5008 function usage() { echo "function dynamodb_delete_table" echo "Deletes an Amazon DynamoDB table." echo " -n table_name -- The name of the table to delete." echo "" } # Retrieve the calling parameters. while getopts "n:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi iecho "Parameters:\n" iecho " table_name: $table_name" iecho "" response=$(aws dynamodb delete-table \ --table-name "$table_name") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports delete-table operation failed.$response" return 1 fi return 0 }Die in diesem Szenario verwendeten Dienstprogrammfunktionen.
############################################################################### # function iecho # # This function enables the script to display the specified text only if # the global variable $VERBOSE is set to true. ############################################################################### function iecho() { if [[ $VERBOSE == true ]]; then echo "$@" fi } ############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
API-Details finden Sie in den folgenden Themen der AWS CLI-Befehlsreferenz.
-
Aktionen
Das folgende Codebeispiel zeigt, wie BatchGetItem verwendet wird.
- AWS CLI mit Bash-Skript
-
Anmerkung
Auf GitHub finden Sie noch mehr. Hier finden Sie das vollständige Beispiel und erfahren, wie Sie das AWS-Codebeispiel
einrichten und ausführen. ############################################################################# # function dynamodb_batch_get_item # # This function gets a batch of items from a DynamoDB table. # # Parameters: # -i item -- Path to json file containing the keys of the items to get. # # Returns: # The items as json output. # And: # 0 - If successful. # 1 - If it fails. ########################################################################## function dynamodb_batch_get_item() { local item response local option OPTARG # Required to use getopts command in a function. ####################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_batch_get_item" echo "Get a batch of items from a DynamoDB table." echo " -i item -- Path to json file containing the keys of the items to get." echo "" } while getopts "i:h" option; do case "${option}" in i) item="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$item" ]]; then errecho "ERROR: You must provide an item with the -i parameter." usage return 1 fi response=$(aws dynamodb batch-get-item \ --request-items file://"$item") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports batch-get-item operation failed.$response" return 1 fi echo "$response" return 0 }Die in diesem Beispiel verwendeten Dienstprogrammfunktionen.
############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
API-Details finden Sie unter BatchGetItem in der AWS CLI-Befehlsreferenz.
-
Das folgende Codebeispiel zeigt, wie BatchWriteItem verwendet wird.
- AWS CLI mit Bash-Skript
-
Anmerkung
Auf GitHub finden Sie noch mehr. Hier finden Sie das vollständige Beispiel und erfahren, wie Sie das AWS-Codebeispiel
einrichten und ausführen. ############################################################################## # function dynamodb_batch_write_item # # This function writes a batch of items into a DynamoDB table. # # Parameters: # -i item -- Path to json file containing the items to write. # # Returns: # 0 - If successful. # 1 - If it fails. ############################################################################ function dynamodb_batch_write_item() { local item response local option OPTARG # Required to use getopts command in a function. ####################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_batch_write_item" echo "Write a batch of items into a DynamoDB table." echo " -i item -- Path to json file containing the items to write." echo "" } while getopts "i:h" option; do case "${option}" in i) item="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$item" ]]; then errecho "ERROR: You must provide an item with the -i parameter." usage return 1 fi iecho "Parameters:\n" iecho " table_name: $table_name" iecho " item: $item" iecho "" response=$(aws dynamodb batch-write-item \ --request-items file://"$item") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports batch-write-item operation failed.$response" return 1 fi return 0 }Die in diesem Beispiel verwendeten Dienstprogrammfunktionen.
############################################################################### # function iecho # # This function enables the script to display the specified text only if # the global variable $VERBOSE is set to true. ############################################################################### function iecho() { if [[ $VERBOSE == true ]]; then echo "$@" fi } ############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
API-Details finden Sie unter BatchWriteItem in der AWS CLI-Befehlsreferenz.
-
Das folgende Codebeispiel zeigt, wie CreateTable verwendet wird.
- AWS CLI mit Bash-Skript
-
Anmerkung
Auf GitHub finden Sie noch mehr. Hier finden Sie das vollständige Beispiel und erfahren, wie Sie das AWS-Codebeispiel
einrichten und ausführen. ############################################################################### # function dynamodb_create_table # # This function creates an Amazon DynamoDB table. # # Parameters: # -n table_name -- The name of the table to create. # -a attribute_definitions -- JSON file path of a list of attributes and their types. # -k key_schema -- JSON file path of a list of attributes and their key types. # # Returns: # 0 - If successful. # 1 - If it fails. ############################################################################### function dynamodb_create_table() { local table_name attribute_definitions key_schema response local option OPTARG # Required to use getopts command in a function. ####################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_create_table" echo "Creates an Amazon DynamoDB table with on-demand billing." echo " -n table_name -- The name of the table to create." echo " -a attribute_definitions -- JSON file path of a list of attributes and their types." echo " -k key_schema -- JSON file path of a list of attributes and their key types." echo "" } # Retrieve the calling parameters. while getopts "n:a:k:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; a) attribute_definitions="${OPTARG}" ;; k) key_schema="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$attribute_definitions" ]]; then errecho "ERROR: You must provide an attribute definitions json file path the -a parameter." usage return 1 fi if [[ -z "$key_schema" ]]; then errecho "ERROR: You must provide a key schema json file path the -k parameter." usage return 1 fi iecho "Parameters:\n" iecho " table_name: $table_name" iecho " attribute_definitions: $attribute_definitions" iecho " key_schema: $key_schema" iecho "" response=$(aws dynamodb create-table \ --table-name "$table_name" \ --attribute-definitions file://"$attribute_definitions" \ --billing-mode PAY_PER_REQUEST \ --key-schema file://"$key_schema" ) local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports create-table operation failed.$response" return 1 fi return 0 }Die in diesem Beispiel verwendeten Dienstprogrammfunktionen.
############################################################################### # function iecho # # This function enables the script to display the specified text only if # the global variable $VERBOSE is set to true. ############################################################################### function iecho() { if [[ $VERBOSE == true ]]; then echo "$@" fi } ############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
API-Details finden Sie unter CreateTable in der AWS CLI-Befehlsreferenz.
-
Das folgende Codebeispiel zeigt, wie DeleteItem verwendet wird.
- AWS CLI mit Bash-Skript
-
Anmerkung
Auf GitHub finden Sie noch mehr. Hier finden Sie das vollständige Beispiel und erfahren, wie Sie das AWS-Codebeispiel
einrichten und ausführen. ############################################################################## # function dynamodb_delete_item # # This function deletes an item from a DynamoDB table. # # Parameters: # -n table_name -- The name of the table. # -k keys -- Path to json file containing the keys that identify the item to delete. # # Returns: # 0 - If successful. # 1 - If it fails. ########################################################################### function dynamodb_delete_item() { local table_name keys response local option OPTARG # Required to use getopts command in a function. # ###################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_delete_item" echo "Delete an item from a DynamoDB table." echo " -n table_name -- The name of the table." echo " -k keys -- Path to json file containing the keys that identify the item to delete." echo "" } while getopts "n:k:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; k) keys="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$keys" ]]; then errecho "ERROR: You must provide a keys json file path the -k parameter." usage return 1 fi iecho "Parameters:\n" iecho " table_name: $table_name" iecho " keys: $keys" iecho "" response=$(aws dynamodb delete-item \ --table-name "$table_name" \ --key file://"$keys") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports delete-item operation failed.$response" return 1 fi return 0 }Die in diesem Beispiel verwendeten Dienstprogrammfunktionen.
############################################################################### # function iecho # # This function enables the script to display the specified text only if # the global variable $VERBOSE is set to true. ############################################################################### function iecho() { if [[ $VERBOSE == true ]]; then echo "$@" fi } ############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
API-Details finden Sie unter DeleteItem in der AWS CLI-Befehlsreferenz.
-
Das folgende Codebeispiel zeigt, wie DeleteTable verwendet wird.
- AWS CLI mit Bash-Skript
-
Anmerkung
Auf GitHub finden Sie noch mehr. Hier finden Sie das vollständige Beispiel und erfahren, wie Sie das AWS-Codebeispiel
einrichten und ausführen. ############################################################################### # function dynamodb_delete_table # # This function deletes a DynamoDB table. # # Parameters: # -n table_name -- The name of the table to delete. # # Returns: # 0 - If successful. # 1 - If it fails. ############################################################################### function dynamodb_delete_table() { local table_name response local option OPTARG # Required to use getopts command in a function. # bashsupport disable=BP5008 function usage() { echo "function dynamodb_delete_table" echo "Deletes an Amazon DynamoDB table." echo " -n table_name -- The name of the table to delete." echo "" } # Retrieve the calling parameters. while getopts "n:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi iecho "Parameters:\n" iecho " table_name: $table_name" iecho "" response=$(aws dynamodb delete-table \ --table-name "$table_name") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports delete-table operation failed.$response" return 1 fi return 0 }Die in diesem Beispiel verwendeten Dienstprogrammfunktionen.
############################################################################### # function iecho # # This function enables the script to display the specified text only if # the global variable $VERBOSE is set to true. ############################################################################### function iecho() { if [[ $VERBOSE == true ]]; then echo "$@" fi } ############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
API-Details finden Sie unter DeleteTable in der AWS CLI-Befehlsreferenz.
-
Das folgende Codebeispiel zeigt, wie DescribeTable verwendet wird.
- AWS CLI mit Bash-Skript
-
Anmerkung
Auf GitHub finden Sie noch mehr. Hier finden Sie das vollständige Beispiel und erfahren, wie Sie das AWS-Codebeispiel
einrichten und ausführen. ############################################################################### # function dynamodb_describe_table # # This function returns the status of a DynamoDB table. # # Parameters: # -n table_name -- The name of the table. # # Response: # - TableStatus: # And: # 0 - Table is active. # 1 - If it fails. ############################################################################### function dynamodb_describe_table { local table_name local option OPTARG # Required to use getopts command in a function. ####################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_describe_table" echo "Describe the status of a DynamoDB table." echo " -n table_name -- The name of the table." echo "" } # Retrieve the calling parameters. while getopts "n:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi local table_status table_status=$( aws dynamodb describe-table \ --table-name "$table_name" \ --output text \ --query 'Table.TableStatus' ) local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log "$error_code" errecho "ERROR: AWS reports describe-table operation failed.$table_status" return 1 fi echo "$table_status" return 0 }Die in diesem Beispiel verwendeten Dienstprogrammfunktionen.
############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
API-Details finden Sie unter DescribeTable in der AWS CLI-Befehlsreferenz.
-
Das folgende Codebeispiel zeigt, wie GetItem verwendet wird.
- AWS CLI mit Bash-Skript
-
Anmerkung
Auf GitHub finden Sie noch mehr. Hier finden Sie das vollständige Beispiel und erfahren, wie Sie das AWS-Codebeispiel
einrichten und ausführen. ############################################################################# # function dynamodb_get_item # # This function gets an item from a DynamoDB table. # # Parameters: # -n table_name -- The name of the table. # -k keys -- Path to json file containing the keys that identify the item to get. # [-q query] -- Optional JMESPath query expression. # # Returns: # The item as text output. # And: # 0 - If successful. # 1 - If it fails. ############################################################################ function dynamodb_get_item() { local table_name keys query response local option OPTARG # Required to use getopts command in a function. # ###################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_get_item" echo "Get an item from a DynamoDB table." echo " -n table_name -- The name of the table." echo " -k keys -- Path to json file containing the keys that identify the item to get." echo " [-q query] -- Optional JMESPath query expression." echo "" } query="" while getopts "n:k:q:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; k) keys="${OPTARG}" ;; q) query="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$keys" ]]; then errecho "ERROR: You must provide a keys json file path the -k parameter." usage return 1 fi if [[ -n "$query" ]]; then response=$(aws dynamodb get-item \ --table-name "$table_name" \ --key file://"$keys" \ --output text \ --query "$query") else response=$( aws dynamodb get-item \ --table-name "$table_name" \ --key file://"$keys" \ --output text ) fi local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports get-item operation failed.$response" return 1 fi if [[ -n "$query" ]]; then echo "$response" | sed "/^\t/s/\t//1" # Remove initial tab that the JMSEPath query inserts on some strings. else echo "$response" fi return 0 }Die in diesem Beispiel verwendeten Dienstprogrammfunktionen.
############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
API-Details finden Sie unter GetItem in der AWS CLI-Befehlsreferenz.
-
Das folgende Codebeispiel zeigt, wie ListTables verwendet wird.
- AWS CLI mit Bash-Skript
-
Anmerkung
Auf GitHub finden Sie noch mehr. Hier finden Sie das vollständige Beispiel und erfahren, wie Sie das AWS-Codebeispiel
einrichten und ausführen. ############################################################################## # function dynamodb_list_tables # # This function lists all the tables in a DynamoDB. # # Returns: # 0 - If successful. # 1 - If it fails. ########################################################################### function dynamodb_list_tables() { response=$(aws dynamodb list-tables \ --output text \ --query "TableNames") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports batch-write-item operation failed.$response" return 1 fi echo "$response" | tr -s "[:space:]" "\n" return 0 }Die in diesem Beispiel verwendeten Dienstprogrammfunktionen.
############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
API-Details finden Sie unter ListTables in der AWS CLI-Befehlsreferenz.
-
Das folgende Codebeispiel zeigt, wie PutItem verwendet wird.
- AWS CLI mit Bash-Skript
-
Anmerkung
Auf GitHub finden Sie noch mehr. Hier finden Sie das vollständige Beispiel und erfahren, wie Sie das AWS-Codebeispiel
einrichten und ausführen. ############################################################################## # function dynamodb_put_item # # This function puts an item into a DynamoDB table. # # Parameters: # -n table_name -- The name of the table. # -i item -- Path to json file containing the item values. # # Returns: # 0 - If successful. # 1 - If it fails. ############################################################################## function dynamodb_put_item() { local table_name item response local option OPTARG # Required to use getopts command in a function. ####################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_put_item" echo "Put an item into a DynamoDB table." echo " -n table_name -- The name of the table." echo " -i item -- Path to json file containing the item values." echo "" } while getopts "n:i:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; i) item="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$item" ]]; then errecho "ERROR: You must provide an item with the -i parameter." usage return 1 fi iecho "Parameters:\n" iecho " table_name: $table_name" iecho " item: $item" iecho "" iecho "" response=$(aws dynamodb put-item \ --table-name "$table_name" \ --item file://"$item") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports put-item operation failed.$response" return 1 fi return 0 }Die in diesem Beispiel verwendeten Dienstprogrammfunktionen.
############################################################################### # function iecho # # This function enables the script to display the specified text only if # the global variable $VERBOSE is set to true. ############################################################################### function iecho() { if [[ $VERBOSE == true ]]; then echo "$@" fi } ############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
API-Details finden Sie unter PutItem in der AWS CLI-Befehlsreferenz.
-
Das folgende Codebeispiel zeigt, wie Query verwendet wird.
- AWS CLI mit Bash-Skript
-
Anmerkung
Auf GitHub finden Sie noch mehr. Hier finden Sie das vollständige Beispiel und erfahren, wie Sie das AWS-Codebeispiel
einrichten und ausführen. ############################################################################# # function dynamodb_query # # This function queries a DynamoDB table. # # Parameters: # -n table_name -- The name of the table. # -k key_condition_expression -- The key condition expression. # -a attribute_names -- Path to JSON file containing the attribute names. # -v attribute_values -- Path to JSON file containing the attribute values. # [-p projection_expression] -- Optional projection expression. # # Returns: # The items as json output. # And: # 0 - If successful. # 1 - If it fails. ########################################################################### function dynamodb_query() { local table_name key_condition_expression attribute_names attribute_values projection_expression response local option OPTARG # Required to use getopts command in a function. # ###################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_query" echo "Query a DynamoDB table." echo " -n table_name -- The name of the table." echo " -k key_condition_expression -- The key condition expression." echo " -a attribute_names -- Path to JSON file containing the attribute names." echo " -v attribute_values -- Path to JSON file containing the attribute values." echo " [-p projection_expression] -- Optional projection expression." echo "" } while getopts "n:k:a:v:p:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; k) key_condition_expression="${OPTARG}" ;; a) attribute_names="${OPTARG}" ;; v) attribute_values="${OPTARG}" ;; p) projection_expression="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$key_condition_expression" ]]; then errecho "ERROR: You must provide a key condition expression with the -k parameter." usage return 1 fi if [[ -z "$attribute_names" ]]; then errecho "ERROR: You must provide a attribute names with the -a parameter." usage return 1 fi if [[ -z "$attribute_values" ]]; then errecho "ERROR: You must provide a attribute values with the -v parameter." usage return 1 fi if [[ -z "$projection_expression" ]]; then response=$(aws dynamodb query \ --table-name "$table_name" \ --key-condition-expression "$key_condition_expression" \ --expression-attribute-names file://"$attribute_names" \ --expression-attribute-values file://"$attribute_values") else response=$(aws dynamodb query \ --table-name "$table_name" \ --key-condition-expression "$key_condition_expression" \ --expression-attribute-names file://"$attribute_names" \ --expression-attribute-values file://"$attribute_values" \ --projection-expression "$projection_expression") fi local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports query operation failed.$response" return 1 fi echo "$response" return 0 }Die in diesem Beispiel verwendeten Dienstprogrammfunktionen.
############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
API-Details finden Sie unter Query in der AWS CLI-Befehlsreferenz.
-
Das folgende Codebeispiel zeigt, wie Scan verwendet wird.
- AWS CLI mit Bash-Skript
-
Anmerkung
Auf GitHub finden Sie noch mehr. Hier finden Sie das vollständige Beispiel und erfahren, wie Sie das AWS-Codebeispiel
einrichten und ausführen. ############################################################################# # function dynamodb_scan # # This function scans a DynamoDB table. # # Parameters: # -n table_name -- The name of the table. # -f filter_expression -- The filter expression. # -a expression_attribute_names -- Path to JSON file containing the expression attribute names. # -v expression_attribute_values -- Path to JSON file containing the expression attribute values. # [-p projection_expression] -- Optional projection expression. # # Returns: # The items as json output. # And: # 0 - If successful. # 1 - If it fails. ########################################################################### function dynamodb_scan() { local table_name filter_expression expression_attribute_names expression_attribute_values projection_expression response local option OPTARG # Required to use getopts command in a function. # ###################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_scan" echo "Scan a DynamoDB table." echo " -n table_name -- The name of the table." echo " -f filter_expression -- The filter expression." echo " -a expression_attribute_names -- Path to JSON file containing the expression attribute names." echo " -v expression_attribute_values -- Path to JSON file containing the expression attribute values." echo " [-p projection_expression] -- Optional projection expression." echo "" } while getopts "n:f:a:v:p:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; f) filter_expression="${OPTARG}" ;; a) expression_attribute_names="${OPTARG}" ;; v) expression_attribute_values="${OPTARG}" ;; p) projection_expression="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$filter_expression" ]]; then errecho "ERROR: You must provide a filter expression with the -f parameter." usage return 1 fi if [[ -z "$expression_attribute_names" ]]; then errecho "ERROR: You must provide expression attribute names with the -a parameter." usage return 1 fi if [[ -z "$expression_attribute_values" ]]; then errecho "ERROR: You must provide expression attribute values with the -v parameter." usage return 1 fi if [[ -z "$projection_expression" ]]; then response=$(aws dynamodb scan \ --table-name "$table_name" \ --filter-expression "$filter_expression" \ --expression-attribute-names file://"$expression_attribute_names" \ --expression-attribute-values file://"$expression_attribute_values") else response=$(aws dynamodb scan \ --table-name "$table_name" \ --filter-expression "$filter_expression" \ --expression-attribute-names file://"$expression_attribute_names" \ --expression-attribute-values file://"$expression_attribute_values" \ --projection-expression "$projection_expression") fi local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports scan operation failed.$response" return 1 fi echo "$response" return 0 }Die in diesem Beispiel verwendeten Dienstprogrammfunktionen.
############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
API-Details finden Sie unter Scan in der AWS CLI-Befehlsreferenz.
-
Das folgende Codebeispiel zeigt, wie UpdateItem verwendet wird.
- AWS CLI mit Bash-Skript
-
Anmerkung
Auf GitHub finden Sie noch mehr. Hier finden Sie das vollständige Beispiel und erfahren, wie Sie das AWS-Codebeispiel
einrichten und ausführen. ############################################################################## # function dynamodb_update_item # # This function updates an item in a DynamoDB table. # # # Parameters: # -n table_name -- The name of the table. # -k keys -- Path to json file containing the keys that identify the item to update. # -e update expression -- An expression that defines one or more attributes to be updated. # -v values -- Path to json file containing the update values. # # Returns: # 0 - If successful. # 1 - If it fails. ############################################################################# function dynamodb_update_item() { local table_name keys update_expression values response local option OPTARG # Required to use getopts command in a function. ####################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_update_item" echo "Update an item in a DynamoDB table." echo " -n table_name -- The name of the table." echo " -k keys -- Path to json file containing the keys that identify the item to update." echo " -e update expression -- An expression that defines one or more attributes to be updated." echo " -v values -- Path to json file containing the update values." echo "" } while getopts "n:k:e:v:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; k) keys="${OPTARG}" ;; e) update_expression="${OPTARG}" ;; v) values="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$keys" ]]; then errecho "ERROR: You must provide a keys json file path the -k parameter." usage return 1 fi if [[ -z "$update_expression" ]]; then errecho "ERROR: You must provide an update expression with the -e parameter." usage return 1 fi if [[ -z "$values" ]]; then errecho "ERROR: You must provide a values json file path the -v parameter." usage return 1 fi iecho "Parameters:\n" iecho " table_name: $table_name" iecho " keys: $keys" iecho " update_expression: $update_expression" iecho " values: $values" response=$(aws dynamodb update-item \ --table-name "$table_name" \ --key file://"$keys" \ --update-expression "$update_expression" \ --expression-attribute-values file://"$values") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports update-item operation failed.$response" return 1 fi return 0 }Die in diesem Beispiel verwendeten Dienstprogrammfunktionen.
############################################################################### # function iecho # # This function enables the script to display the specified text only if # the global variable $VERBOSE is set to true. ############################################################################### function iecho() { if [[ $VERBOSE == true ]]; then echo "$@" fi } ############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
API-Details finden Sie unter UpdateItem in der AWS CLI-Befehlsreferenz.
-
Szenarien
Das folgende Codebeispiel zeigt, wie Sie mit erweiterten Konfigurationen für globale sekundäre Indizes arbeiten.
Erstellen Sie eine Tabelle mit mehreren GSIs.
Erstellen Sie eine Tabelle mit On-Demand-Kapazität und einem GSI.
Fügen Sie Elemente in eine Tabelle mit mehreren GSIs ein.
Fragen Sie mehrere GSIs mit unterschiedlichen Bedingungen ab.
- AWS CLI mit Bash-Skript
-
Erstellen Sie eine Tabelle mit mehreren GSIs.
# Create a table with multiple GSIs aws dynamodb create-table \ --table-name MusicLibrary \ --attribute-definitions \ AttributeName=Artist,AttributeType=S \ AttributeName=SongTitle,AttributeType=S \ AttributeName=AlbumTitle,AttributeType=S \ AttributeName=Genre,AttributeType=S \ AttributeName=Year,AttributeType=N \ --key-schema \ AttributeName=Artist,KeyType=HASH \ AttributeName=SongTitle,KeyType=RANGE \ --billing-mode PAY_PER_REQUEST \ --global-secondary-indexes \ "[ { \"IndexName\": \"AlbumIndex\", \"KeySchema\": [{\"AttributeName\":\"AlbumTitle\",\"KeyType\":\"HASH\"}], \"Projection\": {\"ProjectionType\":\"ALL\"} }, { \"IndexName\": \"GenreYearIndex\", \"KeySchema\": [ {\"AttributeName\":\"Genre\",\"KeyType\":\"HASH\"}, {\"AttributeName\":\"Year\",\"KeyType\":\"RANGE\"} ], \"Projection\": {\"ProjectionType\":\"INCLUDE\",\"NonKeyAttributes\":[\"Artist\",\"SongTitle\"]} } ]"Erstellen Sie eine Tabelle mit On-Demand-Kapazität und einem GSI.
# Create a table with on-demand capacity and GSI aws dynamodb create-table \ --table-name MusicOnDemand \ --attribute-definitions \ AttributeName=Artist,AttributeType=S \ AttributeName=SongTitle,AttributeType=S \ AttributeName=Genre,AttributeType=S \ --key-schema \ AttributeName=Artist,KeyType=HASH \ AttributeName=SongTitle,KeyType=RANGE \ --billing-mode PAY_PER_REQUEST \ --global-secondary-indexes \ "[ { \"IndexName\": \"GenreIndex\", \"KeySchema\": [{\"AttributeName\":\"Genre\",\"KeyType\":\"HASH\"}], \"Projection\": {\"ProjectionType\":\"ALL\"} } ]"Fügen Sie Elemente in eine Tabelle mit mehreren GSIs ein.
# Add items to MusicLibrary table aws dynamodb put-item \ --table-name MusicLibrary \ --item '{ "Artist": {"S": "The Beatles"}, "SongTitle": {"S": "Hey Jude"}, "AlbumTitle": {"S": "Past Masters"}, "Genre": {"S": "Rock"}, "Year": {"N": "1968"} }' aws dynamodb put-item \ --table-name MusicLibrary \ --item '{ "Artist": {"S": "Miles Davis"}, "SongTitle": {"S": "So What"}, "AlbumTitle": {"S": "Kind of Blue"}, "Genre": {"S": "Jazz"}, "Year": {"N": "1959"} }'Fragen Sie Elemente aus einer Tabelle mit mehreren GSIs ab.
# Query the AlbumIndex GSI echo "Querying AlbumIndex GSI:" aws dynamodb query \ --table-name MusicLibrary \ --index-name AlbumIndex \ --key-condition-expression "AlbumTitle = :album" \ --expression-attribute-values '{":album":{"S":"Kind of Blue"}}' # Query the GenreYearIndex GSI with a range condition echo "Querying GenreYearIndex GSI with range condition:" aws dynamodb query \ --table-name MusicLibrary \ --index-name GenreYearIndex \ --key-condition-expression "Genre = :genre AND #yr > :year" \ --expression-attribute-names '{"#yr": "Year"}' \ --expression-attribute-values '{":genre":{"S":"Rock"},":year":{"N":"1965"}}'-
API-Details finden Sie in den folgenden Themen der AWS CLI-Befehlsreferenz.
-
Das folgende Codebeispiel zeigt, wie globale DynamoDB-Tabellen mit multiregionaler starker Konsistenz (Multiregion Strong Consistency, MRSC) erstellt und verwaltet werden.
Erstellen Sie eine Tabelle mit multiregionaler starker Konsistenz (Multiregion Strong Consistency, MRSC).
Überprüfen Sie die MRSC-Konfiguration und den Replikatstatus.
Testen Sie die starke Konsistenz in allen Regionen mit sofortigen Lesevorgängen.
Führen Sie bedingte Schreibvorgänge mit MRSC-Garantien durch.
Bereinigen Sie die globalen MRSC-Tabellenressourcen.
- AWS CLI mit Bash-Skript
-
Erstellen Sie eine Tabelle mit multiregionaler starker Konsistenz (Multiregion Strong Consistency, MRSC).
# Step 1: Create a new table in us-east-2 (primary region for MRSC) # Note: Table must be empty when enabling MRSC aws dynamodb create-table \ --table-name MusicTable \ --attribute-definitions \ AttributeName=Artist,AttributeType=S \ AttributeName=SongTitle,AttributeType=S \ --key-schema \ AttributeName=Artist,KeyType=HASH \ AttributeName=SongTitle,KeyType=RANGE \ --billing-mode PAY_PER_REQUEST \ --region us-east-2 # Wait for table to become active aws dynamodb wait table-exists --table-name MusicTable --region us-east-2 # Step 2: Add replica and witness with Multi-Region Strong Consistency # MRSC requires exactly three replicas in supported regions aws dynamodb update-table \ --table-name MusicTable \ --replica-updates '[{"Create": {"RegionName": "us-east-1"}}]' \ --global-table-witness-updates '[{"Create": {"RegionName": "us-west-2"}}]' \ --multi-region-consistency STRONG \ --region us-east-2Überprüfen Sie die MRSC-Konfiguration und den Replikatstatus.
# Verify the global table configuration and MRSC setting aws dynamodb describe-table \ --table-name MusicTable \ --region us-east-2 \ --query 'Table.{TableName:TableName,TableStatus:TableStatus,MultiRegionConsistency:MultiRegionConsistency,Replicas:Replicas[*],GlobalTableWitnesses:GlobalTableWitnesses[*].{Region:RegionName,Status:ReplicaStatus}}'Testen Sie die starke Konsistenz mit sofortigen Lesevorgängen in allen Regionen.
# Write an item to the primary region aws dynamodb put-item \ --table-name MusicTable \ --item '{"Artist": {"S":"The Beatles"},"SongTitle": {"S":"Hey Jude"},"Album": {"S":"The Beatles 1967-1970"},"Year": {"N":"1968"}}' \ --region us-east-2 # Read the item from replica region to verify strong consistency (cannot read or write to witness) # No wait time needed - MRSC provides immediate consistency echo "Reading from us-east-1 (immediate consistency):" aws dynamodb get-item \ --table-name MusicTable \ --key '{"Artist": {"S":"The Beatles"},"SongTitle": {"S":"Hey Jude"}}' \ --consistent-read \ --region us-east-1Führen Sie bedingte Schreibvorgänge mit MRSC-Garantien durch.
# Perform a conditional update from a different region # This demonstrates that conditions work consistently across all regions aws dynamodb update-item \ --table-name MusicTable \ --key '{"Artist": {"S":"The Beatles"},"SongTitle": {"S":"Hey Jude"}}' \ --update-expression "SET #rating = :rating" \ --condition-expression "attribute_exists(Artist)" \ --expression-attribute-names '{"#rating": "Rating"}' \ --expression-attribute-values '{":rating": {"N":"5"}}' \ --region us-east-1Bereinigen Sie die globalen MRSC-Tabellenressourcen.
# Remove replica tables (must be done before deleting the primary table) aws dynamodb update-table \ --table-name MusicTable \ --replica-updates '[{"Delete": {"RegionName": "us-east-1"}}]' \ --global-table-witness-updates '[{"Delete": {"RegionName": "us-west-2"}}]' \ --region us-east-2 # Wait for replicas to be deleted echo "Waiting for replicas to be deleted..." sleep 30 # Delete the primary table aws dynamodb delete-table \ --table-name MusicTable \ --region us-east-2-
API-Details finden Sie in den folgenden Themen der AWS CLI-Befehlsreferenz.
-
Im folgenden Codebeispiel wird gezeigt, wie Sie den gesamten Lebenszyklus globaler sekundärer Indizes verwalten.
Erstellen Sie eine Tabelle mit einem globalen sekundären Index.
Fügen Sie einer vorhandenen Tabelle einen neuen GSI hinzu.
Aktualisieren (erhöhen) Sie den GSI-Warmdurchsatz.
Fragen Sie Daten mithilfe von GSIs ab.
Löschen Sie einen GSI.
- AWS CLI mit Bash-Skript
-
Erstellen Sie eine Tabelle mit einem globalen sekundären Index.
# Create a table with a GSI aws dynamodb create-table \ --table-name MusicCollection \ --attribute-definitions \ AttributeName=Artist,AttributeType=S \ AttributeName=SongTitle,AttributeType=S \ AttributeName=AlbumTitle,AttributeType=S \ --key-schema \ AttributeName=Artist,KeyType=HASH \ AttributeName=SongTitle,KeyType=RANGE \ --billing-mode PAY_PER_REQUEST \ --global-secondary-indexes \ "IndexName=AlbumIndex,\ KeySchema=[{AttributeName=AlbumTitle,KeyType=HASH}],\ Projection={ProjectionType=ALL}"Fügen Sie einer vorhandenen Tabelle einen neuen (On-Demand-) GSI hinzu.
# Add a new GSI to an existing table aws dynamodb update-table \ --table-name MusicCollection \ --attribute-definitions \ AttributeName=Genre,AttributeType=S \ --global-secondary-index-updates \ "[{\"Create\":{\"IndexName\":\"GenreIndex\",\ \"KeySchema\":[{\"AttributeName\":\"Genre\",\"KeyType\":\"HASH\"}],\ \"Projection\":{\"ProjectionType\":\"ALL\"}}}]"Aktualisieren (erhöhen) Sie den GSI-Warmdurchsatz.
# Increase the warm throughput of a GSI (default values are 12k reads, 4k writes) aws dynamodb update-table \ --table-name MusicCollection \ --global-secondary-index-updates \ "[{\"Update\":{\"IndexName\":\"AlbumIndex\",\ \"WarmThroughput\":{\"ReadUnitsPerSecond\":15000,\"WriteUnitsPerSecond\":6000}}}]"Fragen Sie Daten mithilfe von GSIs ab.
# Query the AlbumIndex GSI aws dynamodb query \ --table-name MusicCollection \ --index-name AlbumIndex \ --key-condition-expression "AlbumTitle = :album" \ --expression-attribute-values '{":album":{"S":"Let It Be"}}' # Query the GenreIndex GSI aws dynamodb query \ --table-name MusicCollection \ --index-name GenreIndex \ --key-condition-expression "Genre = :genre" \ --expression-attribute-values '{":genre":{"S":"Jazz"}}'Löschen Sie einen GSI.
# Delete a GSI from a table aws dynamodb update-table \ --table-name MusicCollection \ --global-secondary-index-updates \ "[{\"Delete\":{\"IndexName\":\"GenreIndex\"}}]"-
API-Details finden Sie in den folgenden Themen der AWS CLI-Befehlsreferenz.
-
Im folgenden Codebeispiel wird gezeigt, wie Sie den gesamten Lebenszyklus ressourcenbasierter Richtlinien für DynamoDB-Tabellen verwalten.
Erstellen Sie eine Tabelle mit einer Ressourcenrichtlinie.
Rufen Sie eine Ressourcenrichtlinie ab.
Aktualisieren Sie eine Ressourcenrichtlinie.
Löschen Sie eine Ressourcenrichtlinie.
- AWS CLI mit Bash-Skript
-
Erstellen Sie eine Tabelle mit einer Ressourcenrichtlinie.
# Step 1: Create a DynamoDB table aws dynamodb create-table \ --table-name MusicCollection \ --attribute-definitions \ AttributeName=Artist,AttributeType=S \ AttributeName=SongTitle,AttributeType=S \ --key-schema \ AttributeName=Artist,KeyType=HASH \ AttributeName=SongTitle,KeyType=RANGE \ --billing-mode PAY_PER_REQUEST # Step 2: Create a resource-based policy document cat > policy.json << 'EOF' { "Version":"2012-10-17", "Statement": [ { "Effect": "Allow", "Principal": { "AWS": "arn:aws:iam::123456789012:role/DynamoDBReadOnly" }, "Action": [ "dynamodb:GetItem", "dynamodb:BatchGetItem", "dynamodb:Query", "dynamodb:Scan" ], "Resource": "arn:aws:dynamodb:us-west-2:123456789012:table/MusicCollection" } ] } EOF # Step 3: Attach the resource-based policy to the table aws dynamodb put-resource-policy \ --resource-arn arn:aws:dynamodb:us-west-2:123456789012:table/MusicCollection \ --policy file://policy.jsonRufen Sie eine Ressourcenrichtlinie ab.
# Get the resource-based policy attached to a table aws dynamodb get-resource-policy \ --resource-arn arn:aws:dynamodb:us-west-2:123456789012:table/MusicCollectionAktualisieren Sie eine Ressourcenrichtlinie.
# Step 1: Create an updated policy document cat > updated-policy.json << 'EOF' { "Version":"2012-10-17", "Statement": [ { "Effect": "Allow", "Principal": { "AWS": [ "arn:aws:iam::123456789012:role/DynamoDBReadOnly", "arn:aws:iam::123456789012:role/DynamoDBAnalytics" ] }, "Action": [ "dynamodb:GetItem", "dynamodb:BatchGetItem", "dynamodb:Query", "dynamodb:Scan" ], "Resource": "arn:aws:dynamodb:us-west-2:123456789012:table/MusicCollection" } ] } EOF # Step 2: Update the resource-based policy on the table aws dynamodb put-resource-policy \ --resource-arn arn:aws:dynamodb:us-west-2:123456789012:table/MusicCollection \ --policy file://updated-policy.jsonLöschen Sie eine Ressourcenrichtlinie.
# Delete the resource-based policy from a table aws dynamodb delete-resource-policy \ --resource-arn arn:aws:dynamodb:us-west-2:123456789012:table/MusicCollection-
API-Details finden Sie in den folgenden Themen der AWS CLI-Befehlsreferenz.
-
Im folgenden Codebeispiel wird gezeigt, wie Sie die attributbasierte Zugriffskontrolle (ABAC) für DynamoDB implementieren.
Erstellen Sie eine IAM-Richtlinie für ABAC.
Erstellen Sie Tabellen mit Tags für verschiedene Abteilungen.
Listen Sie Tabellen auf der Grundlage von Tags auf und filtern Sie sie.
- AWS CLI mit Bash-Skript
-
Erstellen Sie eine IAM-Richtlinie für ABAC.
# Step 1: Create a policy document for ABAC cat > abac-policy.json << 'EOF' { "Version":"2012-10-17", "Statement": [ { "Effect": "Allow", "Action": [ "dynamodb:GetItem", "dynamodb:BatchGetItem", "dynamodb:Query", "dynamodb:Scan" ], "Resource": "arn:aws:dynamodb:*:*:table/*", "Condition": { "StringEquals": { "aws:ResourceTag/Department": "${aws:PrincipalTag/Department}" } } }, { "Effect": "Allow", "Action": [ "dynamodb:PutItem", "dynamodb:UpdateItem", "dynamodb:DeleteItem", "dynamodb:BatchWriteItem" ], "Resource": "arn:aws:dynamodb:*:*:table/*", "Condition": { "StringEquals": { "aws:ResourceTag/Department": "${aws:PrincipalTag/Department}", "aws:ResourceTag/Environment": "Development" } } } ] } EOF # Step 2: Create the IAM policy aws iam create-policy \ --policy-name DynamoDBDepartmentBasedAccess \ --policy-document file://abac-policy.jsonErstellen Sie Tabellen mit Tags für verschiedene Abteilungen.
# Create a DynamoDB table with tags for ABAC aws dynamodb create-table \ --table-name FinanceData \ --attribute-definitions \ AttributeName=RecordID,AttributeType=S \ --key-schema \ AttributeName=RecordID,KeyType=HASH \ --billing-mode PAY_PER_REQUEST \ --tags \ Key=Department,Value=Finance \ Key=Environment,Value=Development # Create another table with different tags aws dynamodb create-table \ --table-name MarketingData \ --attribute-definitions \ AttributeName=RecordID,AttributeType=S \ --key-schema \ AttributeName=RecordID,KeyType=HASH \ --billing-mode PAY_PER_REQUEST \ --tags \ Key=Department,Value=Marketing \ Key=Environment,Value=ProductionListen Sie Tabellen auf der Grundlage von Tags auf und filtern Sie sie.
# List all DynamoDB tables echo "Listing all tables:" aws dynamodb list-tables # Get ARNs for all tables echo -e "\nGetting ARNs for all tables:" TABLE_ARNS=$(aws dynamodb list-tables --query "TableNames[*]" --output text | xargs -I {} aws dynamodb describe-table --table-name {} --query "Table.TableArn" --output text) # For each table ARN, list its tags echo -e "\nListing tags for each table:" for ARN in $TABLE_ARNS; do TABLE_NAME=$(echo $ARN | awk -F/ '{print $2}') echo -e "\nTags for table: $TABLE_NAME" aws dynamodb list-tags-of-resource --resource-arn $ARN done # Example: Find tables with a specific tag echo -e "\nFinding tables with Environment=Production tag:" for ARN in $TABLE_ARNS; do TABLE_NAME=$(echo $ARN | awk -F/ '{print $2}') TAGS=$(aws dynamodb list-tags-of-resource --resource-arn $ARN --query "Tags[?Key=='Environment' && Value=='Production']" --output text) if [ ! -z "$TAGS" ]; then echo "Table with Production tag: $TABLE_NAME" fi done-
API-Details finden Sie in den folgenden Themen der AWS CLI-Befehlsreferenz.
-
Im folgenden Codebeispiel wird gezeigt, wie Sie Tabellen mit lokalen sekundären Indizes erstellen und abfragen.
Erstellen Sie eine Tabelle mit einem lokalen sekundären Index (LSI).
Erstellen Sie eine Tabelle mit mehreren LSIs mit unterschiedlichen Projektionstypen.
Fragen Sie Daten mithilfe von LSIs ab.
- AWS CLI mit Bash-Skript
-
Erstellen Sie eine Tabelle mit einem lokalen sekundären Index.
# Create a table with a Local Secondary Index aws dynamodb create-table \ --table-name CustomerOrders \ --attribute-definitions \ AttributeName=CustomerID,AttributeType=S \ AttributeName=OrderID,AttributeType=S \ AttributeName=OrderDate,AttributeType=S \ --key-schema \ AttributeName=CustomerID,KeyType=HASH \ AttributeName=OrderID,KeyType=RANGE \ --local-secondary-indexes \ "IndexName=OrderDateIndex,\ KeySchema=[{AttributeName=CustomerID,KeyType=HASH},{AttributeName=OrderDate,KeyType=RANGE}],\ Projection={ProjectionType=ALL}" \ --billing-mode PAY_PER_REQUESTErstellen Sie eine Tabelle mit mehreren LSIs.
# Create a table with multiple Local Secondary Indexes aws dynamodb create-table \ --table-name CustomerDetails \ --attribute-definitions \ AttributeName=CustomerID,AttributeType=S \ AttributeName=Name,AttributeType=S \ AttributeName=Email,AttributeType=S \ AttributeName=RegistrationDate,AttributeType=S \ --key-schema \ AttributeName=CustomerID,KeyType=HASH \ AttributeName=Name,KeyType=RANGE \ --local-secondary-indexes \ "[ { \"IndexName\": \"EmailIndex\", \"KeySchema\": [ {\"AttributeName\":\"CustomerID\",\"KeyType\":\"HASH\"}, {\"AttributeName\":\"Email\",\"KeyType\":\"RANGE\"} ], \"Projection\": {\"ProjectionType\":\"INCLUDE\",\"NonKeyAttributes\":[\"Address\",\"Phone\"]} }, { \"IndexName\": \"RegistrationIndex\", \"KeySchema\": [ {\"AttributeName\":\"CustomerID\",\"KeyType\":\"HASH\"}, {\"AttributeName\":\"RegistrationDate\",\"KeyType\":\"RANGE\"} ], \"Projection\": {\"ProjectionType\":\"KEYS_ONLY\"} } ]" \ --billing-mode PAY_PER_REQUESTFragen Sie Daten mithilfe von LSIs ab.
# Query the OrderDateIndex LSI aws dynamodb query \ --table-name CustomerOrders \ --index-name OrderDateIndex \ --key-condition-expression "CustomerID = :custId AND OrderDate BETWEEN :date1 AND :date2" \ --expression-attribute-values '{ ":custId": {"S": "C1"}, ":date1": {"S": "2023-01-01"}, ":date2": {"S": "2023-02-01"} }' # Query with a filter expression aws dynamodb query \ --table-name CustomerOrders \ --index-name OrderDateIndex \ --key-condition-expression "CustomerID = :custId" \ --filter-expression "Amount > :amount" \ --expression-attribute-values '{ ":custId": {"S": "C1"}, ":amount": {"N": "150"} }'-
API-Details finden Sie in den folgenden Themen der AWS CLI-Befehlsreferenz.
-
Im folgenden Codebeispiel wird gezeigt, wie DynamoDB-Streams- und Time-to-Live-Funktionen verwaltet werden.
Erstellen Sie eine Tabelle mit aktiviertem Streams.
Beschreiben Sie Streams.
Erstellen Sie eine Lambda-Funktion für die Verarbeitung von Streams.
Aktivieren Sie TTL für eine Tabelle.
Fügen Sie Elemente mit TTL-Attributen hinzu.
Beschreiben Sie TTL-Einstellungen.
- AWS CLI mit Bash-Skript
-
Erstellen Sie eine Tabelle mit aktiviertem Streams.
# Create a table with DynamoDB Streams enabled aws dynamodb create-table \ --table-name StreamsDemo \ --attribute-definitions \ AttributeName=ID,AttributeType=S \ --key-schema \ AttributeName=ID,KeyType=HASH \ --billing-mode PAY_PER_REQUEST \ --stream-specification StreamEnabled=true,StreamViewType=NEW_AND_OLD_IMAGESBeschreiben Sie Streams.
# Get information about the stream aws dynamodb describe-table \ --table-name StreamsDemo \ --query "Table.StreamSpecification" # Get the stream ARN STREAM_ARN=$(aws dynamodb describe-table \ --table-name StreamsDemo \ --query "Table.LatestStreamArn" \ --output text) echo "Stream ARN: $STREAM_ARN" # Describe the stream aws dynamodbstreams describe-stream \ --stream-arn $STREAM_ARNErstellen Sie eine Lambda-Funktion für Streams.
# Step 1: Create an IAM role for the Lambda function cat > trust-policy.json << 'EOF' { "Version":"2012-10-17", "Statement": [ { "Effect": "Allow", "Principal": { "Service": "lambda.amazonaws.com" }, "Action": "sts:AssumeRole" } ] } EOF aws iam create-role \ --role-name DynamoDBStreamsLambdaRole \ --assume-role-policy-document file://trust-policy.json # Step 2: Attach permissions to the role aws iam attach-role-policy \ --role-name DynamoDBStreamsLambdaRole \ --policy-arn arn:aws:iam::aws:policy/service-role/AWSLambdaDynamoDBExecutionRole # Step 3: Create a Lambda function (code would be in a separate file) echo "Lambda function creation would be done separately with appropriate code" # Step 4: Create an event source mapping echo "Example command to create event source mapping:" echo "aws lambda create-event-source-mapping \\" echo " --function-name ProcessDynamoDBRecords \\" echo " --event-source $STREAM_ARN \\" echo " --batch-size 100 \\" echo " --starting-position LATEST"Aktivieren Sie TTL für eine Tabelle.
# Create a table for TTL demonstration aws dynamodb create-table \ --table-name TTLDemo \ --attribute-definitions \ AttributeName=ID,AttributeType=S \ --key-schema \ AttributeName=ID,KeyType=HASH \ --billing-mode PAY_PER_REQUEST # Wait for table to become active aws dynamodb wait table-exists --table-name TTLDemo # Enable TTL on the table aws dynamodb update-time-to-live \ --table-name TTLDemo \ --time-to-live-specification "Enabled=true, AttributeName=ExpirationTime"Fügen Sie Elemente mit TTL-Attributen hinzu.
# Calculate expiration time (current time + 1 day in seconds) EXPIRATION_TIME=$(date -d "+1 day" +%s) # Add an item with TTL attribute aws dynamodb put-item \ --table-name TTLDemo \ --item '{ "ID": {"S": "item1"}, "Data": {"S": "This item will expire in 1 day"}, "ExpirationTime": {"N": "'$EXPIRATION_TIME'"} }' # Add an item that expires in 1 hour EXPIRATION_TIME_HOUR=$(date -d "+1 hour" +%s) aws dynamodb put-item \ --table-name TTLDemo \ --item '{ "ID": {"S": "item2"}, "Data": {"S": "This item will expire in 1 hour"}, "ExpirationTime": {"N": "'$EXPIRATION_TIME_HOUR'"} }'Beschreiben Sie TTL-Einstellungen.
# Describe TTL settings for a table aws dynamodb describe-time-to-live \ --table-name TTLDemo-
API-Details finden Sie in den folgenden Themen der AWS CLI-Befehlsreferenz.
-
Das folgende Codebeispiel zeigt, wie globale DynamoDB-Tabellen mit letztendlicher multiregionaler Konsistenz (Multi-Region Eventual Consistency, MREC) verwaltet werden.
Erstellen Sie eine Tabelle mit multiregionaler Replikation (MREC).
Fügen Sie Elemente in eine Replikattabelle ein und rufen Sie Elemente aus der Tabelle ab.
Entfernen Sie die Replikate nacheinander.
Führen Sie eine Bereinigung durch Löschen der Tabelle aus.
- AWS CLI mit Bash-Skript
-
Erstellen Sie eine Tabelle mit multiregionaler Replikation.
# Step 1: Create a new table (MusicTable) in US East (Ohio), with DynamoDB Streams enabled (NEW_AND_OLD_IMAGES) aws dynamodb create-table \ --table-name MusicTable \ --attribute-definitions \ AttributeName=Artist,AttributeType=S \ AttributeName=SongTitle,AttributeType=S \ --key-schema \ AttributeName=Artist,KeyType=HASH \ AttributeName=SongTitle,KeyType=RANGE \ --billing-mode PAY_PER_REQUEST \ --stream-specification StreamEnabled=true,StreamViewType=NEW_AND_OLD_IMAGES \ --region us-east-2 # Step 2: Create an identical MusicTable table in US East (N. Virginia) aws dynamodb update-table --table-name MusicTable --cli-input-json \ '{ "ReplicaUpdates": [ { "Create": { "RegionName": "us-east-1" } } ] }' \ --region us-east-2 # Step 3: Create a table in Europe (Ireland) aws dynamodb update-table --table-name MusicTable --cli-input-json \ '{ "ReplicaUpdates": [ { "Create": { "RegionName": "eu-west-1" } } ] }' \ --region us-east-2Beschreiben Sie die multiregionale Tabelle.
# Step 4: View the list of replicas created using describe-table aws dynamodb describe-table \ --table-name MusicTable \ --region us-east-2 \ --query 'Table.{TableName:TableName,TableStatus:TableStatus,MultiRegionConsistency:MultiRegionConsistency,Replicas:Replicas[*].{Region:RegionName,Status:ReplicaStatus}}'Fügen Sie Elemente in eine Replikattabelle ein.
# Step 5: To verify that replication is working, add a new item to the Music table in US East (Ohio) aws dynamodb put-item \ --table-name MusicTable \ --item '{"Artist": {"S":"item_1"},"SongTitle": {"S":"Song Value 1"}}' \ --region us-east-2Rufen Sie Elemente aus Replikattabellen ab.
# Step 6: Wait for a few seconds, and then check to see whether the item has been # successfully replicated to US East (N. Virginia) and Europe (Ireland) aws dynamodb get-item \ --table-name MusicTable \ --key '{"Artist": {"S":"item_1"},"SongTitle": {"S":"Song Value 1"}}' \ --region us-east-1 aws dynamodb get-item \ --table-name MusicTable \ --key '{"Artist": {"S":"item_1"},"SongTitle": {"S":"Song Value 1"}}' \ --region eu-west-1Entfernen Sie Replikate.
# Step 7: Delete the replica table in Europe (Ireland) Region aws dynamodb update-table --table-name MusicTable --cli-input-json \ '{ "ReplicaUpdates": [ { "Delete": { "RegionName": "eu-west-1" } } ] }' \ --region us-east-2 # Delete the replica table in US East (N. Virginia) Region aws dynamodb update-table --table-name MusicTable --cli-input-json \ '{ "ReplicaUpdates": [ { "Delete": { "RegionName": "us-east-1" } } ] }' \ --region us-east-2Führen Sie eine Bereinigung durch Löschen der Tabelle aus.
# Clean up: Delete the primary table aws dynamodb delete-table --table-name MusicTable --region us-east-2 echo "Global table demonstration complete."-
API-Details finden Sie in den folgenden Themen der AWS CLI-Befehlsreferenz.
-
Im folgenden Codebeispiel wird gezeigt, wie Sie Tags für DynamoDB-Ressourcen verwalten.
Erstellen Sie eine Tabelle mit Tags.
Listet Tags für eine Ressource auf
Fügen Sie einer Ressource Tags hinzu.
Entfernen Sie Tags aus einer Ressource.
Filtern Sie Tabellen nach Tags.
- AWS CLI mit Bash-Skript
-
Erstellen Sie eine Tabelle mit Tags.
# Create a table with tags aws dynamodb create-table \ --table-name TaggedTable \ --attribute-definitions \ AttributeName=ID,AttributeType=S \ --key-schema \ AttributeName=ID,KeyType=HASH \ --billing-mode PAY_PER_REQUEST \ --tags \ Key=Environment,Value=Production \ Key=Project,Value=Analytics \ Key=Owner,Value=DataTeamListet Tags für eine Ressource auf
# Get the table ARN TABLE_ARN=$(aws dynamodb describe-table \ --table-name TaggedTable \ --query "Table.TableArn" \ --output text) # List tags for the table aws dynamodb list-tags-of-resource \ --resource-arn $TABLE_ARNFügen Sie einer Ressource Tags hinzu.
# Add tags to an existing table aws dynamodb tag-resource \ --resource-arn $TABLE_ARN \ --tags \ Key=CostCenter,Value=12345 \ Key=BackupSchedule,Value=DailyEntfernen Sie Tags aus einer Ressource.
# Remove tags from a table aws dynamodb untag-resource \ --resource-arn $TABLE_ARN \ --tag-keys Owner BackupScheduleFiltern Sie Tabellen nach Tags.
# Create another table with different tags aws dynamodb create-table \ --table-name AnotherTaggedTable \ --attribute-definitions \ AttributeName=ID,AttributeType=S \ --key-schema \ AttributeName=ID,KeyType=HASH \ --billing-mode PAY_PER_REQUEST \ --tags \ Key=Environment,Value=Development \ Key=Project,Value=Testing # Wait for table to become active aws dynamodb wait table-exists --table-name AnotherTaggedTable # List all tables echo "All tables:" aws dynamodb list-tables # Get ARNs for all tables echo -e "\nFiltering tables by Environment=Production tag:" TABLE_ARNS=$(aws dynamodb list-tables --query "TableNames[*]" --output text | xargs -I {} aws dynamodb describe-table --table-name {} --query "Table.TableArn" --output text) # Find tables with specific tag for ARN in $TABLE_ARNS; do TABLE_NAME=$(echo $ARN | awk -F/ '{print $2}') TAGS=$(aws dynamodb list-tags-of-resource --resource-arn $ARN --query "Tags[?Key=='Environment' && Value=='Production']" --output text) if [ ! -z "$TAGS" ]; then echo "Table with Production tag: $TABLE_NAME" fi done-
API-Details finden Sie in den folgenden Themen der AWS CLI-Befehlsreferenz.
-
Im folgenden Codebeispiel wird gezeigt, wie Sie Verschlüsselungsoptionen für DynamoDB-Tabellen verwalten.
Erstellen Sie eine Tabelle mit Standardverschlüsselung.
Erstellen Sie eine Tabelle mit einem kundenverwalteten CMK.
Aktualisieren Sie die Einstellungen für die Tabellenverschlüsselung.
Beschreiben Sie die Tabellenverschlüsselung.
- AWS CLI mit Bash-Skript
-
Erstellen Sie eine Tabelle mit Standardverschlüsselung.
# Create a table with default encryption (AWS owned key) aws dynamodb create-table \ --table-name CustomerData \ --attribute-definitions \ AttributeName=CustomerID,AttributeType=S \ --key-schema \ AttributeName=CustomerID,KeyType=HASH \ --billing-mode PAY_PER_REQUEST \ --sse-specification Enabled=true,SSEType=KMSErstellen Sie eine Tabelle mit einem kundenverwalteten CMK.
# Step 1: Create a customer managed key in KMS aws kms create-key \ --description "Key for DynamoDB table encryption" \ --key-usage ENCRYPT_DECRYPT \ --customer-master-key-spec SYMMETRIC_DEFAULT # Store the key ID for later use KEY_ID=$(aws kms list-keys --query "Keys[?contains(KeyArn, 'Key for DynamoDB')].KeyId" --output text) # Step 2: Create a table with the customer managed key aws dynamodb create-table \ --table-name SensitiveData \ --attribute-definitions \ AttributeName=RecordID,AttributeType=S \ --key-schema \ AttributeName=RecordID,KeyType=HASH \ --billing-mode PAY_PER_REQUEST \ --sse-specification Enabled=true,SSEType=KMS,KMSMasterKeyId=$KEY_IDAktualisieren Sie die Tabellenverschlüsselung.
# Update a table to use a different KMS key aws dynamodb update-table \ --table-name CustomerData \ --sse-specification Enabled=true,SSEType=KMS,KMSMasterKeyId=$KEY_IDBeschreiben Sie die Tabellenverschlüsselung.
# Describe the table to see encryption settings aws dynamodb describe-table \ --table-name CustomerData \ --query "Table.SSEDescription"-
API-Details finden Sie in den folgenden Themen der AWS CLI-Befehlsreferenz.
-
