Die vorliegende Übersetzung wurde maschinell erstellt. Im Falle eines Konflikts oder eines Widerspruchs zwischen dieser übersetzten Fassung und der englischen Fassung (einschließlich infolge von Verzögerungen bei der Übersetzung) ist die englische Fassung maßgeblich.
# Erstellen einer neuen DynamoDB-Tabelle mit einem höheren Warmdurchsatz
Sie können die Werte für den Warmdurchsatz beim Erstellen Ihrer DynamoDB-Tabelle anpassen, indem Sie die folgenden Schritte ausführen. Diese Schritte gelten auch für die Erstellung einer [globalen Tabelle](GlobalTables.md) oder eines [sekundären Index](SecondaryIndexes.md).
## AWS-Managementkonsole
So erstellen Sie eine DynamoDB-Tabelle und passen die Werte für den Warmdurchsatz über die Konsole an:
1. Melden Sie sich bei der an AWS-Managementkonsole und öffnen Sie die DynamoDB-Konsole unter. [https://console.aws.amazon.com/dynamodb/](https://console.aws.amazon.com/dynamodb/)
1. Wählen Sie **Tabelle erstellen** aus.
1. Wählen Sie einen **Tabellennamen**, einen **Partitionsschlüssel** und einen **Sortierschlüssel (optional)** aus.
1. Wählen Sie unter **Tabelleneinstellungen** die Option **Einstellungen anpassen** aus.
1. Wählen Sie im Feld **Warmdurchsatz** die Option **Warmdurchsatz erhöhen** aus.
1. Passen Sie die **Leseeinheiten pro Sekunde** und die **Schreibeinheiten pro Sekunde** an. Diese beiden Einstellungen definieren den maximalen Durchsatz, den die Tabelle sofort verarbeiten kann.
1. Fügen Sie weitere Tabellendetails hinzu und wählen Sie dann **Tabelle erstellen** aus.
## AWS CLI
Das folgende AWS CLI Beispiel zeigt Ihnen, wie Sie eine DynamoDB-Tabelle mit benutzerdefinierten Warmdurchsatzwerten erstellen.
1. Führen Sie die `create-table`-Operation aus, um die folgende DynamoDB-Tabelle zu erstellen.
```
aws dynamodb create-table \
--table-name GameScores \
--attribute-definitions AttributeName=UserId,AttributeType=S \
AttributeName=GameTitle,AttributeType=S \
AttributeName=TopScore,AttributeType=N \
--key-schema AttributeName=UserId,KeyType=HASH \
AttributeName=GameTitle,KeyType=RANGE \
--provisioned-throughput ReadCapacityUnits=20,WriteCapacityUnits=10 \
--global-secondary-indexes \
"[
{
\"IndexName\": \"GameTitleIndex\",
\"KeySchema\": [{\"AttributeName\":\"GameTitle\",\"KeyType\":\"HASH\"},
{\"AttributeName\":\"TopScore\",\"KeyType\":\"RANGE\"}],
\"Projection\":{
\"ProjectionType\":\"INCLUDE\",
\"NonKeyAttributes\":[\"UserId\"]
},
\"ProvisionedThroughput\": {
\"ReadCapacityUnits\": 50,
\"WriteCapacityUnits\": 25
},\"WarmThroughput\": {
\"ReadUnitsPerSecond\": 1987,
\"WriteUnitsPerSecond\": 543
}
}
]" \
--warm-throughput ReadUnitsPerSecond=12345,WriteUnitsPerSecond=4567 \
--region us-east-1
```
1. Sie erhalten eine ähnliche Antwort wie die folgende. Ihre `WarmThroughput`-Einstellungen werden als `ReadUnitsPerSecond` und `WriteUnitsPerSecond` angezeigt. `Status` lautet `UPDATING`, wenn der Wert für den Warmdurchsatz aktualisiert wird, und `ACTIVE`, wenn der neue Warmdurchsatzwert festgelegt wird.
```
{
"TableDescription": {
"AttributeDefinitions": [
{
"AttributeName": "GameTitle",
"AttributeType": "S"
},
{
"AttributeName": "TopScore",
"AttributeType": "N"
},
{
"AttributeName": "UserId",
"AttributeType": "S"
}
],
"TableName": "GameScores",
"KeySchema": [
{
"AttributeName": "UserId",
"KeyType": "HASH"
},
{
"AttributeName": "GameTitle",
"KeyType": "RANGE"
}
],
"TableStatus": "CREATING",
"CreationDateTime": 1730241788.779,
"ProvisionedThroughput": {
"NumberOfDecreasesToday": 0,
"ReadCapacityUnits": 20,
"WriteCapacityUnits": 10
},
"TableSizeBytes": 0,
"ItemCount": 0,
"TableArn": "arn:aws:dynamodb:us-east-1:XXXXXXXXXXXX:table/GameScores",
"TableId": "XXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX",
"GlobalSecondaryIndexes": [
{
"IndexName": "GameTitleIndex",
"KeySchema": [
{
"AttributeName": "GameTitle",
"KeyType": "HASH"
},
{
"AttributeName": "TopScore",
"KeyType": "RANGE"
}
],
"Projection": {
"ProjectionType": "INCLUDE",
"NonKeyAttributes": [
"UserId"
]
},
"IndexStatus": "CREATING",
"ProvisionedThroughput": {
"NumberOfDecreasesToday": 0,
"ReadCapacityUnits": 50,
"WriteCapacityUnits": 25
},
"IndexSizeBytes": 0,
"ItemCount": 0,
"IndexArn": "arn:aws:dynamodb:us-east-1:XXXXXXXXXXXX:table/GameScores/index/GameTitleIndex",
"WarmThroughput": {
"ReadUnitsPerSecond": 1987,
"WriteUnitsPerSecond": 543,
"Status": "UPDATING"
}
}
],
"DeletionProtectionEnabled": false,
"WarmThroughput": {
"ReadUnitsPerSecond": 12345,
"WriteUnitsPerSecond": 4567,
"Status": "UPDATING"
}
}
}
```
## AWS SDK
Die folgenden SDK-Beispiele zeigen Ihnen, wie Sie eine DynamoDB-Tabelle mit benutzerdefinierten Werden für den Warmdurchsatz erstellen.
------
#### [ Java ]
```
import software.amazon.awscdk.services.dynamodb.ProjectionType;
import software.amazon.awssdk.services.dynamodb.DynamoDbClient;
import software.amazon.awssdk.services.dynamodb.model.CreateTableResponse;
import software.amazon.awssdk.services.dynamodb.model.CreateTableRequest;
import software.amazon.awssdk.services.dynamodb.model.KeySchemaElement;
import software.amazon.awssdk.services.dynamodb.model.KeyType;
import software.amazon.awssdk.services.dynamodb.model.ProvisionedThroughput;
import software.amazon.awssdk.services.dynamodb.model.Projection;
import software.amazon.awssdk.services.dynamodb.model.GlobalSecondaryIndex;
import software.amazon.awssdk.services.dynamodb.model.AttributeDefinition;
import software.amazon.awssdk.services.dynamodb.model.ScalarAttributeType;
import software.amazon.awssdk.services.dynamodb.model.WarmThroughput;
...
public static WarmThroughput buildWarmThroughput(final Long readUnitsPerSecond,
final Long writeUnitsPerSecond) {
return WarmThroughput.builder()
.readUnitsPerSecond(readUnitsPerSecond)
.writeUnitsPerSecond(writeUnitsPerSecond)
.build();
}
private static AttributeDefinition buildAttributeDefinition(final String attributeName,
final ScalarAttributeType scalarAttributeType) {
return AttributeDefinition.builder()
.attributeName(attributeName)
.attributeType(scalarAttributeType)
.build();
}
private static KeySchemaElement buildKeySchemaElement(final String attributeName,
final KeyType keyType) {
return KeySchemaElement.builder()
.attributeName(attributeName)
.keyType(keyType)
.build();
}
public static void createDynamoDBTable(DynamoDbClient ddb,
String tableName,
String partitionKey,
String sortKey,
String miscellaneousKeyAttribute,
String nonKeyAttribute,
Long tableReadCapacityUnits,
Long tableWriteCapacityUnits,
Long tableWarmReadUnitsPerSecond,
Long tableWarmWriteUnitsPerSecond,
String globalSecondaryIndexName,
Long globalSecondaryIndexReadCapacityUnits,
Long globalSecondaryIndexWriteCapacityUnits,
Long globalSecondaryIndexWarmReadUnitsPerSecond,
Long globalSecondaryIndexWarmWriteUnitsPerSecond) {
// Define the table attributes
final AttributeDefinition partitionKeyAttribute = buildAttributeDefinition(partitionKey, ScalarAttributeType.S);
final AttributeDefinition sortKeyAttribute = buildAttributeDefinition(sortKey, ScalarAttributeType.S);
final AttributeDefinition miscellaneousKeyAttributeDefinition = buildAttributeDefinition(miscellaneousKeyAttribute, ScalarAttributeType.N);
final AttributeDefinition[] attributeDefinitions = {partitionKeyAttribute, sortKeyAttribute, miscellaneousKeyAttributeDefinition};
// Define the table key schema
final KeySchemaElement partitionKeyElement = buildKeySchemaElement(partitionKey, KeyType.HASH);
final KeySchemaElement sortKeyElement = buildKeySchemaElement(sortKey, KeyType.RANGE);
final KeySchemaElement[] keySchema = {partitionKeyElement, sortKeyElement};
// Define the provisioned throughput for the table
final ProvisionedThroughput provisionedThroughput = ProvisionedThroughput.builder()
.readCapacityUnits(tableReadCapacityUnits)
.writeCapacityUnits(tableWriteCapacityUnits)
.build();
// Define the Global Secondary Index (GSI)
final KeySchemaElement globalSecondaryIndexPartitionKeyElement = buildKeySchemaElement(sortKey, KeyType.HASH);
final KeySchemaElement globalSecondaryIndexSortKeyElement = buildKeySchemaElement(miscellaneousKeyAttribute, KeyType.RANGE);
final KeySchemaElement[] gsiKeySchema = {globalSecondaryIndexPartitionKeyElement, globalSecondaryIndexSortKeyElement};
final Projection gsiProjection = Projection.builder()
.projectionType(String.valueOf(ProjectionType.INCLUDE))
.nonKeyAttributes(nonKeyAttribute)
.build();
final ProvisionedThroughput gsiProvisionedThroughput = ProvisionedThroughput.builder()
.readCapacityUnits(globalSecondaryIndexReadCapacityUnits)
.writeCapacityUnits(globalSecondaryIndexWriteCapacityUnits)
.build();
// Define the warm throughput for the Global Secondary Index (GSI)
final WarmThroughput gsiWarmThroughput = buildWarmThroughput(globalSecondaryIndexWarmReadUnitsPerSecond, globalSecondaryIndexWarmWriteUnitsPerSecond);
final GlobalSecondaryIndex globalSecondaryIndex = GlobalSecondaryIndex.builder()
.indexName(globalSecondaryIndexName)
.keySchema(gsiKeySchema)
.projection(gsiProjection)
.provisionedThroughput(gsiProvisionedThroughput)
.warmThroughput(gsiWarmThroughput)
.build();
// Define the warm throughput for the table
final WarmThroughput tableWarmThroughput = buildWarmThroughput(tableWarmReadUnitsPerSecond, tableWarmWriteUnitsPerSecond);
final CreateTableRequest request = CreateTableRequest.builder()
.tableName(tableName)
.attributeDefinitions(attributeDefinitions)
.keySchema(keySchema)
.provisionedThroughput(provisionedThroughput)
.globalSecondaryIndexes(globalSecondaryIndex)
.warmThroughput(tableWarmThroughput)
.build();
CreateTableResponse response = ddb.createTable(request);
System.out.println(response);
}
```
------
#### [ Python ]
```
from boto3 import resource
from botocore.exceptions import ClientError
def create_dynamodb_table_warm_throughput(table_name, partition_key, sort_key, misc_key_attr, non_key_attr, table_provisioned_read_units, table_provisioned_write_units, table_warm_reads, table_warm_writes, gsi_name, gsi_provisioned_read_units, gsi_provisioned_write_units, gsi_warm_reads, gsi_warm_writes, region_name="us-east-1"):
"""
Creates a DynamoDB table with a warm throughput setting configured.
:param table_name: The name of the table to be created.
:param partition_key: The partition key for the table being created.
:param sort_key: The sort key for the table being created.
:param misc_key_attr: A miscellaneous key attribute for the table being created.
:param non_key_attr: A non-key attribute for the table being created.
:param table_provisioned_read_units: The newly created table's provisioned read capacity units.
:param table_provisioned_write_units: The newly created table's provisioned write capacity units.
:param table_warm_reads: The read units per second setting for the table's warm throughput.
:param table_warm_writes: The write units per second setting for the table's warm throughput.
:param gsi_name: The name of the Global Secondary Index (GSI) to be created on the table.
:param gsi_provisioned_read_units: The configured Global Secondary Index (GSI) provisioned read capacity units.
:param gsi_provisioned_write_units: The configured Global Secondary Index (GSI) provisioned write capacity units.
:param gsi_warm_reads: The read units per second setting for the Global Secondary Index (GSI)'s warm throughput.
:param gsi_warm_writes: The write units per second setting for the Global Secondary Index (GSI)'s warm throughput.
:param region_name: The AWS Region name to target. defaults to us-east-1
"""
try:
ddb = resource('dynamodb', region_name)
# Define the table attributes
attribute_definitions = [
{ "AttributeName": partition_key, "AttributeType": "S" },
{ "AttributeName": sort_key, "AttributeType": "S" },
{ "AttributeName": misc_key_attr, "AttributeType": "N" }
]
# Define the table key schema
key_schema = [
{ "AttributeName": partition_key, "KeyType": "HASH" },
{ "AttributeName": sort_key, "KeyType": "RANGE" }
]
# Define the provisioned throughput for the table
provisioned_throughput = {
"ReadCapacityUnits": table_provisioned_read_units,
"WriteCapacityUnits": table_provisioned_write_units
}
# Define the global secondary index
gsi_key_schema = [
{ "AttributeName": sort_key, "KeyType": "HASH" },
{ "AttributeName": misc_key_attr, "KeyType": "RANGE" }
]
gsi_projection = {
"ProjectionType": "INCLUDE",
"NonKeyAttributes": [non_key_attr]
}
gsi_provisioned_throughput = {
"ReadCapacityUnits": gsi_provisioned_read_units,
"WriteCapacityUnits": gsi_provisioned_write_units
}
gsi_warm_throughput = {
"ReadUnitsPerSecond": gsi_warm_reads,
"WriteUnitsPerSecond": gsi_warm_writes
}
global_secondary_indexes = [
{
"IndexName": gsi_name,
"KeySchema": gsi_key_schema,
"Projection": gsi_projection,
"ProvisionedThroughput": gsi_provisioned_throughput,
"WarmThroughput": gsi_warm_throughput
}
]
# Define the warm throughput for the table
warm_throughput = {
"ReadUnitsPerSecond": table_warm_reads,
"WriteUnitsPerSecond": table_warm_writes
}
# Create the DynamoDB client and create the table
response = ddb.create_table(
TableName=table_name,
AttributeDefinitions=attribute_definitions,
KeySchema=key_schema,
ProvisionedThroughput=provisioned_throughput,
GlobalSecondaryIndexes=global_secondary_indexes,
WarmThroughput=warm_throughput
)
print(response)
except ClientError as e:
print(f"Error creating table: {e}")
raise e
```
------
#### [ Javascript ]
```
import { DynamoDBClient, CreateTableCommand } from "@aws-sdk/client-dynamodb";
async function createDynamoDBTableWithWarmThroughput(
tableName,
partitionKey,
sortKey,
miscKeyAttr,
nonKeyAttr,
tableProvisionedReadUnits,
tableProvisionedWriteUnits,
tableWarmReads,
tableWarmWrites,
indexName,
indexProvisionedReadUnits,
indexProvisionedWriteUnits,
indexWarmReads,
indexWarmWrites,
region = "us-east-1"
) {
try {
const ddbClient = new DynamoDBClient({ region: region });
const command = new CreateTableCommand({
TableName: tableName,
AttributeDefinitions: [
{ AttributeName: partitionKey, AttributeType: "S" },
{ AttributeName: sortKey, AttributeType: "S" },
{ AttributeName: miscKeyAttr, AttributeType: "N" },
],
KeySchema: [
{ AttributeName: partitionKey, KeyType: "HASH" },
{ AttributeName: sortKey, KeyType: "RANGE" },
],
ProvisionedThroughput: {
ReadCapacityUnits: tableProvisionedReadUnits,
WriteCapacityUnits: tableProvisionedWriteUnits,
},
WarmThroughput: {
ReadUnitsPerSecond: tableWarmReads,
WriteUnitsPerSecond: tableWarmWrites,
},
GlobalSecondaryIndexes: [
{
IndexName: indexName,
KeySchema: [
{ AttributeName: sortKey, KeyType: "HASH" },
{ AttributeName: miscKeyAttr, KeyType: "RANGE" },
],
Projection: {
ProjectionType: "INCLUDE",
NonKeyAttributes: [nonKeyAttr],
},
ProvisionedThroughput: {
ReadCapacityUnits: indexProvisionedReadUnits,
WriteCapacityUnits: indexProvisionedWriteUnits,
},
WarmThroughput: {
ReadUnitsPerSecond: indexWarmReads,
WriteUnitsPerSecond: indexWarmWrites,
},
},
],
});
const response = await ddbClient.send(command);
console.log(response);
} catch (error) {
console.error(`Error creating table: ${error}`);
throw error;
}
}
```
------