Amazon Inspector examples using AWS CLI - AWS SDK Code Examples
Actions

There are more AWS SDK examples available in the AWS Doc SDK Examples GitHub repo.

Amazon Inspector examples using AWS CLI

The following code examples show you how to perform actions and implement common scenarios by using the AWS Command Line Interface with Amazon Inspector.

Actions are code excerpts from larger programs and must be run in context. While actions show you how to call individual service functions, you can see actions in context in their related scenarios.

Each example includes a link to the complete source code, where you can find instructions on how to set up and run the code in context.

Topics

Actions

The following code example shows how to use add-attributes-to-findings.

AWS CLI

To add attributes to findings

The following add-attribute-to-finding command assigns an attribute with the key of Example and value of example to the finding with the ARN of arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-8l1VIE0D/run/0-Z02cjjug/finding/0-T8yM9mEU:

aws inspector add-attributes-to-findings --finding-arns arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-8l1VIE0D/run/0-Z02cjjug/finding/0-T8yM9mEU --attributes key=Example,value=example

Output:

{
    "failedItems": {}
}

For more information, see Amazon Inspector Findings in the Amazon Inspector guide.

The following code example shows how to use associate-member.

AWS CLI

Example: To associate an AWS account with an Amazon Inspector delegated administrator

The following associate-member example associates an AWS account with an Amazon Inspector delegated administrator.

aws inspector2 associate-member \
    --account-id 123456789012

Output:

{
    "accountId": "123456789012"
}

For more information, see Managing multiple accounts in Amazon Inspector with AWS Organizations in the Amazon Inspector User Guide.

The following code example shows how to use create-assessment-target.

AWS CLI

To create an assessment target

The following create-assessment-target command creates an assessment target named ExampleAssessmentTarget using the resource group with the ARN of arn:aws:inspector:us-west-2:123456789012:resourcegroup/0-AB6DMKnv:

aws inspector create-assessment-target --assessment-target-name ExampleAssessmentTarget --resource-group-arn arn:aws:inspector:us-west-2:123456789012:resourcegroup/0-AB6DMKnv

Output:

{
    "assessmentTargetArn": "arn:aws:inspector:us-west-2:123456789012:target/0-nvgVhaxX"
}

For more information, see Amazon Inspector Assessment Targets in the Amazon Inspector guide.

The following code example shows how to use create-assessment-template.

AWS CLI

To create an assessment template

The following create-assessment-template command creates an assessment template called ExampleAssessmentTemplate for the assessment target with the ARN of arn:aws:inspector:us-west-2:123456789012:target/0-nvgVhaxX:

aws inspector create-assessment-template --assessment-target-arn arn:aws:inspector:us-west-2:123456789012:target/0-nvgVhaxX --assessment-template-name ExampleAssessmentTemplate --duration-in-seconds 180 --rules-package-arns arn:aws:inspector:us-west-2:758058086616:rulespackage/0-9hgA516p --user-attributes-for-findings key=ExampleTag,value=examplevalue

Output:

{
    "assessmentTemplateArn": "arn:aws:inspector:us-west-2:123456789012:target/0-nvgVhaxX/template/0-it5r2S4T"
}

For more information, see Amazon Inspector Assessment Templates and Assessment Runs in the Amazon Inspector guide.

The following code example shows how to use create-filter.

AWS CLI

To create a filter

The following create-filter example creates a suppression rule that omits ECR instance type findings.

aws inspector2 create-filter \
    --name "ExampleSuppressionRuleECR" \
    --description "This suppression rule omits ECR instance type findings" \
    --action SUPPRESS \
    --filter-criteria 'resourceType=[{comparison="EQUALS", value="AWS_ECR_INSTANCE"}]'

Output:

{
    "arn": "arn:aws:inspector2:us-west-2:123456789012:owner/o-EXAMPLE222/filter/EXAMPLE444444444"
}

For more information, see Filtering Amazon Inspector findings in the Amazon Inspector User Guide.

  • For API details, see CreateFilter in AWS CLI Command Reference.

The following code example shows how to use create-findings-report.

AWS CLI

To create a findings report

The following create-findings-report example creates a finding report.

aws inspector2 create-findings-report \
    --report-format CSV \
    --s3-destination bucketName=inspector-sbom-123456789012,keyPrefix=sbom-key,kmsKeyArn=arn:aws:kms:us-west-2:123456789012:key/a1b2c3d4-5678-90ab-cdef-EXAMPLE33333 \
    --filter-criteria '{"ecrImageRepositoryName":[{"comparison":"EQUALS","value":"debian"}]}'

Output:

{
    "reportId": "a1b2c3d4-5678-90ab-cdef-EXAMPLE33333"
}

For more information, see Managing findings in Amazon Inspector in the Amazon Inspector User Guide.

The following code example shows how to use create-resource-group.

AWS CLI

To create a resource group

The following create-resource-group command creates a resource group using the tag key of Name and value of example:

aws inspector create-resource-group --resource-group-tags key=Name,value=example

Output:

{
   "resourceGroupArn": "arn:aws:inspector:us-west-2:123456789012:resourcegroup/0-AB6DMKnv"
}

For more information, see Amazon Inspector Assessment Targets in the Amazon Inspector guide.

The following code example shows how to use create-sbom-export.

AWS CLI

To create a software bill of materials (SBOM) report

The following create-sbom-export example creates a software bill of materials (SBOM) report.

aws inspector2 create-sbom-export \
    --report-format SPDX_2_3 \
    --resource-filter-criteria 'ecrRepositoryName=[{comparison="EQUALS",value="debian"}]' \
    --s3-destination bucketName=inspector-sbom-123456789012,keyPrefix=sbom-key,kmsKeyArn=arn:aws:kms:us-west-2:123456789012:key/a1b2c3d4-5678-90ab-cdef-EXAMPLE33333

Output:

{
    "reportId": "a1b2c3d4-5678-90ab-cdef-EXAMPLE33333"
}

For more information, see Exporting SBOMs with Amazon Inspector in the Amazon Inspector User Guide.

The following code example shows how to use delete-assessment-run.

AWS CLI

To delete an assessment run

The following delete-assessment-run command deletes the assessment run with the ARN of arn:aws:inspector:us-west-2:123456789012:target/0-nvgVhaxX/template/0-it5r2S4T/run/0-11LMTAVe:

aws inspector delete-assessment-run --assessment-run-arn arn:aws:inspector:us-west-2:123456789012:target/0-nvgVhaxX/template/0-it5r2S4T/run/0-11LMTAVe

For more information, see Amazon Inspector Assessment Templates and Assessment Runs in the Amazon Inspector guide.

The following code example shows how to use delete-assessment-target.

AWS CLI

To delete an assessment target

The following delete-assessment-target command deletes the assessment target with the ARN of arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq:

aws inspector delete-assessment-target --assessment-target-arn arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq

For more information, see Amazon Inspector Assessment Targets in the Amazon Inspector guide.

The following code example shows how to use delete-assessment-template.

AWS CLI

To delete an assessment template

The following delete-assessment-template command deletes the assessment template with the ARN of arn:aws:inspector:us-west-2:123456789012:target/0-nvgVhaxX/template/0-it5r2S4T:

aws inspector delete-assessment-template --assessment-template-arn arn:aws:inspector:us-west-2:123456789012:target/0-nvgVhaxX/template/0-it5r2S4T

For more information, see Amazon Inspector Assessment Templates and Assessment Runs in the Amazon Inspector guide.

The following code example shows how to use delete-filter.

AWS CLI

To delete a filter

The following delete-filter example deletes a filter.

aws inspector2 delete-filter \
    --arn "arn:aws:inspector2:us-west-2:123456789012:owner/o-EXAMPLE222/filter/EXAMPLE444444444"

Output:

{
    "arn": "arn:aws:inspector2:us-west-2:123456789012:owner/o-EXAMPLE222/filter/EXAMPLE444444444"
}

For more information, see Filtering Amazon Inspector findings in the Amazon Inspector User Guide.

  • For API details, see DeleteFilter in AWS CLI Command Reference.

The following code example shows how to use describe-assessment-runs.

AWS CLI

To describe assessment runs

The following describe-assessment-run command describes an assessment run with the ARN of arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-4r1V2mAw/run/0-MKkpXXPE:

aws inspector describe-assessment-runs --assessment-run-arns arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-4r1V2mAw/run/0-MKkpXXPE

Output:

{
        "assessmentRuns": [
          {
                "arn": "arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-4r1V2mAw/run/0-MKkpXXPE",
                "assessmentTemplateArn": "arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-4r1V2mAw",
                "completedAt": 1458680301.4,
                "createdAt": 1458680170.035,
                "dataCollected": true,
                "durationInSeconds": 3600,
                "name": "Run 1 for ExampleAssessmentTemplate",
                "notifications": [],
                "rulesPackageArns": [
                  "arn:aws:inspector:us-west-2:758058086616:rulespackage/0-X1KXtawP"
                ],
                "startedAt": 1458680170.161,
                "state": "COMPLETED",
                "stateChangedAt": 1458680301.4,
                "stateChanges": [
                  {
                        "state": "CREATED",
                        "stateChangedAt": 1458680170.035
                  },
                  {
                        "state": "START_DATA_COLLECTION_PENDING",
                        "stateChangedAt": 1458680170.065
                  },
                  {
                        "state": "START_DATA_COLLECTION_IN_PROGRESS",
                        "stateChangedAt": 1458680170.096
                  },
                  {
                        "state": "COLLECTING_DATA",
                        "stateChangedAt": 1458680170.161
                  },
                  {
                        "state": "STOP_DATA_COLLECTION_PENDING",
                        "stateChangedAt": 1458680239.883
                  },
                  {
                        "state": "DATA_COLLECTED",
                        "stateChangedAt": 1458680299.847
                  },
                  {
                        "state": "EVALUATING_RULES",
                        "stateChangedAt": 1458680300.099
                  },
                  {
                        "state": "COMPLETED",
                        "stateChangedAt": 1458680301.4
                  }
                ],
                "userAttributesForFindings": []
          }
        ],
        "failedItems": {}
}

For more information, see Amazon Inspector Assessment Templates and Assessment Runs in the Amazon Inspector guide.

The following code example shows how to use describe-assessment-targets.

AWS CLI

To describe assessment targets

The following describe-assessment-targets command describes the assessment target with the ARN of arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq:

aws inspector describe-assessment-targets --assessment-target-arns arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq

Output:

{
      "assessmentTargets": [
        {
              "arn": "arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq",
              "createdAt": 1458074191.459,
              "name": "ExampleAssessmentTarget",
              "resourceGroupArn": "arn:aws:inspector:us-west-2:123456789012:resourcegroup/0-PyGXopAI",
              "updatedAt": 1458074191.459
        }
      ],
      "failedItems": {}
}

For more information, see Amazon Inspector Assessment Targets in the Amazon Inspector guide.

The following code example shows how to use describe-assessment-templates.

AWS CLI

To describe assessment templates

The following describe-assessment-templates command describes the assessment template with the ARN of arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-4r1V2mAw:

aws inspector describe-assessment-templates --assessment-template-arns arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-4r1V2mAw

Output:

{
      "assessmentTemplates": [
        {
              "arn": "arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-4r1V2mAw",
              "assessmentTargetArn": "arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq",
              "createdAt": 1458074191.844,
              "durationInSeconds": 3600,
              "name": "ExampleAssessmentTemplate",
              "rulesPackageArns": [
                "arn:aws:inspector:us-west-2:758058086616:rulespackage/0-X1KXtawP"
              ],
              "userAttributesForFindings": []
        }
      ],
      "failedItems": {}
}

For more information, see Amazon Inspector Assessment Templates and Assessment Runs in the Amazon Inspector guide.

The following code example shows how to use describe-cross-account-access-role.

AWS CLI

To describe the cross account access role

The following describe-cross-account-access-role command describes the IAM role that enables Amazon Inspector to access your AWS account:

aws inspector describe-cross-account-access-role

Output:

{
        "registeredAt": 1458069182.826,
        "roleArn": "arn:aws:iam::123456789012:role/inspector",
        "valid": true
}

For more information, see Setting up Amazon Inspector in the Amazon Inspector guide.

The following code example shows how to use describe-findings.

AWS CLI

To describe findings

The following describe-findings command describes the finding with the ARN of arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-4r1V2mAw/run/0-MKkpXXPE/finding/0-HwPnsDm4:

aws inspector describe-findings --finding-arns arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-4r1V2mAw/run/0-MKkpXXPE/finding/0-HwPnsDm4

Output:

{
      "failedItems": {},
      "findings": [
        {
              "arn": "arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-4r1V2mAw/run/0-MKkpXXPE/finding/0-HwPnsDm4",
              "assetAttributes": {
                "ipv4Addresses": [],
                "schemaVersion": 1
              },
              "assetType": "ec2-instance",
              "attributes": [],
              "confidence": 10,
              "createdAt": 1458680301.37,
              "description": "Amazon Inspector did not find any potential security issues during this assessment.",
              "indicatorOfCompromise": false,
              "numericSeverity": 0,
              "recommendation": "No remediation needed.",
              "schemaVersion": 1,
              "service": "Inspector",
              "serviceAttributes": {
                "assessmentRunArn": "arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-4r1V2mAw/run/0-MKkpXXPE",
                "rulesPackageArn": "arn:aws:inspector:us-west-2:758058086616:rulespackage/0-X1KXtawP",
                "schemaVersion": 1
              },
              "severity": "Informational",
              "title": "No potential security issues found",
              "updatedAt": 1458680301.37,
              "userAttributes": []
        }
      ]
}

For more information, see Amazon Inspector Findings in the Amazon Inspector guide.

The following code example shows how to use describe-resource-groups.

AWS CLI

To describe resource groups

The following describe-resource-groups command describes the resource group with the ARN of arn:aws:inspector:us-west-2:123456789012:resourcegroup/0-PyGXopAI:

aws inspector describe-resource-groups --resource-group-arns arn:aws:inspector:us-west-2:123456789012:resourcegroup/0-PyGXopAI

Output:

{
      "failedItems": {},
      "resourceGroups": [
        {
              "arn": "arn:aws:inspector:us-west-2:123456789012:resourcegroup/0-PyGXopAI",
              "createdAt": 1458074191.098,
              "tags": [
                {
                      "key": "Name",
                      "value": "example"
                }
              ]
        }
      ]
}

For more information, see Amazon Inspector Assessment Targets in the Amazon Inspector guide.

The following code example shows how to use describe-rules-packages.

AWS CLI

To describe rules packages

The following describe-rules-packages command describes the rules package with the ARN of arn:aws:inspector:us-west-2:758058086616:rulespackage/0-9hgA516p:

aws inspector describe-rules-packages --rules-package-arns arn:aws:inspector:us-west-2:758058086616:rulespackage/0-9hgA516p

Output:

{
      "failedItems": {},
      "rulesPackages": [
        {
              "arn": "arn:aws:inspector:us-west-2:758058086616:rulespackage/0-9hgA516p",
              "description": "The rules in this package help verify whether the EC2 instances in your application are exposed to Common Vulnerabilities and
              Exposures (CVEs). Attacks can exploit unpatched vulnerabilities to compromise the confidentiality, integrity, or availability of your service
              or data. The CVE system provides a reference for publicly known information security vulnerabilities and exposures. For more information, see
              [https://cve.mitre.org/](https://cve.mitre.org/). If a particular CVE appears in one of the produced Findings at the end of a completed
              Inspector assessment, you can search [https://cve.mitre.org/](https://cve.mitre.org/) using the CVE's ID (for example, \"CVE-2009-0021\") to
              find detailed information about this CVE, its severity, and how to mitigate it. ",
              "name": "Common Vulnerabilities and Exposures",
              "provider": "Amazon Web Services, Inc.",
              "version": "1.1"
        }
      ]
}

For more information, see Amazon Inspector Rules Packages and Rules in the Amazon Inspector guide.

The following code example shows how to use disassociate-member.

AWS CLI

Example: To disassociate a member account from an Amazon Inspector delegated administrator

The following disassociate-member example disassociates an AWS account from an Amazon Inspector delegated administrator.

aws inspector2 disassociate-member \
    --account-id 123456789012

Output:

{
    "accountId": "123456789012"
}

For more information, see Managing multiple accounts in Amazon Inspector with AWS Organizations in the Amazon Inspector User Guide.

The following code example shows how to use get-configuration.

AWS CLI

To get the setting configuration for Inspector scans

The following get-configuration example gets the setting configuration for Inspector scans.

aws inspector2 get-configuration

Output:

{
    "ec2Configuration": {
        "scanModeState": {
            "scanMode": "EC2_HYBRID",
            "scanModeStatus": "SUCCESS"
        }
    },
    "ecrConfiguration": {
        "rescanDurationState": {
            "pullDateRescanDuration": "DAYS_90",
            "rescanDuration": "DAYS_30",
            "status": "SUCCESS",
            "updatedAt": "2024-05-14T21:16:20.237000+00:00"
        }
     }
}

For more information, see Automated resource scanning with Amazon Inspector in the Amazon Inspector User Guide.

The following code example shows how to use get-member.

AWS CLI

Example: To get member information for your organization

aws inspector2 get-member --account-id 123456789012

Output:

{
        "member": {
        "accountId": "123456789012",
        "delegatedAdminAccountId": "123456789012",
        "relationshipStatus": "ENABLED",
        "updatedAt": "2023-09-11T09:57:20.520000-07:00"
    }
}

For more information, see Managing multiple accounts in Amazon Inspector with AWS Organizations in the Amazon Inspector User Guide.

  • For API details, see GetMember in AWS CLI Command Reference.

The following code example shows how to use get-telemetry-metadata.

AWS CLI

To get the telemetry metadata

The following get-telemetry-metadata command generates information about the data that is collected for the assessment run with the ARN of arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-4r1V2mAw/run/0-MKkpXXPE:

aws inspector get-telemetry-metadata --assessment-run-arn arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-4r1V2mAw/run/0-MKkpXXPE

Output:

{
      "telemetryMetadata": [
        {
              "count": 2,
              "dataSize": 345,
              "messageType": "InspectorDuplicateProcess"
        },
        {
              "count": 3,
              "dataSize": 255,
              "messageType": "InspectorTimeEventMsg"
        },
        {
              "count": 4,
              "dataSize": 1082,
              "messageType": "InspectorNetworkInterface"
        },
        {
              "count": 2,
              "dataSize": 349,
              "messageType": "InspectorDnsEntry"
        },
        {
              "count": 11,
              "dataSize": 2514,
              "messageType": "InspectorDirectoryInfoMsg"
        },
        {
              "count": 1,
              "dataSize": 179,
              "messageType": "InspectorTcpV6ListeningPort"
        },
        {
              "count": 101,
              "dataSize": 10949,
              "messageType": "InspectorTerminal"
        },
        {
              "count": 26,
              "dataSize": 5916,
              "messageType": "InspectorUser"
        },
        {
              "count": 282,
              "dataSize": 32148,
              "messageType": "InspectorDynamicallyLoadedCodeModule"
        },
        {
              "count": 18,
              "dataSize": 10172,
              "messageType": "InspectorCreateProcess"
        },
        {
              "count": 3,
              "dataSize": 8001,
              "messageType": "InspectorProcessPerformance"
        },
        {
              "count": 1,
              "dataSize": 360,
              "messageType": "InspectorOperatingSystem"
        },
        {
              "count": 6,
              "dataSize": 546,
              "messageType": "InspectorStopProcess"
        },
        {
              "count": 1,
              "dataSize": 1553,
              "messageType": "InspectorInstanceMetaData"
        },
        {
              "count": 2,
              "dataSize": 434,
              "messageType": "InspectorTcpV4Connection"
        },
        {
              "count": 474,
              "dataSize": 2960322,
              "messageType": "InspectorPackageInfo"
        },
        {
              "count": 3,
              "dataSize": 2235,
              "messageType": "InspectorSystemPerformance"
        },
        {
              "count": 105,
              "dataSize": 46048,
              "messageType": "InspectorCodeModule"
        },
        {
              "count": 1,
              "dataSize": 182,
              "messageType": "InspectorUdpV6ListeningPort"
        },
        {
              "count": 2,
              "dataSize": 371,
              "messageType": "InspectorUdpV4ListeningPort"
        },
        {
              "count": 18,
              "dataSize": 8362,
              "messageType": "InspectorKernelModule"
        },
        {
              "count": 29,
              "dataSize": 48788,
              "messageType": "InspectorConfigurationInfo"
        },
        {
              "count": 1,
              "dataSize": 79,
              "messageType": "InspectorMonitoringStart"
        },
        {
              "count": 5,
              "dataSize": 0,
              "messageType": "InspectorSplitMsgBegin"
        },
        {
              "count": 51,
              "dataSize": 4593,
              "messageType": "InspectorGroup"
        },
        {
              "count": 1,
              "dataSize": 184,
              "messageType": "InspectorTcpV4ListeningPort"
        },
        {
              "count": 1159,
              "dataSize": 3146579,
              "messageType": "Total"
        },
        {
              "count": 5,
              "dataSize": 0,
              "messageType": "InspectorSplitMsgEnd"
        },
        {
              "count": 1,
              "dataSize": 612,
              "messageType": "InspectorLoadImageInProcess"
        }
      ]
}

The following code example shows how to use list-account-permissions.

AWS CLI

To list account permissions

The following list-account-permissions example lists your account permissions.

aws inspector2 list-account-permissions

Output:

{
    "permissions": [
        {
            "operation": "ENABLE_SCANNING",
            "service": "ECR"
        },
        {
            "operation": "DISABLE_SCANNING",
            "service": "ECR"
        },
        {
            "operation": "ENABLE_REPOSITORY",
            "service": "ECR"
        },
        {
            "operation": "DISABLE_REPOSITORY",
            "service": "ECR"
        },
        {
            "operation": "ENABLE_SCANNING",
            "service": "EC2"
        },
        {
            "operation": "DISABLE_SCANNING",
            "service": "EC2"
        },
        {
            "operation": "ENABLE_SCANNING",
            "service": "LAMBDA"
        },
        {
            "operation": "DISABLE_SCANNING",
            "service": "LAMBDA"
        }
    ]
}

For more information, see Identity and Access Management for Amazon Inspector in the Amazon Inspector User Guide.

The following code example shows how to use list-assessment-run-agents.

AWS CLI

To list assessment run agents

The following list-assessment-run-agents command lists the agents of the assessment run with the specified ARN.

aws inspector list-assessment-run-agents \
    --assessment-run-arn arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-4r1V2mAw/run/0-MKkpXXPE

Output:

{
    "assessmentRunAgents": [
        {
            "agentHealth": "HEALTHY",
            "agentHealthCode": "HEALTHY",
            "agentId": "i-49113b93",
            "assessmentRunArn": "arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-4r1V2mAw/run/0-MKkpXXPE",
            "telemetryMetadata": [
                {
                    "count": 2,
                    "dataSize": 345,
                    "messageType": "InspectorDuplicateProcess"
                },
                {
                    "count": 3,
                    "dataSize": 255,
                    "messageType": "InspectorTimeEventMsg"
                },
                {
                    "count": 4,
                    "dataSize": 1082,
                    "messageType": "InspectorNetworkInterface"
                },
                {
                    "count": 2,
                    "dataSize": 349,
                    "messageType": "InspectorDnsEntry"
                },
                {
                    "count": 11,
                    "dataSize": 2514,
                    "messageType": "InspectorDirectoryInfoMsg"
                },
                {
                    "count": 1,
                    "dataSize": 179,
                    "messageType": "InspectorTcpV6ListeningPort"
                },
                {
                    "count": 101,
                    "dataSize": 10949,
                    "messageType": "InspectorTerminal"
                },
                {
                    "count": 26,
                    "dataSize": 5916,
                    "messageType": "InspectorUser"
                },
                {
                    "count": 282,
                    "dataSize": 32148,
                    "messageType": "InspectorDynamicallyLoadedCodeModule"
                },
                {
                    "count": 18,
                    "dataSize": 10172,
                    "messageType": "InspectorCreateProcess"
                },
                {
                    "count": 3,
                    "dataSize": 8001,
                    "messageType": "InspectorProcessPerformance"
                },
                {
                    "count": 1,
                    "dataSize": 360,
                    "messageType": "InspectorOperatingSystem"
                },
                {
                    "count": 6,
                    "dataSize": 546,
                    "messageType": "InspectorStopProcess"
                },
                {
                    "count": 1,
                    "dataSize": 1553,
                    "messageType": "InspectorInstanceMetaData"
                },
                {
                    "count": 2,
                    "dataSize": 434,
                    "messageType": "InspectorTcpV4Connection"
                },
                {
                    "count": 474,
                    "dataSize": 2960322,
                    "messageType": "InspectorPackageInfo"
                },
                {
                    "count": 3,
                    "dataSize": 2235,
                    "messageType": "InspectorSystemPerformance"
                },
                {
                    "count": 105,
                    "dataSize": 46048,
                    "messageType": "InspectorCodeModule"
                },
                {
                    "count": 1,
                    "dataSize": 182,
                    "messageType": "InspectorUdpV6ListeningPort"
                },
                {
                    "count": 2,
                    "dataSize": 371,
                    "messageType": "InspectorUdpV4ListeningPort"
                },
                {
                    "count": 18,
                    "dataSize": 8362,
                    "messageType": "InspectorKernelModule"
                },
                {
                    "count": 29,
                    "dataSize": 48788,
                    "messageType": "InspectorConfigurationInfo"
                },
                {
                    "count": 1,
                    "dataSize": 79,
                    "messageType": "InspectorMonitoringStart"
                },
                {
                    "count": 5,
                    "dataSize": 0,
                    "messageType": "InspectorSplitMsgBegin"
                },
                {
                    "count": 51,
                    "dataSize": 4593,
                    "messageType": "InspectorGroup"
                },
                {
                    "count": 1,
                    "dataSize": 184,
                    "messageType": "InspectorTcpV4ListeningPort"
                },
                {
                    "count": 1159,
                    "dataSize": 3146579,
                    "messageType": "Total"
                },
                {
                    "count": 5,
                    "dataSize": 0,
                    "messageType": "InspectorSplitMsgEnd"
                },
                {
                    "count": 1,
                    "dataSize": 612,
                    "messageType": "InspectorLoadImageInProcess"
                }
            ]
        }
    ]
}

For more information, see AWS Agents in the Amazon Inspector User Guide.

The following code example shows how to use list-assessment-runs.

AWS CLI

To list assessment runs

The following list-assessment-runs command lists all existing assessment runs.

aws inspector list-assessment-runs

Output:

{
    "assessmentRunArns": [
        "arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-4r1V2mAw/run/0-MKkpXXPE",
        "arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-4r1V2mAw/run/0-v5D6fI3v"
    ]
}

For more information, see Amazon Inspector Assessment Templates and Assessment Runs in the Amazon Inspector User Guide.

The following code example shows how to use list-assessment-targets.

AWS CLI

To list assessment targets

The following list-assessment-targets command lists all existing assessment targets:

aws inspector list-assessment-targets

Output:

{
       "assessmentTargetArns": [
       "arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq"
       ]
}

For more information, see Amazon Inspector Assessment Targets in the Amazon Inspector guide.

The following code example shows how to use list-assessment-templates.

AWS CLI

To list assessment templates

The following list-assessment-templates command lists all existing assessment templates:

aws inspector list-assessment-templates

Output:

{
       "assessmentTemplateArns": [
       "arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-4r1V2mAw",
       "arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-Uza6ihLh"
       ]
}

For more information, see Amazon Inspector Assessment Templates and Assessment Runs in the Amazon Inspector guide.

The following code example shows how to use list-coverage-statistics.

AWS CLI

Example 1: To list coverage statistics by groups

The following list-coverage-statistics example lists the coverage statistics of your AWS environment by groups.

aws inspector2 list-coverage-statistics \
   --group-by RESOURCE_TYPE

Output:

{
    "countsByGroup": [
        {
            "count": 56,
            "groupKey": "AWS_LAMBDA_FUNCTION"
        },
        {
            "count": 27,
            "groupKey": "AWS_ECR_REPOSITORY"
        },
        {
            "count": 18,
            "groupKey": "AWS_EC2_INSTANCE"
        },
        {
            "count": 3,
            "groupKey": "AWS_ECR_CONTAINER_IMAGE"
        },
        {
            "count": 1,
            "groupKey": "AWS_ACCOUNT"
        }
    ],
    "totalCounts": 105
}

For more information, see Assessing Amazon Inspector coverage of your AWS environment in the Amazon Inspector User Guide.

Example 2: To list coverage statistics by resource type

The following list-coverage-statistics example lists the coverage statistics of your AWS environment by resource type.

aws inspector2 list-coverage-statistics
    --filter-criteria '{"resourceType":[{"comparison":"EQUALS","value":"AWS_ECR_REPOSITORY"}]}'
    --group-by SCAN_STATUS_REASON

Output:

{
    "countsByGroup": [
        {
            "count": 27,
            "groupKey": "SUCCESSFUL"
        }
    ],
    "totalCounts": 27
}

For more information, see Assessing Amazon Inspector coverage of your AWS environment in the Amazon Inspector User Guide.

Example 3: To list coverage statistics by ECR repository name

The following list-coverage-statistics example lists the coverage statistics of your AWS environment by ECR repository name.

aws inspector2 list-coverage-statistics
   --filter-criteria '{"ecrRepositoryName":[{"comparison":"EQUALS","value":"debian"}]}'
   --group-by SCAN_STATUS_REASON

Output:

{
    "countsByGroup": [
        {
            "count": 3,
            "groupKey": "SUCCESSFUL"
        }
    ],
    "totalCounts": 3
}

For more information, see Assessing Amazon Inspector coverage of your AWS environment in the Amazon Inspector User Guide.

The following code example shows how to use list-coverage.

AWS CLI

Example 1: To list coverage details about your environment

The following list-coverage example lists your environment's coverage details.

aws inspector2 list-coverage

Output:

{
    "coveredResources": [
        {
            "accountId": "123456789012",
            "lastScannedAt": "2024-05-20T16:23:20-07:00",
            "resourceId": "i-EXAMPLE55555555555",
            "resourceMetadata": {
                "ec2": {
                    "amiId": "ami-EXAMPLE6666666666",
                    "platform": "LINUX"
                }
            },
            "resourceType": "AWS_EC2_INSTANCE",
            "scanStatus": {
                "reason": "SUCCESSFUL",
                "statusCode": "ACTIVE"
            },
            "scanType": "PACKAGE"
        }
    ]
}

Example 2: To list coverage details about the Lambda function resource type

The following list-coverage example lists your Lamda function resource type details.

aws inspector2 list-coverage
    --filter-criteria '{"resourceType":[{"comparison":"EQUALS","value":"AWS_LAMBDA_FUNCTION"}]}'

Output:

{
    "coveredResources": [
        {
            "accountId": "123456789012",
            "resourceId": "arn:aws:lambda:us-west-2:123456789012:function:Eval-container-scan-results:$LATEST",
            "resourceMetadata": {
                "lambdaFunction": {
                    "functionName": "Eval-container-scan-results",
                    "functionTags": {},
                    "layers": [],
                    "runtime": "PYTHON_3_7"
                }
            },
            "resourceType": "AWS_LAMBDA_FUNCTION",
            "scanStatus": {
                "reason": "SUCCESSFUL",
                "statusCode": "ACTIVE"
            },
            "scanType": "CODE"
        }
    ]
}

  • For API details, see ListCoverage in AWS CLI Command Reference.

The following code example shows how to use list-delegated-admin-accounts.

AWS CLI

To list information about the delegated administrator account of your organization

The following list-delegated-admin-accounts example lists information about the delegated administrator account of your organization.

aws inspector2 list-delegated-admin-accounts

Output:

{
    "delegatedAdminAccounts": [
        {
            "accountId": "123456789012",
            "status": "ENABLED"
        }
    ]
}

For more information, see Designating a delegated administrator for Amazon Inspector in the Amazon Inspector User Guide.

The following code example shows how to use list-event-subscriptions.

AWS CLI

To list event subscriptions

The following list-event-subscriptions command lists all the event subscriptions for the assessment template with the ARN of arn:aws:inspector:us-west-2:123456789012:target/0-nvgVhaxX/template/0-7sbz2Kz0:

aws inspector list-event-subscriptions --resource-arn arn:aws:inspector:us-west-2:123456789012:target/0-nvgVhaxX/template/0-7sbz2Kz0

Output:

{
      "subscriptions": [
        {
              "eventSubscriptions": [
                {
                      "event": "ASSESSMENT_RUN_COMPLETED",
                      "subscribedAt": 1459455440.867
                }
              ],
              "resourceArn": "arn:aws:inspector:us-west-2:123456789012:target/0-nvgVhaxX/template/0-7sbz2Kz0",
              "topicArn": "arn:aws:sns:us-west-2:123456789012:exampletopic"
        }
      ]
}

For more information, see Amazon Inspector Assessment Templates and Assessment Runs in the Amazon Inspector guide.

The following code example shows how to use list-filters.

AWS CLI

To list filters associated with the account that you used to activated Amazon Inspector

The following list-filters examples lists filters associated with the account that you used to activated Amazon Inspector.

aws inspector2 list-filters

Output:

{
    "filters": [
        {
            "action": "SUPPRESS",
            "arn": "arn:aws:inspector2:us-west-2:123456789012:owner/o-EXAMPLE222/filter/EXAMPLE444444444",
            "createdAt": "2024-05-15T21:11:08.602000+00:00",
            "criteria": {
                "resourceType": [
                    {
                        "comparison": "EQUALS",
                        "value": "AWS_EC2_INSTANCE"
                    },
                ]
            },
            "description": "This suppression rule omits EC2 instance type findings",
            "name": "ExampleSuppressionRuleEC2",
            "ownerId": "o-EXAMPLE222",
            "tags": {},
            "updatedAt": "2024-05-15T21:11:08.602000+00:00"
        },
        {
            "action": "SUPPRESS",
            "arn": "arn:aws:inspector2:us-east-1:813737243517:owner/o-EXAMPLE222/filter/EXAMPLE444444444",
            "createdAt": "2024-05-15T21:28:27.054000+00:00",
            "criteria": {
                "resourceType": [
                    {
                        "comparison": "EQUALS",
                        "value": "AWS_ECR_INSTANCE"
                    }
                ]
            },
            "description": "This suppression rule omits ECR instance type findings",
            "name": "ExampleSuppressionRuleECR",
            "ownerId": "o-EXAMPLE222",
            "tags": {},
            "updatedAt": "2024-05-15T21:28:27.054000+00:00"
        }
    ]
}

For more information, see Filtering Amazon Inspector findings in the Amazon Inspector User Guide.

  • For API details, see ListFilters in AWS CLI Command Reference.

The following code example shows how to use list-findings.

AWS CLI

To list findings

The following list-findings command lists all of the generated findings:

aws inspector list-findings

Output:

{
        "findingArns": [
        "arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-4r1V2mAw/run/0-MKkpXXPE/finding/0-HwPnsDm4",
        "arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-4r1V2mAw/run/0-v5D6fI3v/finding/0-tyvmqBLy"
      ]
}

For more information, see Amazon Inspector Findings in the Amazon Inspector guide.

  • For API details, see ListFindings in AWS CLI Command Reference.

The following code example shows how to use list-members.

AWS CLI

Example 1: To list all member accounts associated with the Amazon Inspector delegated administrator for your organization

aws inspector2 list-members --only-associated

Output:

{
        {
             "members": [
        {
             "accountId": "123456789012",
             "delegatedAdminAccountId": "123456789012",
             "relationshipStatus": "ENABLED",
             "updatedAt": "2023-09-11T09:57:20.520000-07:00"
        },
        {
             "accountId": "123456789012",
             "delegatedAdminAccountId": "123456789012",
             "relationshipStatus": "ENABLED",
             "updatedAt": "2024-08-12T10:13:01.472000-07:00"
        },
        {
             "accountId": "625032911453",
             "delegatedAdminAccountId": "123456789012",
             "relationshipStatus": "ENABLED",
             "updatedAt": "2023-09-11T09:57:20.438000-07:00"
        },
        {
            "accountId": "715411239211",
            "delegatedAdminAccountId": "123456789012",
            "relationshipStatus": "ENABLED",
            "updatedAt": "2024-04-24T09:14:57.471000-07:00"
        }
    ]
}

For more information, see Managing multiple accounts in Amazon Inspector with AWS Organizations in the Amazon Inspector User Guide.

Example 2: To list all member accounts associated with and disassociated from the Amazon Inspector delegated administrator for your organization

aws inspector2 list-members --no-only-associated

Output:

{
        {
            "members": [
        {
            "accountId": "123456789012",
            "delegatedAdminAccountId": "123456789012",
            "relationshipStatus": "REMOVED",
            "updatedAt": "2024-05-15T11:34:53.326000-07:00"
        },
        {
            "accountId": "123456789012",
            "delegatedAdminAccountId": "123456789012",
            "relationshipStatus": "ENABLED",
            "updatedAt": "2023-09-11T09:57:20.520000-07:00"
        },
        {
            "accountId": "123456789012",
            "delegatedAdminAccountId": "123456789012",
            "relationshipStatus": "ENABLED",
            "updatedAt": "2024-08-12T10:13:01.472000-07:00"
        },
        {
            "accountId": "123456789012",
            "delegatedAdminAccountId": "123456789012",
            "relationshipStatus": "ENABLED",
            "updatedAt": "2023-09-11T09:57:20.438000-07:00"
        },
        {
            "accountId": "123456789012",
            "delegatedAdminAccountId": "123456789012",
            "relationshipStatus": "ENABLED",
            "updatedAt": "2024-04-24T09:14:57.471000-07:00"
        }
    ]
}

For more information, see Managing multiple accounts in Amazon Inspector with AWS Organizations in the Amazon Inspector User Guide.

  • For API details, see ListMembers in AWS CLI Command Reference.

The following code example shows how to use list-rules-packages.

AWS CLI

To list rules packages

The following list-rules-packages command lists all available Inspector rules packages:

aws inspector list-rules-packages

Output:

{
       "rulesPackageArns": [
         "arn:aws:inspector:us-west-2:758058086616:rulespackage/0-9hgA516p",
         "arn:aws:inspector:us-west-2:758058086616:rulespackage/0-H5hpSawc",
         "arn:aws:inspector:us-west-2:758058086616:rulespackage/0-JJOtZiqQ",
         "arn:aws:inspector:us-west-2:758058086616:rulespackage/0-vg5GGHSD"
       ]
 }

For more information, see Amazon Inspector Rules Packages and Rules in the Amazon Inspector guide.

The following code example shows how to use list-tags-for-resource.

AWS CLI

To list tags for resource

The following list-tags-for-resource command lists all tags associated with the assessment template with the ARN of arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-gcwFliYu:

aws inspector list-tags-for-resource --resource-arn arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-gcwFliYu

Output:

{
      "tags": [
        {
              "key": "Name",
              "value": "Example"
        }
      ]
}

For more information, see Amazon Inspector Assessment Templates and Assessment Runs in the Amazon Inspector guide.

The following code example shows how to use list-usage-totals.

AWS CLI

To list usage totals over the last 30 days

The following list-usage-totals examples lists usage totals over the last 30 days.

aws inspector2 list-usage-totals

Output:

{
    "totals": [
        {
            "accountId": "123456789012",
            "usage": [
                {
                    "currency": "USD",
                    "estimatedMonthlyCost": 4.6022044647,
                    "total": 1893.4784083333334,
                    "type": "EC2_AGENTLESS_INSTANCE_HOURS"
                },
                {
                    "currency": "USD",
                    "estimatedMonthlyCost": 18.892449279,
                    "total": 10882.050784722222,
                    "type": "EC2_INSTANCE_HOURS"
                },
                {
                    "currency": "USD",
                    "estimatedMonthlyCost": 5.4525363736,
                    "total": 6543.043648333333,
                    "type": "LAMBDA_FUNCTION_CODE_HOURS"
                },
                {
                    "currency": "USD",
                    "estimatedMonthlyCost": 3.9064080309,
                    "total": 9375.379274166668,
                    "type": "LAMBDA_FUNCTION_HOURS"
                },
                {
                    "currency": "USD",
                    "estimatedMonthlyCost": 0.06,
                    "total": 6.0,
                    "type": "ECR_RESCAN"
                },
                {
                    "currency": "USD",
                    "estimatedMonthlyCost": 0.09,
                    "total": 1.0,
                    "type": "ECR_INITIAL_SCAN"
                }
            ]
        }
    ]
}

For more information, see Monitoring usage and cost in Amazon Inspector in the Amazon Inspector User Guide.

The following code example shows how to use preview-agents.

AWS CLI

To preview agents

The following preview-agents command previews the agents installed on the EC2 instances that are part of the assessment target with the ARN of arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq:

aws inspector preview-agents --preview-agents-arn arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq

Output:

{
      "agentPreviews": [
        {
              "agentId": "i-49113b93"
        }
      ]
}

For more information, see Amazon Inspector Assessment Targets in the Amazon Inspector guide.

  • For API details, see PreviewAgents in AWS CLI Command Reference.

The following code example shows how to use register-cross-account-access-role.

AWS CLI

To register the cross account access role

The following register-cross-account-access-role command registers the IAM role with the ARN of arn:aws:iam::123456789012:role/inspector that Amazon Inspector uses to list your EC2 instances at the start of the assessment run of when you call the preview-agents command:

aws inspector register-cross-account-access-role --role-arn arn:aws:iam::123456789012:role/inspector

For more information, see Setting up Amazon Inspector in the Amazon Inspector guide.

The following code example shows how to use remove-attributes-from-findings.

AWS CLI

To remove attributes from findings

The following remove-attributes-from-finding command removes the attribute with the key of Example and value of example from the finding with the ARN of arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-8l1VIE0D/run/0-Z02cjjug/finding/0-T8yM9mEU:

aws inspector remove-attributes-from-findings --finding-arns arn:aws:inspector:us-west-2:123456789012:target/0-0kFIPusq/template/0-8l1VIE0D/run/0-Z02cjjug/finding/0-T8yM9mEU --attribute-keys key=Example,value=example

Output:

{
      "failedItems": {}
}

For more information, see Amazon Inspector Findings in the Amazon Inspector guide.

The following code example shows how to use set-tags-for-resource.

AWS CLI

To set tags for a resource

The following set-tags-for-resource command sets the tag with the key of Example and value of example to the assessment template with the ARN of arn:aws:inspector:us-west-2:123456789012:target/0-nvgVhaxX/template/0-7sbz2Kz0:

aws inspector set-tags-for-resource --resource-arn arn:aws:inspector:us-west-2:123456789012:target/0-nvgVhaxX/template/0-7sbz2Kz0 --tags key=Example,value=example

For more information, see Amazon Inspector Assessment Templates and Assessment Runs in the Amazon Inspector guide.

The following code example shows how to use start-assessment-run.

AWS CLI

To start an assessment run

The following start-assessment-run command starts the assessment run named examplerun using the assessment template with the ARN of arn:aws:inspector:us-west-2:123456789012:target/0-nvgVhaxX/template/0-it5r2S4T:

aws inspector start-assessment-run --assessment-run-name examplerun --assessment-template-arn arn:aws:inspector:us-west-2:123456789012:target/0-nvgVhaxX/template/0-it5r2S4T

Output:

{
      "assessmentRunArn": "arn:aws:inspector:us-west-2:123456789012:target/0-nvgVhaxX/template/0-it5r2S4T/run/0-jOoroxyY"
}

For more information, see Amazon Inspector Assessment Templates and Assessment Runs in the Amazon Inspector guide.

The following code example shows how to use stop-assessment-run.

AWS CLI

To stop an assessment run

The following stop-assessment-run command stops the assessment run with the ARN of arn:aws:inspector:us-west-2:123456789012:target/0-nvgVhaxX/template/0-it5r2S4T/run/0-jOoroxyY:

aws inspector stop-assessment-run --assessment-run-arn arn:aws:inspector:us-west-2:123456789012:target/0-nvgVhaxX/template/0-it5r2S4T/run/0-jOoroxyY

For more information, see Amazon Inspector Assessment Templates and Assessment Runs in the Amazon Inspector guide.

The following code example shows how to use subscribe-to-event.

AWS CLI

To subscribe to an event

The following example enables the process of sending Amazon SNS notifications about the ASSESSMENT_RUN_COMPLETED event to the topic with the ARN of arn:aws:sns:us-west-2:123456789012:exampletopic

aws inspector subscribe-to-event \
    --event ASSESSMENT_RUN_COMPLETED \
    --resource-arn arn:aws:inspector:us-west-2:123456789012:target/0-nvgVhaxX/template/0-7sbz2Kz0 \
    --topic-arn arn:aws:sns:us-west-2:123456789012:exampletopic

This command produces no output.

For more information, see Amazon Inspector Assessment Templates and Assessment Runs in the Amazon Inspector guide.

The following code example shows how to use unsubscribe-from-event.

AWS CLI

To unsubscribe from an event

The following unsubscribe-from-event command disables the process of sending Amazon SNS notifications about the ASSESSMENT_RUN_COMPLETED event to the topic with the ARN of arn:aws:sns:us-west-2:123456789012:exampletopic:

aws inspector unsubscribe-from-event --event ASSESSMENT_RUN_COMPLETED --resource-arn arn:aws:inspector:us-west-2:123456789012:target/0-nvgVhaxX/template/0-7sbz2Kz0 --topic arn:aws:sns:us-west-2:123456789012:exampletopic

For more information, see Amazon Inspector Assessment Templates and Assessment Runs in the Amazon Inspector guide.

The following code example shows how to use update-assessment-target.

AWS CLI

To update an assessment target

The following update-assessment-target command updates the assessment target with the ARN of arn:aws:inspector:us-west-2:123456789012:target/0-nvgVhaxX and the name of Example, and the resource group with the ARN of arn:aws:inspector:us-west-2:123456789012:resourcegroup/0-yNbgL5Pt:

aws inspector update-assessment-target --assessment-target-arn arn:aws:inspector:us-west-2:123456789012:target/0-nvgVhaxX --assessment-target-name Example --resource-group-arn arn:aws:inspector:us-west-2:123456789012:resourcegroup/0-yNbgL5Pt

For more information, see Amazon Inspector Assessment Targets in the Amazon Inspector guide.

The following code example shows how to use update-filter.

AWS CLI

To update a filter

The following update-filter example updates a filter to omit Lambda findings instead of ECR instance findings.

aws inspector2 update-filter \
   --filter-arn "arn:aws:inspector2:us-west-2:123456789012:owner/o-EXAMPLE222/filter/EXAMPLE444444444" \
   --name "ExampleSuppressionRuleLambda" \
   --description "This suppression rule omits Lambda instance findings" \
   --reason "Updating filter to omit Lambda instance findings instead of ECR instance findings"

Output:

{
    "filters": [
        {
            "action": "SUPPRESS",
            "arn": "arn:aws:inspector2:us-west-2:123456789012:owner/o-EXAMPLE222/filter/EXAMPLE444444444",
            "createdAt": "2024-05-15T21:28:27.054000+00:00",
            "criteria": {
                "resourceType": [
                    {
                        "comparison": "EQUALS",
                        "value": "AWS_ECR_INSTANCE"
                    }
                ]
            },
            "description": "This suppression rule omits Lambda instance findings",
            "name": "ExampleSuppressionRuleLambda",
            "ownerId": "o-EXAMPLE222",
            "reason": "Updating filter to omit Lambda instance findings instead of ECR instance findings",
            "tags": {},
            "updatedAt": "2024-05-15T22:23:13.665000+00:00"
        }
    ]
}

For more information, see Managing findings in Amazon Inspector in the Amazon Inspector User Guide.

  • For API details, see UpdateFilter in AWS CLI Command Reference.