<a id="cli-aws-connectscheduling-create-time-off"></a>

# create-time-off

## Description

Creates a time off request for a user. You don’t provide a status, because Connect Customer owns the request lifecycle. To get the decided status, call `GetTimeOff` or use the time off state-change events.

> `ApprovalType` controls who approves the request. You can specify one of the following values:
* `AWAIT_APPROVAL` : the request waits in `AWAITING_APPROVAL` until you call `ApproveTimeOff` or `RejectTimeOff` . Rule evaluation and the overlap check run at approval, not at creation. A waiting request doesn’t reserve its window, so another request for the same window can be approved first.
* `AUTOMATIC` : Connect Customer evaluates the rules (time off balances and group allowances) and decides the request. The request can be `PENDING` while Connect Customer decides, and then ends `APPROVED` or `REJECTED` . If it overlaps another time off request for the user, the requested time off ends `REJECTED` with `CONFLICTING_TIME_OFF_REQUEST` . It also ends `REJECTED` if it overlaps overtime or voluntary time off. If the whole window is in the past, Connect Customer records failed rules as `WARNING` and doesn’t reject the request, whatever the `RuleFailureAction` .

The staffing group’s *Supervisor approval needed* setting doesn’t apply to this operation. `ApprovalType` alone decides whether the request waits for approval. The operation fails with `ValidationException` on `UserId` in the following cases:

* The user isn’t in a staffing group, or the staffing group isn’t associated with a forecast group.
* Time off isn’t [enabled](https://docs.aws.amazon.com/connect/latest/adminguide/enable-to.html) for the user’s staffing group, or the user’s staff rules don’t allow time off.

To change the dates of a request, cancel it with `CancelTimeOff` and create a new request. The new request has a new `TimeOffId` .

#### NOTE
Connect Customer doesn’t check whether the principal that calls this operation supervises the user. The staffing group’s approval settings also don’t apply. IAM permissions are the only control. If you allow a principal to call this operation, that principal can send `ApprovalType`  `AUTOMATIC` with `RuleFailureAction`  `OVERRIDE` and approve a request past failed rules. Grant permission for this operation only to principals that you trust to override time off rules.

For information about time off in the Connect Customer admin website, see [Time off management](https://docs.aws.amazon.com/connect/latest/adminguide/scheduling-time-off.html) in the *Connect Customer Administrator Guide* .

See also: [AWS API Documentation](https://docs.aws.amazon.com/goto/WebAPI/connectscheduling-2026-07-16/CreateTimeOff)

## Synopsis

```
  create-time-off
--instance-id <value>
--user-id <value>
--shift-activity-id <value>
--start-at <value>
--end-at <value>
[--description <value>]
--approval-type <value>
[--rule-failure-action <value>]
[--client-token <value>]
[--cli-input-json | --cli-input-yaml]
[--generate-cli-skeleton <value>]
[--debug]
[--endpoint-url <value>]
[--no-verify-ssl]
[--no-paginate]
[--output <value>]
[--query <value>]
[--profile <value>]
[--region <value>]
[--version <value>]
[--color <value>]
[--no-sign-request]
[--ca-bundle <value>]
[--cli-read-timeout <value>]
[--cli-connect-timeout <value>]
[--cli-binary-format <value>]
[--no-cli-pager]
[--cli-auto-prompt]
[--no-cli-auto-prompt]
[--cli-error-format <value>]
[--help]
```

## Options

`--instance-id` (string) [required]

> The identifier of the Connect Customer instance. This can be the ID or the ARN of the instance. You can [find the instance ID](https://docs.aws.amazon.com/connect/latest/adminguide/find-instance-arn.html) in the Amazon Resource Name (ARN) of the instance.

> Constraints:

> * min: `1`
> * max: `250`
> * pattern: `(arn:(aws|aws-us-gov):connect:[a-z]{2}(-[a-z]+){1,2}-[0-9]{1}:[0-9]{1,20}:instance/)?[a-f0-9]{8}-[a-f0-9]{4}-[a-f0-9]{4}-[a-f0-9]{4}-[a-f0-9]{12}`

`--user-id` (string) [required]

> The identifier of the user who the time off request is for. This can be the ID or the ARN of the user.

> Constraints:

> * min: `1`
> * max: `255`

`--shift-activity-id` (string) [required]

> The identifier of the shift activity that defines the type of time off being requested. This can be the ID or the ARN of the shift activity. It must be a time off activity. Activities that aren’t set as *Requestable* are accepted.

> Constraints:

> * min: `1`
> * max: `255`

`--start-at` (timestamp) [required]

> The start of the time off window, inclusive. It must be no earlier than one year before the current date. Connect Customer stores the value as sent, to the millisecond.

`--end-at` (timestamp) [required]

> The end of the time off window, exclusive. It must be after `StartAt` and no later than 24 months after the current date. Connect Customer stores the value as sent, to the millisecond.

`--description` (string)

> A description recorded on the time off request. If you omit it, the request has no description.

> Constraints:

> * min: `1`
> * max: `500`

`--approval-type` (string) [required]

> Controls who approves the request. `AWAIT_APPROVAL` waits for an `ApproveTimeOff` or `RejectTimeOff` call. `AUTOMATIC` has Connect Customer decide the request. For details, see `CreateTimeOff` .

> Possible values:

> * `AWAIT_APPROVAL`
> * `AUTOMATIC`

`--rule-failure-action` (string)

> Controls what happens when a configured rule fails. `REJECT` , the default, records an `ERROR` and ends the request `REJECTED` , unless the whole window is in the past. `OVERRIDE` records a `WARNING` and ends the request `APPROVED` , like the *Override time off rules* option in the Connect Customer admin website. `OVERRIDE` requires `AUTOMATIC` . With `AWAIT_APPROVAL` , `OVERRIDE` fails with `ValidationException` . Set it on `ApproveTimeOff` instead. `OVERRIDE` never waives `CONFLICTING_TIME_OFF_REQUEST` .

> Possible values:

> * `REJECT`
> * `OVERRIDE`

`--client-token` (string)

> A unique, case-sensitive identifier that you provide to ensure that the operation completes no more than one time. If this token matches a previous request, Connect Customer returns the result of that request and doesn’t create another time off request. If you don’t provide a token, the AWS SDK populates this field. If you reuse a client token with a different request body, the request fails with `ValidationException` . For more information about idempotency, see [Making retries safe with idempotent APIs](https://aws.amazon.com/builders-library/making-retries-safe-with-idempotent-APIs/) .

> Constraints:

> * min: `1`
> * max: `500`

`--cli-input-json` | `--cli-input-yaml` (string)
Reads arguments from the JSON string provided. The JSON string follows the format provided by `--generate-cli-skeleton`. If other arguments are provided on the command line, those values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally. This may not be specified along with `--cli-input-yaml`.

`--generate-cli-skeleton` (string)
Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value `input`, prints a sample input JSON that can be used as an argument for `--cli-input-json`. Similarly, if provided `yaml-input` it will print a sample input YAML that can be used with `--cli-input-yaml`. If provided with the value `output`, it validates the command inputs and returns a sample output JSON for that command. The generated JSON skeleton is not stable between versions of the AWS CLI and there are no backwards compatibility guarantees in the JSON skeleton generated.

## Global Options

`--debug` (boolean)

Turn on debug logging.

`--endpoint-url` (string)

Override command’s default URL with the given URL.

`--no-verify-ssl` (boolean)

By default, the AWS CLI uses SSL when communicating with AWS services. For each SSL connection, the AWS CLI will verify SSL certificates. This option overrides the default behavior of verifying SSL certificates.

`--no-paginate` (boolean)

Disable automatic pagination. If automatic pagination is disabled, the AWS CLI will only make one call, for the first page of results.

`--output` (string)

The formatting style for command output.

* json
* text
* table
* yaml
* yaml-stream
* off

`--query` (string)

A JMESPath query to use in filtering the response data.

`--profile` (string)

Use a specific profile from your credential file.

`--region` (string)

The region to use. Overrides config/env settings.

`--version` (string)

Display the version of this tool.

`--color` (string)

Turn on/off color output.

* on
* off
* auto

`--no-sign-request` (boolean)

Do not sign requests. Credentials will not be loaded if this argument is provided.

`--ca-bundle` (string)

The CA certificate bundle to use when verifying SSL certificates. Overrides config/env settings.

`--cli-read-timeout` (int)

The maximum socket read time in seconds. If the value is set to 0, the socket read will be blocking and not timeout. The default value is 60 seconds.

`--cli-connect-timeout` (int)

The maximum socket connect time in seconds. If the value is set to 0, the socket connect will be blocking and not timeout. The default value is 60 seconds.

`--cli-binary-format` (string)

The formatting style to be used for binary blobs. The default format is base64. The base64 format expects binary blobs to be provided as a base64 encoded string. The raw-in-base64-out format preserves compatibility with AWS CLI V1 behavior and binary values must be passed literally. When providing contents from a file that map to a binary blob `fileb://` will always be treated as binary and use the file contents directly regardless of the `cli-binary-format` setting. When using `file://` the file contents will need to properly formatted for the configured `cli-binary-format`.

* base64
* raw-in-base64-out

`--no-cli-pager` (boolean)

Disable cli pager for output.

`--cli-auto-prompt` (boolean)

Automatically prompt for CLI input parameters.

`--no-cli-auto-prompt` (boolean)

Disable automatically prompt for CLI input parameters.

`--cli-error-format` (string)

The formatting style for error output. By default, errors are displayed in enhanced format.

* legacy
* json
* yaml
* text
* table
* enhanced

`--help` (boolean)

Display help for the command/subcommand.

## Output

TimeOffId -> (string)

> The identifier of the time off request.

> Constraints:

> * min: `1`
> * max: `64`
> * pattern: `[a-z0-9-]+`
