# Create and Configure a New VPC
This topic describes how to use the VPC wizard to create a VPC with a public subnet and one private subnet. As part of this process, the wizard creates an internet gateway and a NAT gateway. It also creates a custom route table associated with the public subnet and updates the main route table associated with the private subnet. The NAT gateway is automatically created in the public subnet of your VPC.
After you use the wizard to create the initial VPC configuration, you'll add a second private subnet. For more information about this configuration, see [VPC with Public and Private Subnets (NAT)](https://docs.aws.amazon.com/vpc/latest/userguide/VPC_Scenario2.html) in the *Amazon VPC User Guide*.
**Note**
If you already have a VPC, complete the steps in [Add a NAT Gateway to an Existing VPC](add-nat-gateway-existing-vpc.md) instead.
**Topics**
+ [Step 1: Allocate an Elastic IP Address](#allocate-elastic-ip)
+ [Step 2: Create a New VPC](#vpc-with-private-and-public-subnets-nat)
+ [Step 3: Add a Second Private Subnet](#vpc-with-private-and-public-subnets-add-private-subnet-nat)
+ [Step 4: Verify and Name Your Subnet Route Tables](#verify-name-route-tables)
## Step 1: Allocate an Elastic IP Address
Before you create your VPC, you must allocate an Elastic IP address in your WorkSpaces Applications Region. You must first allocate an Elastic IP address for use in your VPC, and then associate it with your NAT gateway. For more information, see [Elastic IP Addresses](https://docs.aws.amazon.com/vpc/latest/userguide/vpc-eips.html) in the *Amazon VPC User Guide*.
**Note**
Charges may apply to Elastic IP addresses that you use. For more information, see [Elastic IP Addresses](https://aws.amazon.com/ec2/pricing/on-demand/#Elastic_IP_Addresses) on the Amazon EC2 pricing page.
Complete the following steps if you don't already have an Elastic IP address. If you want to use an existing Elastic IP address, verify that it's not currently associated with another instance or network interface.
**To allocate an Elastic IP address**
1. Open the Amazon EC2 console at [https://console.aws.amazon.com/ec2/](https://console.aws.amazon.com/ec2/).
1. In the navigation pane, under **Network & Security**, choose **Elastic IPs**.
1. Choose **Allocate New Address**, and then choose **Allocate**.
1. Note the Elastic IP address.
1. In the upper right of the **Elastic IPs** pane, click the X icon to close the pane.
## Step 2: Create a New VPC
Complete the following steps to create a new VPC with a public subnet and one private subnet.
**To create a new VPC**
1. Open the Amazon VPC console at [https://console.aws.amazon.com/vpc/](https://console.aws.amazon.com/vpc/).
1. In the navigation pane, choose **VPC Dashboard**.
1. Choose **Launch VPC Wizard**.
1. In **Step 1: Select a VPC Configuration**, choose **VPC with Public and Private Subnets**, and then choose **Select**.
1. In **Step 2: VPC with Public and Private Subnets**, configure the VPC as follows:
+ For **IPv4 CIDR block**, specify an IPv4 CIDR block for the VPC.
+ For **IPv6 CIDR block**, keep the default value, **No IPv6 CIDR Block**.
+ For **VPC name**, type a unique name for the VPC.
1. Configure the public subnet as follows:
+ For **Public subnet's IPv4 CIDR**, specify the CIDR block for the subnet.
+ For **Availability Zone**, keep the default value, **No Preference**.
+ For **Public subnet name**, type a name for the subnet; for example, `AppStream2 Public Subnet`.
1. Configure the first private subnet as follows:
+ For **Private subnet's IPv4 CIDR**, specify the CIDR block for the subnet. Make a note of the value that you specify.
+ For **Availability Zone**, select a specific zone and make a note of the zone that you select.
+ For **Private subnet name**, type a name for the subnet; for example, `AppStream2 Private Subnet1`.
+ For the remaining fields, where applicable, keep the default values.
1. For **Elastic IP Allocation ID**, click in the text box and select the value that corresponds to the Elastic IP address that you created. This address is assigned to the NAT gateway. If you don't have an Elastic IP address, create one by using the Amazon VPC console at [https://console.aws.amazon.com/vpc/](https://console.aws.amazon.com/vpc/).
1. For **Service endpoints**, if an Amazon S3 endpoint is required for your environment, specify one. An S3 endpoint is required to provide users with access to [home folders](home-folders.md) or to enable [application settings persistence](app-settings-persistence.md) for your users in a private network.
To specify an Amazon S3 endpoint, do the following:
1. Choose **Add Endpoint**.
1. For **Service**, select the entry in the list that ends with "s3" (the `com.amazonaws.`*region*`.s3` entry that corresponds to the Region in which the VPC is being created).
1. For **Subnet**, choose **Private subnet**.
1. For **Policy**, keep the default value, **Full Access**.
1. For **Enable DNS hostnames**, keep the default value, **Yes**.
1. For **Hardware tenancy**, keep the default value, **Default**.
1. Choose **Create VPC**.
1. Note that it takes several minutes to set up your VPC. After the VPC is created, choose **OK**.
## Step 3: Add a Second Private Subnet
In the previous step ([Step 2: Create a New VPC](#vpc-with-private-and-public-subnets-nat)), you created a VPC with one public subnet and one private subnet. Perform the following steps to add a second private subnet. We recommend that you add a second private subnet in a different Availability Zone than your first private subnet.
1. In the navigation pane, choose **Subnets**.
1. Select the first private subnet that you created in the previous step. On the **Description** tab, below the list of subnets, make a note of the Availability Zone for this subnet.
1. On the upper left of the subnets pane, choose **Create Subnet**.
1. For **Name tag**, type a name for the private subnet; for example, `AppStream2 Private Subnet2`.
1. For **VPC**, select the VPC that you created in the previous step.
1. For **Availability Zone**, select an Availability Zone other than the one you are using for your first private subnet. Selecting a different Availability Zone increases fault tolerance and helps prevent insufficient capacity errors.
1. For **IPv4 CIDR block**, specify a unique CIDR block range for the new subnet. For example, if your first private subnet has an IPv4 CIDR block range of `10.0.1.0/24`, you could specify a CIDR block range of `10.0.2.0/24` for the new private subnet.
1. Choose **Create**.
1. After your subnet is created, choose **Close**.
## Step 4: Verify and Name Your Subnet Route Tables
After you've created and configured your VPC, complete the following steps to specify a name for your route tables, and to verify that:
+ The route table associated with the subnet in which your NAT gateway resides includes a route that points internet traffic to an internet gateway. This ensures that your NAT gateway can access the internet.
+ The route tables associated with your private subnets are configured to point internet traffic to the NAT gateway. This enables the streaming instances in your private subnets to communicate with the internet.
1. In the navigation pane, choose **Subnets**, and select the public subnet that you created; for example, `WorkSpaces Applications Public Subnet`.
1. On the **Route Table** tab, choose the ID of the route table; for example, `rtb-12345678`.
1. Select the route table. Under **Name**, choose the edit icon (the pencil), and type a name (for example, `appstream2-public-routetable`), and then select the check mark to save the name.
1. With the public route table still selected, on the **Routes** tab, verify that there is one route for local traffic and another route that sends all other traffic to the internet gateway for the VPC. The following table describes these two routes:
[\[See the AWS documentation website for more details\]](http://docs.aws.amazon.com/appstream2/latest/developerguide/create-configure-new-vpc-with-private-public-subnets-nat.html)
1. In the navigation pane, choose **Subnets**, and select the first private subnet that you created (for example, `AppStream2 Private Subnet1`).
1. On the **Route Table** tab, choose the ID of the route table.
1. Select the route table. Under **Name**, choose the edit icon (the pencil), and enter a name (for example, `appstream2-private-routetable`), and then choose the check mark to save the name.
1. On the **Routes** tab, verify that the route table includes the following routes:
[\[See the AWS documentation website for more details\]](http://docs.aws.amazon.com/appstream2/latest/developerguide/create-configure-new-vpc-with-private-public-subnets-nat.html)
1. In the navigation pane, choose **Subnets**, and select the second private subnet that you created (for example, `AppStream2 Private Subnet2`).
1. On the **Route Table** tab, verify that the route table is the private route table (for example, `appstream2-private-routetable`). If the route table is different, choose **Edit** and select this route table.
**Next Steps**
To enable your fleet instances, app block builders, and image builders to access the internet, complete the steps in [Enable Internet Access for Your Fleet, Image Builder, or App Block Builder in Amazon WorkSpaces Applications](managing-network-manual-enable-internet-access.md).