Amazon Monitron is no longer open to new customers. Existing customers can continue to use the service as normal. For capabilities similar to Amazon Monitron, see our [blog post](https://aws.amazon.com/blogs/machine-learning/maintain-access-and-consider-alternatives-for-amazon-monitron).

# Resetting the Ethernet gateway to factory settings
<a name="commissioning-button-ethernet"></a>

If you re-use a gateway that was deleted from Amazon Monitron, use the commissioning button to reset the gateway to factory settings. This prepares the gateway to be used again for Amazon Monitron.

**Topics**
+ [Resetting the Ethernet gateway to factory settings (option 1)](#commissioning-button-ethernet-1)
+ [Resetting the Ethernet gateway to factory settings (option 2)](#commissioning-button-ethernet-2)

## Resetting the Ethernet gateway to factory settings (option 1)
<a name="commissioning-button-ethernet-1"></a>

1. Unplug the Ethernet cable from the gateway.

1. Hold down the **Config** button.

1. Plug the Ethernet cable back into the gateway.

   When the LED lights start slowly blinking, alternating orange and blue, release the **Config** button. The gateway is reset.

## Resetting the Ethernet gateway to factory settings (option 2)
<a name="commissioning-button-ethernet-2"></a>

1. Hold down the **Config** button.

1. Press the reset button.

1. When the led lights start slowly blinking, alternating orange and blue, release both buttons.