Restrict access to an AWS Elemental MediaStore origin - Amazon CloudFront
Create a new origin access controlAdvanced settings for origin access control

Restrict access to an AWS Elemental MediaStore origin

CloudFront provides origin access control (OAC) for restricting access to an AWS Elemental MediaStore origin.

Create a new origin access control

Complete the steps described in the following topics to set up a new origin access control in CloudFront.

Prerequisites

Before you create and set up origin access control, you must have a CloudFront distribution with a MediaStore origin.

Grant CloudFront permission to access the MediaStore origin

Before you create an origin access control or set it up in a CloudFront distribution, make sure that CloudFront has permission to access the MediaStore origin. Do this after creating a CloudFront distribution, but before adding the OAC to the MediaStore origin in the distribution configuration.

Use a MediaStore container policy to allow the CloudFront service principal (cloudfront.amazonaws.com) to access the origin. Use a Condition element in the policy to allow CloudFront to access the MediaStore container only when the request is on behalf of the CloudFront distribution that contains the MediaStore origin. This is the distribution with the MediaStore origin that you want to add OAC to.

The following are examples of MediaStore container policies that allow a CloudFront distribution to access a MediaStore origin.

Example MediaStore container policy that allows read-only access for a CloudFront distribution with OAC enabled
JSON
{
        "Version": "2012-10-17",
        "Statement": [
            {
                "Sid": "AllowCloudFrontServicePrincipalReadOnly",
                "Effect": "Allow",
                "Principal": {
                  "Service": "cloudfront.amazonaws.com"
                },
                "Action": [ 
                  "mediastore:GetObject"
                ],
                "Resource": "arn:aws:mediastore:<region>:111122223333:container/<container name>/*",
                "Condition": {
                    "StringEquals": {
                      "AWS:SourceArn": "arn:aws:cloudfront::111122223333:distribution/<CloudFront distribution ID>"
                    },
                    "Bool": {
                      "aws:SecureTransport": "true"
                    }
                }
            }
        ]
}
Example MediaStore container policy that allows read and write access for a CloudFront distribution with OAC enabled
JSON
{
        "Version": "2012-10-17",
        "Statement": [
            {
                "Sid": "AllowCloudFrontServicePrincipalReadWrite",
                "Effect": "Allow",
                "Principal": {
                  "Service": "cloudfront.amazonaws.com"
                },
                "Action": [ 
                  "mediastore:GetObject",
                  "mediastore:PutObject"
                ],
                "Resource": "arn:aws:mediastore:<region>:111122223333:container/<container name>/*",
                "Condition": {
                    "StringEquals": {
                      "AWS:SourceArn": "arn:aws:cloudfront::111122223333:distribution/<CloudFront distribution ID>"
                    },
                    "Bool": {
                      "aws:SecureTransport": "true"
                    }
                }
            }
        ]
}
Note

To allow write access, you must configure Allowed HTTP methods to include PUT in your CloudFront distribution's behavior settings.

Create the origin access control

To create an OAC, you can use the AWS Management Console, AWS CloudFormation, the AWS CLI, or the CloudFront API.

Console
To create an origin access control

  1. Sign in to the AWS Management Console and open the CloudFront console at https://console.aws.amazon.com/cloudfront/v4/home.

  2. In the navigation pane, choose Origin access.

  3. Choose Create control setting.

  4. On the Create control setting form, do the following:

    1. In the Details pane, enter a Name and (optionally) a Description for the origin access control.

    2. In the Settings pane, we recommend that you leave the default setting (Sign requests (recommended)). For more information, see Advanced settings for origin access control.

  5. Choose MediaStore from the Origin type dropdown.

  6. Choose Create.

    After the OAC is created, make note of the Name. You need this in the following procedure.

To add an origin access control to a MediaStore origin in a distribution

  1. Open the CloudFront console at https://console.aws.amazon.com/cloudfront/v4/home.

  2. Choose a distribution with a MediaStore origin that you want to add the OAC to, then choose the Origins tab.

  3. Select the MediaStore origin that you want to add the OAC to, then choose Edit.

  4. Select HTTPS only for your origin's Protocol.

  5. From the Origin access control dropdown menu, choose the OAC that you want to use.

  6. Choose Save changes.

The distribution starts deploying to all of the CloudFront edge locations. When an edge location receives the new configuration, it signs all requests that it sends to the MediaStore bucket origin.

CloudFormation

To create an origin access control (OAC) with AWS CloudFormation, use the AWS::CloudFront::OriginAccessControl resource type. The following example shows the AWS CloudFormation template syntax, in YAML format, for creating an origin access control.

Type: AWS::CloudFront::OriginAccessControl
Properties: 
  OriginAccessControlConfig: 
      Description: An optional description for the origin access control
      Name: ExampleOAC
      OriginAccessControlOriginType: mediastore
      SigningBehavior: always
      SigningProtocol: sigv4

For more information, see AWS::CloudFront::OriginAccessControl in the AWS CloudFormation User Guide.

CLI

To create an origin access control with the AWS Command Line Interface (AWS CLI), use the aws cloudfront create-origin-access-control command. You can use an input file to provide the input parameters for the command, rather than specifying each individual parameter as command line input.

To create an origin access control (CLI with input file)

  1. Use the following command to create a file that's named origin-access-control.yaml. This file contains all of the input parameters for the create-origin-access-control command.

    
aws cloudfront create-origin-access-control --generate-cli-skeleton yaml-input > origin-access-control.yaml

  2. Open the origin-access-control.yaml file that you just created. Edit the file to add a name for the OAC, a description (optional), and change the SigningBehavior to always. Then save the file.

    For information about other OAC settings, see Advanced settings for origin access control.

  3. Use the following command to create the origin access control using the input parameters from the origin-access-control.yaml file.

    
aws cloudfront create-origin-access-control --cli-input-yaml file://origin-access-control.yaml

    Make note of the Id value in the command output. You need it to add the OAC to a MediaStore origin in a CloudFront distribution.

To attach an OAC to a MediaStore origin in an existing distribution (CLI with input file)

  1. Use the following command to save the distribution configuration for the CloudFront distribution that you want to add the OAC to. The distribution must have a MediaStore origin.

    
aws cloudfront get-distribution-config --id <CloudFront distribution ID> --output yaml > dist-config.yaml

  2. Open the file that's named dist-config.yaml that you just created. Edit the file, making the following changes:

    • In the Origins object, add the OAC's ID to the field that's named OriginAccessControlId.

    • Remove the value from the field that's named OriginAccessIdentity, if one exists.

    • Rename the ETag field to IfMatch, but don't change the field's value.

    Save the file when finished.

  3. Use the following command to update the distribution to use the origin access control.

    
aws cloudfront update-distribution --id <CloudFront distribution ID> --cli-input-yaml file://dist-config.yaml

The distribution starts deploying to all of the CloudFront edge locations. When an edge location receives the new configuration, it signs all requests that it sends to the MediaStore origin.

API

To create an origin access control with the CloudFront API, use CreateOriginAccessControl. For more information about the fields that you specify in this API call, see the API reference documentation for your AWS SDK or other API client.

After you create an origin access control you can attach it to a MediaStore origin in a distribution, using one of the following API calls:

For both of these API calls, provide the origin access control ID in the OriginAccessControlId field, inside an origin. For more information about the other fields that you specify in these API calls, see All distribution settings reference and the API reference documentation for your AWS SDK or other API client.

Advanced settings for origin access control

The CloudFront origin access control feature includes advanced settings that are intended only for specific use cases. Use the recommended settings unless you have a specific need for the advanced settings.

Origin access control contains a setting named Signing behavior (in the console), or SigningBehavior (in the API, CLI, and AWS CloudFormation). This setting provides the following options:

Always sign origin requests (recommended setting)

We recommend using this setting, named Sign requests (recommended) in the console, or always in the API, CLI, and AWS CloudFormation. With this setting, CloudFront always signs all requests that it sends to the MediaStore origin.

Never sign origin requests

This setting is named Do not sign requests in the console, or never in the API, CLI, and AWS CloudFormation. Use this setting to turn off origin access control for all origins in all distributions that use this origin access control. This can save time and effort compared to removing an origin access control from all origins and distributions that use it, one by one. With this setting, CloudFront does not sign any requests that it sends to the MediaStore origin.

Warning

To use this setting, the MediaStore origin must be publicly accessible. If you use this setting with a MediaStore origin that's not publicly accessible, CloudFront cannot access the origin. The MediaStore origin returns errors to CloudFront and CloudFront passes those errors on to viewers. For more information, see the example MediaStore container policy for Public read access over HTTPS.

Don't override the viewer (client) Authorization header

This setting is named Do not override authorization header in the console, or no-override in the API, CLI, and AWS CloudFormation. Use this setting when you want CloudFront to sign origin requests only when the corresponding viewer request does not include an Authorization header. With this setting, CloudFront passes on the Authorization header from the viewer request when one is present, but signs the origin request (adding its own Authorization header) when the viewer request doesn't include an Authorization header.

Warning

To pass along the Authorization header from the viewer request, you must add the Authorization header to a cache policy for all cache behaviors that use MediaStore origins associated with this origin access control.